| Age | Commit message (Collapse) | Author |
|---|
|
[channels.c ssh.1 servconf.c sshd_config.5 sshd.c channels.h servconf.h
ssh-keyscan.1 ssh-keyscan.c readconf.c sshconnect.c misc.c ssh.c
readconf.h scp.1 sftp.1 ssh_config.5 misc.h]
Remove RoutingDomain from ssh since it's now not needed. It can be
replaced with "route exec" or "nc -V" as a proxycommand. "route exec"
also ensures that trafic such as DNS lookups stays withing the specified
routingdomain. For example (from reyk):
# route -T 2 exec /usr/sbin/sshd
or inherited from the parent process
$ route -T 2 exec sh
$ ssh 10.1.2.3
ok deraadt@ markus@ stevesk@ reyk@
|
|
[sshd.c]
Afer sshd receives a SIGHUP, ignore subsequent HUPs while sshd re-execs
itself. Prevents two HUPs in quick succession from resulting in sshd
dying. bz#1692, patch from Colin Watson via Ubuntu.
|
|
[ssh_config.5 sshd.c misc.h ssh-keyscan.1 readconf.h sshconnect.c
channels.c channels.h servconf.h servconf.c ssh.1 ssh-keyscan.c scp.1
sftp.1 sshd_config.5 readconf.c ssh.c misc.c]
Allow to set the rdomain in ssh/sftp/scp/sshd and ssh-keyscan.
ok markus@
|
|
based on a patch from Vaclav Ovsik and Colin Watson. ok djm.
|
|
set IPV6_V6ONLY for local forwarding with GatwayPorts=yes. Unify
setting IPV6_V6ONLY behind a new function misc.c:sock_set_v6only()
report and fix from jan.kratochvil AT redhat.com
|
|
|
|
[sshd.c packet.c serverloop.c monitor_wrap.c clientloop.c sshconnect.c
monitor.c Added roaming.h roaming_common.c roaming_dummy.c]
Keep track of number of bytes read and written. Needed for upcoming
changes. Most code from Martin Forssen, maf at appgate dot com.
ok markus@
Also, applied appropriate changes to Makefile.in
|
|
[clientloop.c misc.c readconf.c readconf.h servconf.c servconf.h]
[serverloop.c ssh-keyscan.c ssh.c sshd.c]
make a2port() return -1 when it encounters an invalid port number
rather than 0, which it will now treat as valid (needed for future work)
adjust current consumers of a2port() to check its return value is <= 0,
which in turn required some things to be converted from u_short => int
make use of int vs. u_short consistent in some other places too
feedback & ok markus@
|
|
[clientloop.c sshd.c]
don't need to #include "monitor_fdpass.h"
|
|
[clientloop.c monitor.c monitor_wrap.c packet.c packet.h sshd.c]
sync v1 and v2 traffic accounting; add it to sshd, too;
ok djm@, dtucker@
|
|
[packet.c scp.c serverloop.c sftp-client.c ssh-agent.c ssh-keyscan.c]
[sshd.c] Explicitly handle EWOULDBLOCK wherever we handle EAGAIN, on
some platforms (HP nonstop) it is a distinct errno;
bz#1467 reported by sconeu AT yahoo.com; ok dtucker@
|
|
[sshconnect.c sshd.c]
Send CR LF during protocol banner exchanges, but only for Protocol 2 only,
in order to comply with RFC 4253. bz #1443, ok djm@
|
|
[sshd.c]
ensure default umask disallows at least group and world write; ok djm@
|
|
- dtucker@cvs.openbsd.org 2008/06/14 15:49:48
[sshd.c]
wrap long line at 80 chars
|
|
[sshd.c sshconnect.c packet.h misc.c misc.h packet.c]
Make keepalive timeouts apply while waiting for a packet, particularly
during key renegotiation (bz #1363). With djm and Matt Day, ok djm@
|
|
[sshd.8 sshd.c]
- update usage()
- fix SYNOPSIS, and sort options
- some minor additional fixes
|
|
[sshd.c channels.h channels.c log.c servconf.c log.h servconf.h sshd.8]
Add extended test mode (-T) and connection parameters for test mode (-C).
-T causes sshd to write its effective configuration to stdout and exit.
