summaryrefslogtreecommitdiff
path: root/sshconnect2.c
AgeCommit message (Collapse)Author
2012-09-07* New upstream release (http://www.openssh.com/txt/release-6.1).Colin Watson
- Enable pre-auth sandboxing by default for new installs. - Allow "PermitOpen none" to refuse all port-forwarding requests (closes: #543683).
2012-09-06merge 6.1p1Colin Watson
2012-06-30 - dtucker@cvs.openbsd.org 2012/06/22 12:30:26Damien Miller
[monitor.c sshconnect2.c] remove dead code following 'for (;;)' loops. From Steve.McClellan at radisys com, ok markus@
2011-09-06* New upstream release (http://www.openssh.org/txt/release-5.9).Colin Watson
- Introduce sandboxing of the pre-auth privsep child using an optional sshd_config(5) "UsePrivilegeSeparation=sandbox" mode that enables mandatory restrictions on the syscalls the privsep child can perform. - Add new SHA256-based HMAC transport integrity modes from http://www.ietf.org/id/draft-dbider-sha2-mac-for-ssh-02.txt. - The pre-authentication sshd(8) privilege separation slave process now logs via a socket shared with the master process, avoiding the need to maintain /dev/log inside the chroot (closes: #75043, #429243, #599240). - ssh(1) now warns when a server refuses X11 forwarding (closes: #504757). - sshd_config(5)'s AuthorizedKeysFile now accepts multiple paths, separated by whitespace (closes: #76312). The authorized_keys2 fallback is deprecated but documented (closes: #560156). - ssh(1) and sshd(8): set IPv6 traffic class from IPQoS, as well as IPv4 ToS/DSCP (closes: #498297). - ssh-add(1) now accepts keys piped from standard input. E.g. "ssh-add - < /path/to/key" (closes: #229124). - Clean up lost-passphrase text in ssh-keygen(1) (closes: #444691). - Say "required" rather than "recommended" in unprotected-private-key warning (LP: #663455).
2011-09-06merge 5.9p1Colin Watson
2011-05-29 - djm@cvs.openbsd.org 2011/05/24 07:15:47Damien Miller
[readconf.c readconf.h ssh.c ssh_config.5 sshconnect.c sshconnect2.c] Remove undocumented legacy options UserKnownHostsFile2 and GlobalKnownHostsFile2 by making UserKnownHostsFile/GlobalKnownHostsFile accept multiple paths per line and making their defaults include known_hosts2; ok markus
2011-05-15 - djm@cvs.openbsd.org 2011/05/06 02:05:41Damien Miller
[sshconnect2.c] fix memory leak; bz#1849 ok dtucker@
2011-01-24* New upstream release (http://www.openssh.org/txt/release-5.7):Colin Watson
- Implement Elliptic Curve Cryptography modes for key exchange (ECDH) and host/user keys (ECDSA) as specified by RFC5656. ECDH and ECDSA offer better performance than plain DH and DSA at the same equivalent symmetric key length, as well as much shorter keys. - sftp(1)/sftp-server(8): add a protocol extension to support a hard link operation. It is available through the "ln" command in the client. The old "ln" behaviour of creating a symlink is available using its "-s" option or through the preexisting "symlink" command. - scp(1): Add a new -3 option to scp: Copies between two remote hosts are transferred through the local host (closes: #508613). - ssh(1): "atomically" create the listening mux socket by binding it on a temporary name and then linking it into position after listen() has succeeded. This allows the mux clients to determine that the server socket is either ready or stale without races (closes: #454784). Stale server sockets are now automatically removed (closes: #523250). - ssh(1): install a SIGCHLD handler to reap expired child process (closes: #594687). - ssh(1)/ssh-agent(1): honour $TMPDIR for client xauth and ssh-agent temporary directories (closes: #357469, although only if you arrange for ssh-agent to actually see $TMPDIR since the setgid bit will cause it to be stripped off).
