summaryrefslogtreecommitdiff
path: root/sshconnect2.c
AgeCommit message (Collapse)Author
2008-07-22* New upstream release (closes: #474301). Important changes not previouslyColin Watson
backported to 4.7p1: - 4.9/4.9p1 (http://www.openssh.com/txt/release-4.9): + Added chroot(2) support for sshd(8), controlled by a new option "ChrootDirectory" (closes: #139047, LP: #24777). + Linked sftp-server(8) into sshd(8). The internal sftp server is used when the command "internal-sftp" is specified in a Subsystem or ForceCommand declaration. When used with ChrootDirectory, the internal sftp server requires no special configuration of files inside the chroot environment. + Added a protocol extension method "posix-rename@openssh.com" for sftp-server(8) to perform POSIX atomic rename() operations; sftp(1) prefers this if available (closes: #308561). + Removed the fixed limit of 100 file handles in sftp-server(8). + ssh(8) will now skip generation of SSH protocol 1 ephemeral server keys when in inetd mode and protocol 2 connections are negotiated. This speeds up protocol 2 connections to inetd-mode servers that also allow Protocol 1. + Accept the PermitRootLogin directive in a sshd_config(5) Match block. Allows for, e.g. permitting root only from the local network. + Reworked sftp(1) argument splitting and escaping to be more internally consistent (i.e. between sftp commands) and more consistent with sh(1). Please note that this will change the interpretation of some quoted strings, especially those with embedded backslash escape sequences. + Support "Banner=none" in sshd_config(5) to disable sending of a pre-login banner (e.g. in a Match block). + ssh(1) ProxyCommands are now executed with $SHELL rather than /bin/sh. + ssh(1)'s ConnectTimeout option is now applied to both the TCP connection and the SSH banner exchange (previously it just covered the TCP connection). This allows callers of ssh(1) to better detect and deal with stuck servers that accept a TCP connection but don't progress the protocol, and also makes ConnectTimeout useful for connections via a ProxyCommand. + scp(1) incorrectly reported "stalled" on slow copies (closes: #140828). + scp(1) date underflow for timestamps before epoch. + ssh(1) used the obsolete SIG DNS RRtype for host keys in DNS, instead of the current standard RRSIG. + Correctly drain ACKs when a sftp(1) upload write fails midway, avoids a fatal() exit from what should be a recoverable condition. + Fixed ssh-keygen(1) selective host key hashing (i.e. "ssh-keygen -HF hostname") to not include any IP address in the data to be hashed. + Make ssh(1) skip listening on the IPv6 wildcard address when a binding address of 0.0.0.0 is used against an old SSH server that does not support the RFC4254 syntax for wildcard bind addresses. + Enable IPV6_V6ONLY socket option on sshd(8) listen socket, as is already done for X11/TCP forwarding sockets (closes: #439661). + Fix FD leak that could hang a ssh(1) connection multiplexing master. + Make ssh(1) -q option documentation consistent with reality. + Fixed sshd(8) PAM support not calling pam_session_close(), or failing to call it with root privileges (closes: #372680). + Fix activation of OpenSSL engine support when requested in configure (LP: #119295). - 5.1/5.1p1 (http://www.openssh.com/txt/release-5.1): + Introduce experimental SSH Fingerprint ASCII Visualisation to ssh(1) and ssh-keygen(1). Visual fingerprint display is controlled by a new ssh_config(5) option "VisualHostKey". The intent is to render SSH host keys in a visual form that is amenable to easy recall and rejection of changed host keys. + sshd_config(5) now supports CIDR address/masklen matching in "Match address" blocks, with a fallback to classic wildcard matching. + sshd(8) now supports CIDR matching in ~/.ssh/authorized_keys from="..." restrictions, also with a fallback to classic wildcard matching. + Added an extended test mode (-T) to sshd(8) to request that it write its effective configuration to stdout and exit. Extended test mode also supports the specification of connection parameters (username, source address and hostname) to test the application of sshd_config(5) Match rules. + ssh(1) now prints the number of bytes transferred and the overall