| Age | Commit message (Collapse) | Author |
|---|
|
[mac.c myproposal.h ssh.1 ssh_config.5 sshd.8 sshd_config.5]
Add new SHA256 and SHA512 based HMAC modes from
http://www.ietf.org/id/draft-dbider-sha2-mac-for-ssh-02.txt
Patch from mdb AT juniper.net; feedback and ok markus@
|
|
[sshd.8 sshd_config.5]
tweak previous; ok djm
|
|
- djm@cvs.openbsd.org 2011/05/23 03:30:07
[auth-rsa.c auth.c auth.h auth2-pubkey.c monitor.c monitor_wrap.c pathnames.h servconf.c servconf.h sshd.8 sshd_config sshd_config.5]
allow AuthorizedKeysFile to specify multiple files, separated by spaces.
Bring back authorized_keys2 as a default search path (to avoid breaking
existing users of this file), but override this in sshd_config so it will
be no longer used on fresh installs. Maybe in 2015 we can remove it
entierly :)
feedback and ok markus@ dtucker@
|
|
[scp.1 ssh-add.1 ssh-keygen.1 ssh.1 ssh_config.5 sshd.8 sshd_config.5]
knock out some "-*- nroff -*-" lines;
|
|
[PROTOCOL PROTOCOL.agent PROTOCOL.certkeys auth2-jpake.c authfd.c]
[authfile.c buffer.h dns.c kex.c kex.h key.c key.h monitor.c]
[monitor_wrap.c myproposal.h packet.c packet.h pathnames.h readconf.c]
[ssh-add.1 ssh-add.c ssh-agent.1 ssh-agent.c ssh-keygen.1 ssh-keygen.c]
[ssh-keyscan.1 ssh-keyscan.c ssh-keysign.8 ssh.1 ssh.c ssh2.h]
[ssh_config.5 sshconnect.c sshconnect2.c sshd.8 sshd.c sshd_config.5]
[uuencode.c uuencode.h bufec.c kexecdh.c kexecdhc.c kexecdhs.c ssh-ecdsa.c]
Implement Elliptic Curve Cryptography modes for key exchange (ECDH) and
host/user keys (ECDSA) as specified by RFC5656. ECDH and ECDSA offer
better performance than plain DH and DSA at the same equivalent symmetric
key length, as well as much shorter keys.
Only the mandatory sections of RFC5656 are implemented, specifically the
three REQUIRED curves nistp256, nistp384 and nistp521 and only ECDH and
ECDSA. Point compression (optional in RFC5656 is NOT implemented).
Certificate host and user keys using the new ECDSA key types are supported.
Note that this code has not been tested for interoperability and may be
subject to change.
feedback and ok markus@
|
|
[ssh-keysign.8 ssh.1 sshd.8]
use the same template for all FILES sections; i.e. -compact/.Pp where we
have multiple items, and .Pa for path names;
|
|
[ssh.1 ssh_config.5 sshd.8]
Remove mentions of weird "addr/port" alternate address format for IPv6
addresses combinations. It hasn't worked for ages and we have supported
the more commen "[addr]:port" format for a long time. ok jmc@ markus@
|
|
[auth-options.c auth-options.h auth.c auth.h auth2-pubkey.c]
[key.c servconf.c servconf.h sshd.8 sshd_config.5]
add some optional indirection to matching of principal names listed
in certificates. Currently, a certificate must include the a user's name
to be accepted for authentication. This change adds the ability to
specify a list of certificate principal names that are acceptable.
When authenticating using a CA trusted through ~/.ssh/authorized_keys,
this adds a new principals="name1[,name2,...]" key option.
For CAs listed through sshd_config's TrustedCAKeys option, a new config
option "AuthorizedPrincipalsFile" specifies a per-user file containing
the list of acceptable names.
If either option is absent, the current behaviour of requiring the
username to appear in principals continues to apply.
These options are useful for role accounts, disjoint account namespaces
and "user@realm"-style naming policies in certificates.
feedback and ok markus@
|
|
[ssh.1 sshd.8]
tweak previous;
|
|
[ssh.1 sshd.8]
move section on CA and revoked keys from ssh.1 to sshd.8's known hosts
format section and rework it a bit; requested by jmc@
|
|
[sshd.8]
the authorized_keys option for CA keys is "cert-authority", not
"from=cert-authority". spotted by imorgan AT nas.nasa.gov
|
|
[ssh-keygen.1 ssh.1 sshd.8]
tweak previous;
|
|
- djm@cvs.openbsd.org 2010/02/26 20:29:54
[PROTOCOL PROTOCOL.agent PROTOCOL.certkeys addrmatch.c auth-options.c]
[auth-options.h auth.h auth2-pubkey.c authfd.c dns.c dns.h hostfile.c]
[hostfile.h kex.h kexdhs.c kexgexs.c key.c key.h match.h monitor.c]
[myproposal.h servconf.c servconf.h ssh-add.c ssh-agent.c ssh-dss.c]
[ssh-keygen.1 ssh-keygen.c ssh-rsa.c ssh.1 ssh.c ssh2.h sshconnect.c]
[sshconnect2.c sshd.8 sshd.c sshd_config.5]
Add support for certificate key types for users and hosts.
OpenSSH certificate key types are not X.509 certificates, but a much
simpler format that encodes a public key, identity information and
some validity constraints and signs it with a CA key. CA keys are
regular SSH keys. This certificate style avoids the attack surface
of X.509 certificates and is very easy to deploy.
Certified host keys allow automatic acceptance of new host keys
when a CA certificate is marked as sh/known_hosts.
see VERIFYING HOST KEYS in ssh(1) for details.
Certified user keys allow authentication of users when the signing
CA key is marked as trusted in authorized_keys. See "AUTHORIZED_KEYS
FILE FORMAT" in sshd(8) for details.