2011-01-24merge 5.7p1Colin Watson
2011-01-24import openssh-5.6p1-gsskex-all-20110101.patchColin Watson
2010-12-01 - djm@cvs.openbsd.org 2010/11/29 23:45:51Damien Miller
[auth.c hostfile.c hostfile.h ssh.c ssh_config.5 sshconnect.c] [sshconnect.h sshconnect2.c] automatically order the hostkeys requested by the client based on which hostkeys are already recorded in known_hosts. This avoids hostkey warnings when connecting to servers with new ECDSA keys that are preferred by default; with markus@
2010-09-24 - djm@cvs.openbsd.org 2010/09/22 05:01:30Damien Miller
[kex.c kex.h kexecdh.c kexecdhc.c kexecdhs.c readconf.c readconf.h] [servconf.c servconf.h ssh_config.5 sshconnect2.c sshd.c sshd_config.5] add a KexAlgorithms knob to the client and server configuration to allow selection of which key exchange methods are used by ssh(1) and sshd(8) and their order of preference. ok markus@
2010-08-31 - djm@cvs.openbsd.org 2010/08/31 11:54:45Damien Miller
[PROTOCOL PROTOCOL.agent PROTOCOL.certkeys auth2-jpake.c authfd.c] [authfile.c buffer.h dns.c kex.c kex.h key.c key.h monitor.c] [monitor_wrap.c myproposal.h packet.c packet.h pathnames.h readconf.c] [ssh-add.1 ssh-add.c ssh-agent.1 ssh-agent.c ssh-keygen.1 ssh-keygen.c] [ssh-keyscan.1 ssh-keyscan.c ssh-keysign.8 ssh.1 ssh.c ssh2.h] [ssh_config.5 sshconnect.c sshconnect2.c sshd.8 sshd.c sshd_config.5] [uuencode.c uuencode.h bufec.c kexecdh.c kexecdhc.c kexecdhs.c ssh-ecdsa.c] Implement Elliptic Curve Cryptography modes for key exchange (ECDH) and host/user keys (ECDSA) as specified by RFC5656. ECDH and ECDSA offer better performance than plain DH and DSA at the same equivalent symmetric key length, as well as much shorter keys. Only the mandatory sections of RFC5656 are implemented, specifically the three REQUIRED curves nistp256, nistp384 and nistp521 and only ECDH and ECDSA. Point compression (optional in RFC5656 is NOT implemented). Certificate host and user keys using the new ECDSA key types are supported. Note that this code has not been tested for interoperability and may be subject to change. feedback and ok markus@
2010-08-23* New upstream release (http://www.openssh.com/txt/release-5.6):Colin Watson
- Added a ControlPersist option to ssh_config(5) that automatically starts a background ssh(1) multiplex master when connecting. This connection can stay alive indefinitely, or can be set to automatically close after a user-specified duration of inactivity (closes: #335697, #350898, #454787, #500573, #550262). - Support AuthorizedKeysFile, AuthorizedPrincipalsFile, HostbasedUsesNameFromPacketOnly, and PermitTunnel in sshd_config(5) Match blocks (closes: #549858). - sftp(1): fix ls in working directories that contain globbing characters in their pathnames (LP: #530714).
2010-08-23merge 5.6p1Colin Watson
2010-05-10 - djm@cvs.openbsd.org 2010/04/26 22:28:24Damien Miller
[sshconnect2.c] bz#1502: authctxt.success is declared as an int, but passed by reference to function that accepts sig_atomic_t*. Convert it to the latter; ok markus@ dtucker@
2010-04-16 - djm@cvs.openbsd.org 2010/04/16 01:47:26Damien Miller
[PROTOCOL.certkeys auth-options.c auth-options.h auth-rsa.c] [auth2-pubkey.c authfd.c key.c key.h myproposal.h ssh-add.c] [ssh-agent.c ssh-dss.c ssh-keygen.1 ssh-keygen.c ssh-rsa.c] [sshconnect.c sshconnect2.c sshd.c] revised certificate format ssh-{dss,rsa}-cert-v01@openssh.com with the following changes: move the nonce field to the beginning of the certificate where it can better protect against chosen-prefix attacks on the signature hash Rename "constraints" field to "critical options" Add a new non-critical "extensions" field Add a serial number The older format is still support for authentication and cert generation (use "ssh-keygen -t v00 -s ca_key ..." to generate a v00 certificate) ok markus@
2010-04-16 - djm@cvs.openbsd.org 2010/04/10 02:10:56Damien Miller
[sshconnect2.c] show the key type that we are offering in debug(), helps distinguish between certs and plain keys as the path to the private key is usually the same.