connection throughput for SSH protocol 2 sessions when in verbose mode (previously these statistics were displayed for protocol 1 connections only). + sftp-server(8) now supports extension methods statvfs@openssh.com and fstatvfs@openssh.com that implement statvfs(2)-like operations. + sftp(1) now has a "df" command to the sftp client that uses the statvfs@openssh.com to produce a df(1)-like display of filesystem space and inode utilisation (requires statvfs@openssh.com support on the server). + Added a MaxSessions option to sshd_config(5) to allow control of the number of multiplexed sessions supported over a single TCP connection. This allows increasing the number of allowed sessions above the previous default of 10, disabling connection multiplexing (MaxSessions=1) or disallowing login/shell/subsystem sessions entirely (MaxSessions=0). + Added a no-more-sessions@openssh.com global request extension that is sent from ssh(1) to sshd(8) when the client knows that it will never request another session (i.e. when session multiplexing is disabled). This allows a server to disallow further session requests and terminate the session in cases where the client has been hijacked. + ssh-keygen(1) now supports the use of the -l option in combination with -F to search for a host in ~/.ssh/known_hosts and display its fingerprint. + ssh-keyscan(1) now defaults to "rsa" (protocol 2) keys, instead of "rsa1". + Added an AllowAgentForwarding option to sshd_config(8) to control whether authentication agent forwarding is permitted. Note that this is a loose control, as a client may install their own unofficial forwarder. + ssh(1) and sshd(8): avoid unnecessary malloc/copy/free when receiving network data, resulting in a ~10% speedup. + ssh(1) and sshd(8) will now try additional addresses when connecting to a port forward destination whose DNS name resolves to more than one address. The previous behaviour was to try the only first address and give up if that failed. + ssh(1) and sshd(8) now support signalling that channels are half-closed for writing, through a channel protocol extension notification "eow@openssh.com". This allows propagation of closed file descriptors, so that commands such as "ssh -2 localhost od /bin/ls | true" do not send unnecessary data over the wire. + sshd(8): increased the default size of ssh protocol 1 ephemeral keys from 768 to 1024 bits. + When ssh(1) has been requested to fork after authentication ("ssh -f") with ExitOnForwardFailure enabled, delay the fork until after replies for any -R forwards have been seen. Allows for robust detection of -R forward failure when using -f. + "Match group" blocks in sshd_config(5) now support negation of groups. E.g. "Match group staff,!guests". + sftp(1) and sftp-server(8) now allow chmod-like operations to set set[ug]id/sticky bits. + The MaxAuthTries option is now permitted in sshd_config(5) match blocks. + Multiplexed ssh(1) sessions now support a subset of the ~ escapes that are available to a primary connection. + ssh(1) connection multiplexing will now fall back to creating a new connection in most error cases (closes: #352830). + Make ssh(1) deal more gracefully with channel requests that fail. Previously it would optimistically assume that requests would always succeed, which could cause hangs if they did not (e.g. when the server runs out of file descriptors). + ssh(1) now reports multiplexing errors via the multiplex slave's stderr where possible (subject to LogLevel in the mux master). + Prevent sshd(8) from erroneously applying public key restrictions leaned from ~/.ssh/authorized_keys to other authentication methods when public key authentication subsequently fails (LP: #161047). + Fixed an UMAC alignment problem that manifested on Itanium platforms.
2008-07-17 - (djm) [sshconnect2.c] vis.h isn't available everywhereDamien Miller
2008-07-17 - djm@cvs.openbsd.org 2008/07/17 08:48:00Damien Miller
[sshconnect2.c] strnvis preauth banner; pointed out by mpf@ ok markus@
2008-06-02Check compromised key blacklist in ssh or ssh-add, as well as in theColin Watson
server (LP: #232391). To override the blacklist check in ssh temporarily, use 'ssh -o UseBlacklistedKeys=yes'; there is no override for the blacklist check in ssh-add.