Certificates are minted using ssh-keygen(1), documentation is in
the "CERTIFICATES" section of that manpage.
Documentation on the format of certificates is in the file
PROTOCOL.certkeys
feedback and ok markus@
|
|
[sshd.8]
debug output goes to stderr, not "the system log"; ok markus dtucker
|
|
[sshd_config.5 ssh_config.5 sshd.8 ssh.1]
some tweaks now that protocol 1 is not offered by default; ok markus
|
|
[sftp-server.8 sshd.8 ssh-agent.1]
fix a few typographical errors found by spell(1).
ok dtucker@, jmc@
|
|
[sshd.8]
do not give an example of how to chmod files: we can presume the user
knows that. removes an ambiguity in the permission of authorized_keys;
ok deraadt
|
|
[sshd_config sshd_config.5 sshd.8 servconf.c]
increase default size of ssh protocol 1 ephemeral key from 768 to 1024
bits; prodded by & ok dtucker@ ok deraadt@
|
|
[sshd.8]
kill trailing whitespace;
|
|
[auth-options.c match.c servconf.c addrmatch.c sshd.8]
support CIDR address matching in .ssh/authorized_keys from="..." stanzas
ok and extensive testing dtucker@
|
|
[sshd.8 sshd.c]
- update usage()
- fix SYNOPSIS, and sort options
- some minor additional fixes
|
|
[sshd.c channels.h channels.c log.c servconf.c log.h servconf.h sshd.8]
Add extended test mode (-T) and connection parameters for test mode (-C).
-T causes sshd to write its effective configuration to stdout and exit.
-C causes any relevant Match rules to be applied before output. The
combination allows tesing of the parser and config files. ok deraadt djm
|
|
[sshd.8]
remove trailing whitespace;
|
|
[auth-options.c auth-options.h session.c sshd.8]
add no-user-rc authorized_keys option to disable execution of ~/.ssh/rc
|
|
[ssh.1 sshd.8 sshd_config.5]
bump Mdocdate for pages committed in "febuary", necessary because
of a typo in rcs.c;
|
|
[ssh.1 sshd.8]
Document the correct permissions for the ~/.ssh/ directory.
ok jmc
|
|
accounts and that's what the code looks for, so make man page and code
agree. Pointed out by Roumen Petrov.
|
|
[kex.h mac.c mac.h monitor_wrap.c myproposal.h packet.c ssh.1]
[ssh_config.5 sshd.8 sshd_config.5]
Add a new MAC algorithm for data integrity, UMAC-64 (not default yet,
must specify umac-64@openssh.com). Provides about 20% end-to-end speedup
compared to hmac-md5. Represents a different approach to message
authentication to that of HMAC that may be beneficial if HMAC based on
one of its underlying hash algorithms is found to be vulnerable to a
new attack. http://www.ietf.org/rfc/rfc4418.txt
in conjunction with and OK djm@
|
|
[scp.1 ssh_config.5 sftp-server.8 ssh-agent.1 sshd_config.5 sftp.1
ssh-keygen.1 ssh-keyscan.1 ssh-add.1 sshd.8 ssh.1 ssh-keysign.8]
convert to new .Dd format;
(We will need to teach mdoc2man.awk to understand this too.)
|
|
[sshd.8]
- let synopsis and description agree for -f
- sort FILES
- +.Xr ssh-keyscan 1 ,
from Igor Sobrado
|
|
[sshd.8]
Add more detail about what permissions are and aren't accepted for
authorized_keys files. Corrections jmc@, ok djm@, "looks good" jmc@
|
|
[servconf.c servconf.h session.c sshd.8 sshd_config sshd_config.5]
Add ForceCommand keyword to sshd_config, equivalent to the "command="
key option, man page entry and example in sshd_config.
Feedback & ok djm@, man page corrections & ok jmc@
|
|
[sshd.8]
s/and and/and/
|
|
[misc.c misc.h sshd.8 sshconnect.c]
Add port identifier to known_hosts for non-default ports, based originally
on a patch from Devin Nate in bz#910.
For any connection using the default port or using a HostKeyAlias the
format is unchanged, otherwise the host name or address is enclosed
within square brackets in the same format as sshd's ListenAddress.
Tested by many, ok markus@.
|
|
[ssh.1 ssh_config.5 sshd.8 sshd_config.5]
more consistency fixes;
|
|
[sshd.8]
signpost to PATTERNS section;
|
|
[sshd.8]
grammar;
|
|
[sshd.8]
sync the (s)hosts.equiv FILES entries w/ those from ssh.1;
|
|
[sshd.8]
move the sshrc stuff out of FILES, and into its own section:
FILES is not a good place to document how stuff works;
|
|
[sshd.8]
sync some of the FILES entries w/ ssh.1;
|
|
[sshd.8]
remove ietf draft references; RFC list now maintained in ssh.1;
|
|
[sshd.8]
sort FILES and use a -compact list;
|
|
[sshd.8]
- avoid nasty line split
- `*' does not need to be escaped
|
|
[sshd.8]
turn this into an example ssh_known_hosts file; ok djm
|
|
[sshd.8]
small tweaks for the ssh_known_hosts section;
|
|
[sshd.8]
no need to subsection the authorized_keys examples - instead, convert
this to look like an actual file. also use proto 2 keys, and use IETF
example addresses;
|
|
[sshd.8]
sort the list of options permissable w/ authorized_keys;
ok djm dtucker
|
|
[sshd.8]
rework the description of authorized_keys a little;
|
|
[sshd.8]
- move some text into a CAVEATS section
- merge the COMMAND EXECUTION... section into AUTHENTICATION
|
|
[sshd.8]
small tweak;
|