2010-03-31* New upstream release (LP: #535029).Colin Watson
- After a transition period of about 10 years, this release disables SSH protocol 1 by default. Clients and servers that need to use the legacy protocol must explicitly enable it in ssh_config / sshd_config or on the command-line. - Remove the libsectok/OpenSC-based smartcard code and add support for PKCS#11 tokens. This support is enabled by default in the Debian packaging, since it now doesn't involve additional library dependencies (closes: #231472, LP: #16918). - Add support for certificate authentication of users and hosts using a new, minimal OpenSSH certificate format (closes: #482806). - Added a 'netcat mode' to ssh(1): "ssh -W host:port ...". - Add the ability to revoke keys in sshd(8) and ssh(1). (For the Debian package, this overlaps with the key blacklisting facility added in openssh 1:4.7p1-9, but with different file formats and slightly different scopes; for the moment, I've roughly merged the two.) - Various multiplexing improvements, including support for requesting port-forwardings via the multiplex protocol (closes: #360151). - Allow setting an explicit umask on the sftp-server(8) commandline to override whatever default the user has (closes: #496843). - Many sftp client improvements, including tab-completion, more options, and recursive transfer support for get/put (LP: #33378). The old mget/mput commands never worked properly and have been removed (closes: #270399, #428082). - Do not prompt for a passphrase if we fail to open a keyfile, and log the reason why the open failed to debug (closes: #431538). - Prevent sftp from crashing when given a "-" without a command. Also, allow whitespace to follow a "-" (closes: #531561).
2010-03-31merge 5.4p1Colin Watson
2010-03-08Drop compatibility with the old gssapi mechanism used in ssh-krb5 <<Colin Watson
3.8.1p1-1. Simon Wilkinson refused this patch since the old gssapi mechanism was removed due to a serious security hole, and since these versions of ssh-krb5 are no longer security-supported by Debian I don't think there's any point keeping client compatibility for them.
2010-02-27 - OpenBSD CVS SyncDamien Miller
- djm@cvs.openbsd.org 2010/02/26 20:29:54 [PROTOCOL PROTOCOL.agent PROTOCOL.certkeys addrmatch.c auth-options.c] [auth-options.h auth.h auth2-pubkey.c authfd.c dns.c dns.h hostfile.c] [hostfile.h kex.h kexdhs.c kexgexs.c key.c key.h match.h monitor.c] [myproposal.h servconf.c servconf.h ssh-add.c ssh-agent.c ssh-dss.c] [ssh-keygen.1 ssh-keygen.c ssh-rsa.c ssh.1 ssh.c ssh2.h sshconnect.c] [sshconnect2.c sshd.8 sshd.c sshd_config.5] Add support for certificate key types for users and hosts. OpenSSH certificate key types are not X.509 certificates, but a much simpler format that encodes a public key, identity information and some validity constraints and signs it with a CA key. CA keys are regular SSH keys. This certificate style avoids the attack surface of X.509 certificates and is very easy to deploy. Certified host keys allow automatic acceptance of new host keys when a CA certificate is marked as sh/known_hosts. see VERIFYING HOST KEYS in ssh(1) for details. Certified user keys allow authentication of users when the signing CA key is marked as trusted in authorized_keys. See "AUTHORIZED_KEYS FILE FORMAT" in sshd(8) for details. Certificates are minted using ssh-keygen(1), documentation is in the "CERTIFICATES" section of that manpage. Documentation on the format of certificates is in the file PROTOCOL.certkeys feedback and ok markus@
2010-01-24* New upstream release.Colin Watson
* Update to GSSAPI patch from http://www.sxw.org.uk/computing/patches/openssh-5.3p1-gsskex-all-20100124.patch.
2010-01-24import openssh-5.3p1-gsskex-all-20100124.patchColin Watson
2010-01-13 - dtucker@cvs.openbsd.org 2010/01/13 01:20:20Darren Tucker
[canohost.c ssh-keysign.c sshconnect2.c] Make HostBased authentication work with a ProxyCommand. bz #1569, patch from imorgan at nas nasa gov, ok djm@
2010-01-12 - dtucker@cvs.openbsd.org 2010/01/11 04:46:45Darren Tucker
[authfile.c sshconnect2.c] Do not prompt for a passphrase if we fail to open a keyfile, and log the reason the open failed to debug. bz #1693, found by tj AT castaglia org, ok djm@
2010-01-08 - dtucker@cvs.openbsd.org 2010/01/04 01:45:30Darren Tucker
[sshconnect2.c] Don't escape backslashes in the SSH2 banner. bz#1533, patch from Michal Gorny via Gentoo.