2008-02-10 - djm@cvs.openbsd.org 2008/01/19 23:09:49Damien Miller
[readconf.c readconf.h sshconnect2.c] promote rekeylimit to a int64 so it can hold the maximum useful limit of 2^32; report and patch from Jan.Pechanec AT Sun.COM, ok dtucker@
2007-12-24fix compilation failure due to merge errorColin Watson
2007-12-24* New upstream release (closes: #453367).Colin Watson
- CVE-2007-4752: Prevent ssh(1) from using a trusted X11 cookie if creation of an untrusted cookie fails; found and fixed by Jan Pechanec (closes: #444738). - sshd(8) in new installations defaults to SSH Protocol 2 only. Existing installations are unchanged. - The SSH channel window size has been increased, and both ssh(1) sshd(8) now send window updates more aggressively. These improves performance on high-BDP (Bandwidth Delay Product) networks. - ssh(1) and sshd(8) now preserve MAC contexts between packets, which saves 2 hash calls per packet and results in 12-16% speedup for arcfour256/hmac-md5. - A new MAC algorithm has been added, UMAC-64 (RFC4418) as "umac-64@openssh.com". UMAC-64 has been measured to be approximately 20% faster than HMAC-MD5. - Failure to establish a ssh(1) TunnelForward is now treated as a fatal error when the ExitOnForwardFailure option is set. - ssh(1) returns a sensible exit status if the control master goes away without passing the full exit status. - When using a ProxyCommand in ssh(1), set the outgoing hostname with gethostname(2), allowing hostbased authentication to work. - Make scp(1) skip FIFOs rather than hanging (closes: #246774). - Encode non-printing characters in scp(1) filenames. These could cause copies to be aborted with a "protocol error". - Handle SIGINT in sshd(8) privilege separation child process to ensure that wtmp and lastlog records are correctly updated. - Report GSSAPI mechanism in errors, for libraries that support multiple mechanisms. - Improve documentation for ssh-add(1)'s -d option. - Rearrange and tidy GSSAPI code, removing server-only code being linked into the client. - Delay execution of ssh(1)'s LocalCommand until after all forwardings have been established. - In scp(1), do not truncate non-regular files. - Improve exit message from ControlMaster clients. - Prevent sftp-server(8) from reading until it runs out of buffer space, whereupon it would exit with a fatal error (closes: #365541). - pam_end() was not being called if authentication failed (closes: #405041). - Manual page datestamps updated (closes: #433181).
2007-06-12* New upstream release (closes: #395507, #397961, #420035). ImportantColin Watson
changes not previously backported to 4.3p2: - 4.4/4.4p1 (http://www.openssh.org/txt/release-4.4): + On portable OpenSSH, fix a GSSAPI authentication abort that could be used to determine the validity of usernames on some platforms. + Implemented conditional configuration in sshd_config(5) using the "Match" directive. This allows some configuration options to be selectively overridden if specific criteria (based on user, group, hostname and/or address) are met. So far a useful subset of post-authentication options are supported and more are expected to be added in future releases. + Add support for Diffie-Hellman group exchange key agreement with a final hash of SHA256. + Added a "ForceCommand" directive to sshd_config(5). Similar to the command="..." option accepted in ~/.ssh/authorized_keys, this forces the execution of the specified command regardless of what the user requested. This is very useful in conjunction with the new "Match" option. + Add a "PermitOpen" directive to sshd_config(5). This mirrors the permitopen="..." authorized_keys option, allowing fine-grained control over the port-forwardings that a user is allowed to establish. + Add optional logging of transactions to sftp-server(8). + ssh(1) will now record port numbers for hosts stored in ~/.ssh/known_hosts when a non-standard port has been requested (closes: #50612). + Add an "ExitOnForwardFailure" option to cause ssh(1) to exit (with a non-zero exit code) when requested port forwardings could not be established. + Extend sshd_config(5) "SubSystem" declarations to allow the specification of command-line arguments. + Replacement of all integer overflow susceptible invocations of malloc(3) and realloc(3) with overflow-checking equivalents. + Many manpage fixes and improvements. + Add optional support for OpenSSL hardware accelerators (engines), enabled using the --with-ssl-engine configure option. + Tokens in configuration files may be double-quoted in order to contain spaces (closes: #319639). + Move a debug() call out of a SIGCHLD handler, fixing a hang when the session exits very quickly (closes: #307890). + Fix some incorrect buffer allocation calculations (closes: #410599). + ssh-add doesn't ask for a passphrase if key file permissions are too liberal (closes: #103677). + Likewise, ssh doesn't ask either (closes: #99675). - 4.6/4.6p1 (http://www.openssh.org/txt/release-4.6): + sshd now allows the enabling and disabling of authentication methods on a per user, group, host and network basis via the Match directive in sshd_config. + Fixed an inconsistent check for a terminal when displaying scp progress meter (closes: #257524). + Fix "hang on exit" when background processes are running at the time of exit on a ttyful/login session (closes: #88337). * Update to current GSSAPI patch from http://www.sxw.org.uk/computing/patches/openssh-4.6p1-gsskex-20070312.patch; install ChangeLog.gssapi.