2010-01-08 - dtucker@cvs.openbsd.org 2009/12/06 23:41:15Darren Tucker
[sshconnect2.c] zap unused variable and strlen; from Steve McClellan, ok djm
2010-01-08 - dtucker@cvs.openbsd.org 2009/11/20 00:59:36Darren Tucker
[sshconnect2.c] Use the HostKeyAlias when prompting for passwords. bz#1039, ok djm@
2010-01-08 - dtucker@cvs.openbsd.org 2009/11/10 04:30:45Darren Tucker
[sshconnect2.c channels.c sshconnect.c] Set close-on-exec on various descriptors so they don't get leaked to child processes. bz #1643, patch from jchadima at redhat, ok deraadt.
2010-01-08 - andreas@cvs.openbsd.org 2009/10/24 11:13:54Darren Tucker
[sshconnect2.c kex.h kex.c] Let the client detect if the server supports roaming by looking for the resume@appgate.com kex algorithm. ok markus@
2010-01-02fix gssapi-keyex and gssapi methods following JPAKEColin Watson
2010-01-02Don't duplicate backslashes when displaying server banner (thanks,Colin Watson
Michał Górny; closes: #505378, LP: #425346).
2010-01-01* New upstream release (closes: #536182). Yes, I know 5.3p1 has been outColin Watson
for a while, but there's no GSSAPI patch available for it yet. - Change the default cipher order to prefer the AES CTR modes and the revised "arcfour256" mode to CBC mode ciphers that are susceptible to CPNI-957037 "Plaintext Recovery Attack Against SSH". - Add countermeasures to mitigate CPNI-957037-style attacks against the SSH protocol's use of CBC-mode ciphers. Upon detection of an invalid packet length or Message Authentication Code, ssh/sshd will continue reading up to the maximum supported packet length rather than immediately terminating the connection. This eliminates most of the known differences in behaviour that leaked information about the plaintext of injected data which formed the basis of this attack (closes: #506115, LP: #379329). - ForceCommand directive now accepts commandline arguments for the internal-sftp server (closes: #524423, LP: #362511). - Add AllowAgentForwarding to available Match keywords list (closes: #540623). - Make ssh(1) send the correct channel number for SSH2_MSG_CHANNEL_SUCCESS and SSH2_MSG_CHANNEL_FAILURE messages to avoid triggering 'Non-public channel' error messages on sshd(8) in openssh-5.1. - Avoid printing 'Non-public channel' warnings in sshd(8), since the ssh(1) has sent incorrect channel numbers since ~2004 (this reverts a behaviour introduced in openssh-5.1; closes: #496017). * Update to GSSAPI patch from http://www.sxw.org.uk/computing/patches/openssh-5.2p1-gsskex-all-20090726.patch, including cascading credentials support (LP: #416958).
2010-01-01import openssh-5.2p1-gsskex-all-20090726.patchColin Watson
2009-12-29import openssh-5.1p1-gsskex-cjwatson-20080722.patchColin Watson
2009-12-29import openssh-4.7p1-gsskex-20070927.patchColin Watson
2009-12-29import openssh-4.6p1-gsskex-20070312.patchColin Watson
2009-12-29import openssh-4.3p2-gsskex-20060223.patchColin Watson
2009-12-29import openssh-4.2p1-gsskex-20050926-2.patchColin Watson
2009-12-29import openssh-4.0p1-gssapikex.patchColin Watson
2009-10-24 - djm@cvs.openbsd.org 2009/10/23 01:57:11Darren Tucker
[sshconnect2.c] disallow a hostile server from checking jpake auth by sending an out-of-sequence success message. (doesn't affect code enabled by default)
2009-03-06 - djm@cvs.openbsd.org 2009/03/05 07:18:19Damien Miller
[auth2-jpake.c jpake.c jpake.h monitor_wrap.c monitor_wrap.h schnorr.c] [sshconnect2.c] refactor the (disabled) Schnorr proof code to make it a little more generally useful
2008-11-05 - djm@cvs.openbsd.org 2008/11/04 08:22:13Damien Miller
[auth.h auth2.c monitor.c monitor.h monitor_wrap.c monitor_wrap.h] [readconf.c readconf.h servconf.c servconf.h ssh2.h ssh_config.5] [sshconnect2.c sshd_config.5 jpake.c jpake.h schnorr.c auth2-jpake.c] [Makefile.in] Add support for an experimental zero-knowledge password authentication method using the J-PAKE protocol described in F. Hao, P. Ryan, "Password Authenticated Key Exchange by Juggling", 16th Workshop on Security Protocols, Cambridge, April 2008. This method allows password-based authentication without exposing the password to the server. Instead, the client and server exchange cryptographic proofs to demonstrate of knowledge of the password while revealing nothing useful to an attacker or compromised endpoint. This is experimental, work-in-progress code and is presently compiled-time disabled (turn on -DJPAKE in Makefile.inc). "just commit it. It isn't too intrusive." deraadt@