2007-05-20 - jolan@cvs.openbsd.org 2007/05/17 23:53:41Darren Tucker
[sshconnect2.c] djm owes me a vb and a tism cd for breaking ssh compilation
2007-05-20 - djm@cvs.openbsd.org 2007/05/17 20:48:13Darren Tucker
[sshconnect2.c] fall back to gethostname() when the outgoing connection is not on a socket, such as is the case when ProxyCommand is used. Gives hostbased auth an opportunity to work; bz#616, report and feedback stuart AT kaloram.com; ok markus@
2006-09-01 - (djm) [audit-bsm.c audit.c auth-bsdauth.c auth-chall.c auth-pam.c]Damien Miller
[auth-rsa.c auth-shadow.c auth-sia.c auth1.c auth2-chall.c] [auth2-gss.c auth2-kbdint.c auth2-none.c authfd.c authfile.c] [cipher-3des1.c cipher-aes.c cipher-bf1.c cipher-ctr.c clientloop.c] [dh.c dns.c entropy.c gss-serv-krb5.c gss-serv.c hostfile.c kex.c] [kexdhc.c kexdhs.c kexgexc.c kexgexs.c key.c loginrec.c mac.c] [md5crypt.c monitor.c monitor_wrap.c readconf.c rsa.c] [scard-opensc.c scard.c session.c ssh-add.c ssh-agent.c ssh-dss.c] [ssh-keygen.c ssh-keysign.c ssh-rsa.c ssh.c sshconnect.c] [sshconnect1.c sshconnect2.c sshd.c rc4.diff] [openbsd-compat/bsd-cray.c openbsd-compat/port-aix.c] [openbsd-compat/port-linux.c openbsd-compat/port-solaris.c] [openbsd-compat/port-uw.c] Lots of headers for SCO OSR6, mainly adding stdarg.h for log.h; compile problems reported by rac AT tenzing.org
2006-08-30 - dtucker@cvs.openbsd.org 2006/08/30 00:06:51Damien Miller
[sshconnect2.c] Fix regression where SSH2 banner is printed at loglevels ERROR and FATAL where previously it weren't. bz #1221, found by Dean Kopesky, ok djm@
2006-08-19 - djm@cvs.openbsd.org 2006/08/18 13:54:54Damien Miller
[gss-genr.c ssh-gss.h sshconnect2.c] bz #1218 - disable SPNEGO as per RFC4462; diff from simon AT sxw.org.uk ok markus@
2006-08-05 - deraadt@cvs.openbsd.org 2006/08/03 03:34:42Damien Miller
[OVERVIEW atomicio.c atomicio.h auth-bsdauth.c auth-chall.c auth-krb5.c] [auth-options.c auth-options.h auth-passwd.c auth-rh-rsa.c auth-rhosts.c] [auth-rsa.c auth-skey.c auth.c auth.h auth1.c auth2-chall.c auth2-gss.c] [auth2-hostbased.c auth2-kbdint.c auth2-none.c auth2-passwd.c ] [auth2-pubkey.c auth2.c authfd.c authfd.h authfile.c bufaux.c bufbn.c] [buffer.c buffer.h canohost.c channels.c channels.h cipher-3des1.c] [cipher-bf1.c cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c] [compress.c deattack.c dh.c dispatch.c dns.c dns.h fatal.c groupaccess.c] [groupaccess.h gss-genr.c gss-serv-krb5.c gss-serv.c hostfile.c kex.c] [kex.h kexdh.c kexdhc.c kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c] [key.h log.c log.h mac.c match.c md-sha256.c misc.c misc.h moduli.c] [monitor.c monitor_fdpass.c monitor_mm.c monitor_mm.h monitor_wrap.c] [monitor_wrap.h msg.c nchan.c packet.c progressmeter.c readconf.c] [readconf.h readpass.c rsa.c scard.c scard.h scp.c servconf.c servconf.h] [serverloop.c session.c session.h sftp-client.c sftp-common.c] [sftp-common.h sftp-glob.c sftp-server.c sftp.c ssh-add.c ssh-agent.c] [ssh-dss.c ssh-gss.h ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh-rsa.c] [ssh.c ssh.h sshconnect.c sshconnect.h sshconnect1.c sshconnect2.c] [sshd.c sshlogin.c sshlogin.h sshpty.c sshpty.h sshtty.c ttymodes.c] [uidswap.c uidswap.h uuencode.c uuencode.h xmalloc.c xmalloc.h] [loginrec.c loginrec.h openbsd-compat/port-aix.c openbsd-compat/port-tun.h] almost entirely get rid of the culture of ".h files that include .h files" ok djm, sort of ok stevesk makes the pain stop in one easy step NB. portable commit contains everything *except* removing includes.h, as that will take a fair bit more work as we move headers that are required for portability workarounds to defines.h. (also, this step wasn't "easy")
2006-08-05 - stevesk@cvs.openbsd.org 2006/08/01 23:22:48Damien Miller
[auth-passwd.c auth-rhosts.c auth-rsa.c auth.c auth.h auth1.c] [auth2-chall.c auth2-pubkey.c authfile.c buffer.c canohost.c] [channels.c clientloop.c dh.c dns.c dns.h hostfile.c kex.c kexdhc.c] [kexgexc.c kexgexs.c key.c key.h log.c misc.c misc.h moduli.c] [monitor_wrap.c packet.c progressmeter.c readconf.c readpass.c scp.c] [servconf.c session.c sftp-client.c sftp-common.c sftp-server.c sftp.c] [ssh-add.c ssh-agent.c ssh-keygen.c ssh-keyscan.c ssh.c sshconnect.c] [sshconnect1.c sshconnect2.c sshd.c sshlogin.c sshtty.c uuencode.c] [uuencode.h xmalloc.c] move #include <stdio.h> out of includes.h
2006-07-24 - stevesk@cvs.openbsd.org 2006/07/22 20:48:23Damien Miller
[atomicio.c auth-options.c auth-passwd.c auth-rhosts.c auth-rsa.c] [auth.c auth1.c auth2-chall.c auth2-hostbased.c auth2-passwd.c auth2.c] [authfd.c authfile.c bufaux.c bufbn.c buffer.c canohost.c channels.c] [cipher-3des1.c cipher-bf1.c cipher-ctr.c cipher.c clientloop.c] [compat.c deattack.c dh.c dns.c gss-genr.c gss-serv.c hostfile.c] [includes.h kex.c kexdhc.c kexdhs.c kexgexc.c kexgexs.c key.c log.c] [mac.c match.c md-sha256.c misc.c moduli.c monitor.c monitor_fdpass.c] [monitor_mm.c monitor_wrap.c msg.c nchan.c packet.c rsa.c] [progressmeter.c readconf.c readpass.c scp.c servconf.c serverloop.c] [session.c sftp-client.c sftp-common.c sftp-glob.c sftp-server.c sftp.c] [ssh-add.c ssh-agent.c ssh-dss.c ssh-keygen.c ssh-keyscan.c] [ssh-keysign.c ssh-rsa.c ssh.c sshconnect.c sshconnect1.c sshconnect2.c] [sshd.c sshlogin.c sshpty.c ttymodes.c uidswap.c xmalloc.c] move #include <string.h> out of includes.h
2006-07-24 - stevesk@cvs.openbsd.org 2006/07/20 15:26:15Damien Miller
[auth1.c serverloop.c session.c sshconnect2.c] missed some needed #include <unistd.h> when KERBEROS5=no; issue from massimo@cedoc.mo.it
2006-07-12 - stevesk@cvs.openbsd.org 2006/07/11 20:07:25Darren Tucker
[scp.c auth.c monitor.c serverloop.c sftp-server.c sshpty.c readpass.c sshd.c monitor_wrap.c monitor_fdpass.c ssh-agent.c ttymodes.c atomicio.c includes.h session.c sshlogin.c monitor_mm.c packet.c sshconnect2.c sftp-client.c nchan.c clientloop.c sftp.c misc.c canohost.c channels.c ssh-keygen.c progressmeter.c uidswap.c msg.c readconf.c sshconnect.c] move #include <errno.h> out of includes.h; ok markus@
2006-06-13 - markus@cvs.openbsd.org 2006/06/08 14:45:49Damien Miller
[readpass.c sshconnect.c sshconnect2.c uidswap.c uidswap.h] do not set the gid, noted by solar; ok djm
2006-06-13 - markus@cvs.openbsd.org 2006/06/06 10:20:20Damien Miller
[readpass.c sshconnect.c sshconnect.h sshconnect2.c uidswap.c] replace remaining setuid() calls with permanently_set_uid() and check seteuid() return values; report Marcus Meissner; ok dtucker djm
2006-06-13 - djm@cvs.openbsd.org 2006/05/08 10:49:48Damien Miller
[sshconnect2.c] uint32_t -> u_int32_t (which we use everywhere else) (Id sync only - portable already had this)
2006-05-12compiler warningsColin Watson
2006-05-12* Update to current GSSAPI patch fromColin Watson
http://www.sxw.org.uk/computing/patches/openssh-4.3p2-gsskex-20060223.patch (closes: #352042).