2008-11-03 - djm@cvs.openbsd.org 2008/11/01 04:50:08Damien Miller
[sshconnect2.c] sprinkle ARGSUSED on dispatch handlers nuke stale unusued prototype
2008-11-03aadt@cvs.openbsd.org 2008/10/03 23:56:28Damien Miller
[sshconnect2.c] Repair strnvis() buffersize of 4*n+1, with termination gauranteed by the function. spotted by des@freebsd, who commited an incorrect fix to the freebsd tree and (as is fairly typical) did not report the problem to us. But this fix is correct. ok djm
2008-11-03 - markus@cvs.openbsd.org 2008/07/31 14:48:28Damien Miller
[sshconnect2.c] don't allocate space for empty banners; report t8m at centrum.cz; ok deraadt
2008-09-29Fix handling of zero-length server banners (thanks, Tomas Mraz; closes:Colin Watson
#497026).
2008-07-22* New upstream release (closes: #474301). Important changes not previouslyColin Watson
backported to 4.7p1: - 4.9/4.9p1 (http://www.openssh.com/txt/release-4.9): + Added chroot(2) support for sshd(8), controlled by a new option "ChrootDirectory" (closes: #139047, LP: #24777). + Linked sftp-server(8) into sshd(8). The internal sftp server is used when the command "internal-sftp" is specified in a Subsystem or ForceCommand declaration. When used with ChrootDirectory, the internal sftp server requires no special configuration of files inside the chroot environment. + Added a protocol extension method "posix-rename@openssh.com" for sftp-server(8) to perform POSIX atomic rename() operations; sftp(1) prefers this if available (closes: #308561). + Removed the fixed limit of 100 file handles in sftp-server(8). + ssh(8) will now skip generation of SSH protocol 1 ephemeral server keys when in inetd mode and protocol 2 connections are negotiated. This speeds up protocol 2 connections to inetd-mode servers that also allow Protocol 1. + Accept the PermitRootLogin directive in a sshd_config(5) Match block. Allows for, e.g. permitting root only from the local network. + Reworked sftp(1) argument splitting and escaping to be more internally consistent (i.e. between sftp commands) and more consistent with sh(1). Please note that this will change the interpretation of some quoted strings, especially those with embedded backslash escape sequences. + Support "Banner=none" in sshd_config(5) to disable sending of a pre-login banner (e.g. in a Match block). + ssh(1) ProxyCommands are now executed with $SHELL rather than /bin/sh. + ssh(1)'s ConnectTimeout option is now applied to both the TCP connection and the SSH banner exchange (previously it just covered the TCP connection). This allows callers of ssh(1) to better detect and deal with stuck servers that accept a TCP connection but don't progress the protocol, and also makes ConnectTimeout useful for connections via a ProxyCommand. + scp(1) incorrectly reported "stalled" on slow copies (closes: #140828). + scp(1) date underflow for timestamps before epoch. + ssh(1) used the obsolete SIG DNS RRtype for host keys in DNS, instead of the current standard RRSIG. + Correctly drain ACKs when a sftp(1) upload write fails midway, avoids a fatal() exit from what should be a recoverable condition. + Fixed ssh-keygen(1) selective host key hashing (i.e. "ssh-keygen -HF hostname") to not include any IP address in the data to be hashed. + Make ssh(1) skip listening on the IPv6 wildcard address when a binding address of 0.0.0.0 is used against an old SSH server that does not support the RFC4254 syntax for wildcard bind addresses. + Enable IPV6_V6ONLY socket option on sshd(8) listen socket, as is already done for X11/TCP forwarding sockets (closes: #439661). + Fix FD leak that could hang a ssh(1) connection multiplexing master. + Make ssh(1) -q option documentation consistent with reality. + Fixed sshd(8) PAM support not calling pam_session_close(), or failing to call it with root privileges (closes: #372680). + Fix activation of OpenSSL engine support when requested in configure (LP: #119295). - 5.1/5.1p1 (http://www.openssh.com/txt/release-5.1): + Introduce experimental SSH Fingerprint ASCII Visualisation to ssh(1) and ssh-keygen(1). Visual fingerprint display is controlled by a new ssh_config(5) option "VisualHostKey". The intent is to render SSH host keys in a visual form that is amenable to easy recall and rejection of changed host keys. + sshd_config(5) now supports CIDR address/masklen matching in "Match