2006-05-12Merge 4.3p2 to the trunk.Colin Watson
2006-05-06 - dtucker@cvs.openbsd.org 2006/04/25 08:02:27Darren Tucker
[authfile.c authfile.h sshconnect2.c ssh.c sshconnect1.c] Prevent ssh from trying to open private keys with bad permissions more than once or prompting for their passphrases (which it subsequently ignores anyway), similar to a previous change in ssh-add. bz #1186, ok djm@
2006-03-26 - djm@cvs.openbsd.org 2006/03/25 13:17:03Damien Miller
[atomicio.c auth-bsdauth.c auth-chall.c auth-options.c auth-passwd.c] [auth-rh-rsa.c auth-rhosts.c auth-rsa.c auth-skey.c auth.c auth1.c] [auth2-chall.c auth2-hostbased.c auth2-kbdint.c auth2-none.c] [auth2-passwd.c auth2-pubkey.c auth2.c authfd.c authfile.c bufaux.c] [buffer.c canohost.c channels.c cipher-3des1.c cipher-bf1.c] [cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c compress.c] [deattack.c dh.c dispatch.c fatal.c groupaccess.c hostfile.c kex.c] [kexdh.c kexdhc.c kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c log.c] [mac.c match.c md-sha256.c misc.c monitor.c monitor_fdpass.c] [monitor_mm.c monitor_wrap.c msg.c nchan.c packet.c progressmeter.c] [readconf.c readpass.c rsa.c scard.c scp.c servconf.c serverloop.c] [session.c sftp-client.c sftp-common.c sftp-glob.c sftp-server.c] [sftp.c ssh-add.c ssh-agent.c ssh-dss.c ssh-keygen.c ssh-keyscan.c] [ssh-keysign.c ssh-rsa.c ssh.c sshconnect.c sshconnect1.c] [sshconnect2.c sshd.c sshlogin.c sshpty.c sshtty.c ttymodes.c] [uidswap.c uuencode.c xmalloc.c] Put $OpenBSD$ tags back (as comments) to replace the RCSID()s that Theo nuked - our scripts to sync -portable need them in the files
2006-03-26 - djm@cvs.openbsd.org 2006/03/25 00:05:41Damien Miller
[auth-bsdauth.c auth-skey.c auth.c auth2-chall.c channels.c] [clientloop.c deattack.c gss-genr.c kex.c key.c misc.c moduli.c] [monitor.c monitor_wrap.c packet.c scard.c sftp-server.c ssh-agent.c] [ssh-keyscan.c ssh.c sshconnect.c sshconnect2.c sshd.c uuencode.c] [xmalloc.c xmalloc.h] introduce xcalloc() and xasprintf() failure-checked allocations functions and use them throughout openssh xcalloc is particularly important because malloc(nmemb * size) is a dangerous idiom (subject to integer overflow) and it is time for it to die feedback and ok deraadt@
2006-03-26 - djm@cvs.openbsd.org 2006/03/19 07:41:30Damien Miller
[sshconnect2.c] memory leaks detected by Coverity via elad AT netbsd.org; deraadt@ ok
2006-03-26 - deraadt@cvs.openbsd.org 2006/03/19 18:51:18Damien Miller
[atomicio.c auth-bsdauth.c auth-chall.c auth-krb5.c auth-options.c] [auth-pam.c auth-passwd.c auth-rh-rsa.c auth-rhosts.c auth-rsa.c] [auth-shadow.c auth-skey.c auth.c auth1.c auth2-chall.c] [auth2-hostbased.c auth2-kbdint.c auth2-none.c auth2-passwd.c] [auth2-pubkey.c auth2.c authfd.c authfile.c bufaux.c buffer.c] [canohost.c channels.c cipher-3des1.c cipher-acss.c cipher-aes.c] [cipher-bf1.c cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c] [compress.c deattack.c dh.c dispatch.c dns.c entropy.c fatal.c] [groupaccess.c hostfile.c includes.h kex.c kexdh.c kexdhc.c] [kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c log.c loginrec.c] [loginrec.h logintest.c mac.c match.c md-sha256.c md5crypt.c misc.c] [monitor.c monitor_fdpass.c monitor_mm.c monitor_wrap.c msg.c] [nchan.c packet.c progressmeter.c readconf.c readpass.c rsa.c] [scard.c scp.c servconf.c serverloop.c session.c sftp-client.c] [sftp-common.c sftp-glob.c sftp-server.c sftp.c ssh-add.c] [ssh-agent.c ssh-dss.c ssh-keygen.c ssh-keyscan.c ssh-keysign.c] [ssh-rand-helper.c ssh-rsa.c ssh.c sshconnect.c sshconnect1.c] [sshconnect2.c sshd.c sshlogin.c sshpty.c sshtty.c ttymodes.c] [uidswap.c uuencode.c xmalloc.c openbsd-compat/bsd-arc4random.c] [openbsd-compat/bsd-closefrom.c openbsd-compat/bsd-cygwin_util.c] [openbsd-compat/bsd-getpeereid.c openbsd-compat/bsd-misc.c] [openbsd-compat/bsd-nextstep.c openbsd-compat/bsd-snprintf.c] [openbsd-compat/bsd-waitpid.c openbsd-compat/fake-rfc2553.c] RCSID() can die
2006-03-15 - (djm) [auth-pam.c clientloop.c includes.h monitor.c session.c]Damien Miller
[sftp-client.c ssh-keysign.c ssh.c sshconnect.c sshconnect2.c] [sshd.c openbsd-compat/bsd-misc.c openbsd-compat/bsd-openpty.c] [openbsd-compat/glob.c openbsd-compat/mktemp.c] [openbsd-compat/readpassphrase.c] Lots of include fixes for OpenSolaris
2006-03-15 - djm@cvs.openbsd.org 2006/03/07 09:07:40Damien Miller
[kex.c kex.h monitor.c myproposal.h ssh-keyscan.c sshconnect2.c sshd.c] Implement the diffie-hellman-group-exchange-sha256 key exchange method using the SHA256 code in libc (and wrapper to make it into an OpenSSL EVP), interop tested against CVS PuTTY NB. no portability bits committed yet
2006-03-15 - stevesk@cvs.openbsd.org 2006/02/20 17:02:44Damien Miller
[clientloop.c includes.h monitor.c progressmeter.c scp.c] [serverloop.c session.c sftp.c ssh-agent.c ssh.c sshd.c] move #include <signal.h> out of includes.h; ok markus@
2006-03-15 - stevesk@cvs.openbsd.org 2006/02/10 01:44:27Damien Miller
[includes.h monitor.c readpass.c scp.c serverloop.c session.c^?] [sftp.c sshconnect.c sshconnect2.c sshd.c] move #include <sys/wait.h> out of includes.h; ok markus@
2006-03-15 - stevesk@cvs.openbsd.org 2006/02/07 01:18:09Damien Miller
[includes.h ssh-agent.c ssh-keyscan.c sshconnect2.c] move #include <sys/queue.h> out of includes.h; ok markus@
2005-11-05 - stevesk@cvs.openbsd.org 2005/10/14 02:17:59Damien Miller
[ssh-keygen.c ssh.c sshconnect2.c] no trailing "\n" for log functions; ok djm@
2005-10-07* Only send GSSAPI proposal if GSSAPIAuthentication is enabled.Colin Watson
2005-10-06back out accidental commitColin Watson
2005-10-06* Build-depend on libselinux1-dev on armeb.Colin Watson
2005-09-15* Interoperate with ssh-krb5 << 3.8.1p1-1 servers, which used a slightlyColin Watson
different version of the gssapi authentication method (thanks, Aaron M. Ucko; closes: #328388).