address" blocks, with a fallback to classic wildcard matching. + sshd(8) now supports CIDR matching in ~/.ssh/authorized_keys from="..." restrictions, also with a fallback to classic wildcard matching. + Added an extended test mode (-T) to sshd(8) to request that it write its effective configuration to stdout and exit. Extended test mode also supports the specification of connection parameters (username, source address and hostname) to test the application of sshd_config(5) Match rules. + ssh(1) now prints the number of bytes transferred and the overall connection throughput for SSH protocol 2 sessions when in verbose mode (previously these statistics were displayed for protocol 1 connections only). + sftp-server(8) now supports extension methods statvfs@openssh.com and fstatvfs@openssh.com that implement statvfs(2)-like operations. + sftp(1) now has a "df" command to the sftp client that uses the statvfs@openssh.com to produce a df(1)-like display of filesystem space and inode utilisation (requires statvfs@openssh.com support on the server). + Added a MaxSessions option to sshd_config(5) to allow control of the number of multiplexed sessions supported over a single TCP connection. This allows increasing the number of allowed sessions above the previous default of 10, disabling connection multiplexing (MaxSessions=1) or disallowing login/shell/subsystem sessions entirely (MaxSessions=0). + Added a no-more-sessions@openssh.com global request extension that is sent from ssh(1) to sshd(8) when the client knows that it will never request another session (i.e. when session multiplexing is disabled). This allows a server to disallow further session requests and terminate the session in cases where the client has been hijacked. + ssh-keygen(1) now supports the use of the -l option in combination with -F to search for a host in ~/.ssh/known_hosts and display its fingerprint. + ssh-keyscan(1) now defaults to "rsa" (protocol 2) keys, instead of "rsa1". + Added an AllowAgentForwarding option to sshd_config(8) to control whether authentication agent forwarding is permitted. Note that this is a loose control, as a client may install their own unofficial forwarder. + ssh(1) and sshd(8): avoid unnecessary malloc/copy/free when receiving network data, resulting in a ~10% speedup. + ssh(1) and sshd(8) will now try additional addresses when connecting to a port forward destination whose DNS name resolves to more than one address. The previous behaviour was to try the only first address and give up if that failed. + ssh(1) and sshd(8) now support signalling that channels are half-closed for writing, through a channel protocol extension notification "eow@openssh.com". This allows propagation of closed file descriptors, so that commands such as "ssh -2 localhost od /bin/ls | true" do not send unnecessary data over the wire. + sshd(8): increased the default size of ssh protocol 1 ephemeral keys from 768 to 1024 bits. + When ssh(1) has been requested to fork after authentication ("ssh -f") with ExitOnForwardFailure enabled, delay the fork until after replies for any -R forwards have been seen. Allows for robust detection of -R forward failure when using -f. + "Match group" blocks in sshd_config(5) now support negation of groups. E.g. "Match group staff,!guests". + sftp(1) and sftp-server(8) now allow chmod-like operations to set set[ug]id/sticky bits. + The MaxAuthTries option is now permitted in sshd_config(5) match blocks. + Multiplexed ssh(1) sessions now support a subset of the ~ escapes that are available to a primary connection. + ssh(1) connection multiplexing will now fall back to creating a new connection in most error cases (closes: #352830). + Make ssh(1) deal more gracefully with channel requests that fail. Previously it would optimistically assume that requests would always succeed, which could cause hangs if they did not (e.g. when the server runs out of file descriptors). + ssh(1) now reports multiplexing errors via the multiplex slave's stderr where possible (subject to LogLevel in the mux master). + Prevent sshd(8) from erroneously applying public key restrictions leaned from ~/.ssh/authorized_keys to other authentication methods when public key authentication subsequently fails (LP: #161047). + Fixed an UMAC alignment problem that manifested on Itanium platforms.
2008-07-17 - (djm) [sshconnect2.c] vis.h isn't available everywhereDamien Miller