2005-09-14* Add remaining pieces of Kerberos support (closes: #275472):Colin Watson
- Add GSSAPI key exchange support from http://www.sxw.org.uk/computing/patches/openssh.html (thanks, Stephen Frost).
2005-08-31 - (djm) OpenBSD CVS SyncDamien Miller
- djm@cvs.openbsd.org 2005/08/30 22:08:05 [gss-serv.c sshconnect2.c] destroy credentials if krb5_kuserok() call fails. Stops credentials being delegated to users who are not authorised for GSSAPIAuthentication when GSSAPIDeletegateCredentials=yes and another authentication mechanism succeeds; bz#1073 reported by paul.moore AT centrify.com, fix by simon AT sxw.org.uk, tested todd@ biorn@ jakob@; ok deraadt@
2005-07-26 - markus@cvs.openbsd.org 2005/07/25 11:59:40Damien Miller
[kex.c kex.h myproposal.h packet.c packet.h servconf.c session.c] [sshconnect2.c sshd.c sshd_config sshd_config.5] add a new compression method that delays compression until the user has been authenticated successfully and set compression to 'delayed' for sshd. this breaks older openssh clients (< 3.5) if they insist on compression, so you have to re-enable compression in sshd_config. ok djm@
2005-07-17 - djm@cvs.openbsd.org 2005/07/17 07:17:55Damien Miller
[auth-rh-rsa.c auth-rhosts.c auth2-chall.c auth2-gss.c channels.c] [cipher-ctr.c gss-genr.c gss-serv.c kex.c moduli.c readconf.c] [serverloop.c session.c sftp-client.c sftp.c ssh-add.c ssh-keygen.c] [sshconnect.c sshconnect2.c] knf says that a 2nd level indent is four (not three or five) spaces
2005-06-17 - djm@cvs.openbsd.org 2005/06/17 02:44:33Damien Miller
[auth-rsa.c auth.c auth1.c auth2-chall.c auth2-gss.c authfd.c authfile.c] [bufaux.c canohost.c channels.c cipher.c clientloop.c dns.c gss-serv.c] [kex.c kex.h key.c mac.c match.c misc.c packet.c packet.h scp.c] [servconf.c session.c session.h sftp-client.c sftp-server.c sftp.c] [ssh-keyscan.c ssh-rsa.c sshconnect.c sshconnect1.c sshconnect2.c sshd.c] make this -Wsign-compare clean; ok avsm@ markus@ NB. auth1.c changes not committed yet (conflicts with uncommitted sync) NB2. more work may be needed to make portable Wsign-compare clean
2004-06-15 - djm@cvs.openbsd.org 2004/06/13 12:53:24Damien Miller
[dh.c dh.h kex.c kex.h kexdhc.c kexdhs.c monitor.c myproposal.h] [ssh-keyscan.c sshconnect2.c sshd.c] implement diffie-hellman-group14-sha1 kex method (trivial extension to existing diffie-hellman-group1-sha1); ok markus@
2004-05-13 - djm@cvs.openbsd.org 2004/05/08 00:21:31Darren Tucker
[clientloop.c misc.h readpass.c scard.c ssh-add.c ssh-agent.c ssh-keygen.c sshconnect.c sshconnect1.c sshconnect2.c] removed: readpass.h kill a tiny header; ok deraadt@
2004-04-20 - (djm) OpenBSD CVS SyncDamien Miller
- henning@cvs.openbsd.org 2004/04/08 16:08:21 [sshconnect2.c] swap the last two parameters to TAILQ_FOREACH_REVERSE. matches what FreeBSD and NetBSD do. ok millert@ mcbride@ markus@ ho@, checked to not affect ports by naddy@
2004-03-08 - markus@cvs.openbsd.org 2004/03/05 10:53:58Damien Miller
[readconf.c readconf.h scp.1 sftp.1 ssh.1 ssh_config.5 sshconnect2.c] add IdentitiesOnly; ok djm@, pb@
2004-01-21 - markus@cvs.openbsd.org 2004/01/19 21:25:15Damien Miller
[auth2-hostbased.c auth2-pubkey.c serverloop.c ssh-keysign.c sshconnect2.c] fix mem leaks; some fixes from Pete Flugstad; tested dtucker@
2003-11-21more whitespace (tabs this time)Damien Miller