-C causes any relevant Match rules to be applied before output. The
combination allows tesing of the parser and config files. ok deraadt djm
|
|
[auth-options.c auth1.c channels.c channels.h clientloop.c gss-serv.c]
[monitor.c monitor_wrap.c nchan.c servconf.c serverloop.c session.c]
[ssh.c sshd.c]
Implement a channel success/failure status confirmation callback
mechanism. Each channel maintains a queue of callbacks, which will
be drained in order (RFC4253 guarantees confirm messages are not
reordered within an channel).
Also includes a abandonment callback to clean up if a channel is
closed without sending confirmation messages. This probably
shouldn't happen in compliant implementations, but it could be
abused to leak memory.
ok markus@ (as part of a larger diff)
|
|
- djm@cvs.openbsd.org 2008/04/13 00:22:17
[dh.c sshd.c]
Use arc4random_buf() when requesting more than a single word of output
Use arc4random_uniform() when the desired random number upper bound
is not a power of two
ok deraadt@ millert@
|
|
pam_open_session and pam_close_session into the privsep monitor, which
will ensure that pam_session_close is called as root. Patch from Tomas
Mraz.
|
|
[sshd.c]
When started in configuration test mode (-t) do not check that sshd is
being started with an absolute path.
ok djm
|
|
[servconf.h session.c sshd.c]
rekey arc4random and OpenSSL RNG in postauth child
closefrom fds > 2 before shell/command execution
ok markus@
|
|
same SyslogFacility as the rest of sshd. Patch from William Knox,
ok djm@.
|
|
openbsd-compat/openssl-compat.{c,h}] Bug #1437 Move the OpenSSL compat
header to after OpenSSL headers, since some versions of OpenSSL have
SSLeay_add_all_algorithms as a macro already.
|
|
tsr2600 AT gmail.com
|
|
[sshd.c]
When in inetd mode, have sshd generate a Protocol 1 ephemeral server
key only for connections where the client chooses Protocol 1 as opposed
to when it's enabled in the server's config. Speeds up Protocol 2
connections to inetd-mode servers that also allow Protocol 1. bz #440,
based on a patch from bruno at wolff.to, ok markus@
|
|
[servconf.c canohost.c misc.c channels.c sshconnect.c misc.h ssh-keyscan.c
sshd.c]
Add a small helper function to consistently handle the EAI_SYSTEM error
code of getaddrinfo. Prompted by vgiffin at apple com via bz #1417.
ok markus@ stevesk@
|
|
[sshd.c]
zap double include; from p_nowaczyk AT o2.pl
(not required in -portable, Id sync only)
|
|
[servconf.c sshd.c]
Move C/R -> kbdint special case to after the defaults have been
loaded, which makes ChallengeResponse default to yes again. This
was broken by the Match changes and not fixed properly subsequently.
Found by okan at demirmen.com, ok djm@ "please do it" deraadt@
|
|
[sshd.c]
Clear alarm() before restarting sshd on SIGHUP. Without this, if there's
a SIGALRM pending (for SSH1 key regeneration) when sshd is SIGHUP'ed, the
newly exec'ed sshd will get the SIGALRM and not have a handler for it,
and the default action will terminate the listening sshd. Analysis and
patch from andrew at gaul.org.
|
|
[auth-rsa.c kexgexc.c kexdhs.c key.c ssh-dss.c sshd.c kexgexs.c
ssh-keygen.c bufbn.c moduli.c scard.c kexdhc.c sshconnect1.c dh.c rsa.c]
add missing checks for openssl return codes; with & ok djm@
|
|
if we absolutely need it. Pointed out by Corinna, ok djm@
|
|
on older versions of OS X. ok djm@
|
|
|
|
be used to drop privilege to; fixes Solaris GSSAPI crash reported by
Magnus Abrante; suggestion and feedback dtucker@
NB. this change will require that the privilege separation user must
exist on all the time, not just when UsePrivilegeSeparation=yes
|
|
[auth-rsa.c auth-shadow.c auth-sia.c auth1.c auth2-chall.c]
[auth2-gss.c auth2-kbdint.c auth2-none.c authfd.c authfile.c]
[cipher-3des1.c cipher-aes.c cipher-bf1.c cipher-ctr.c clientloop.c]
[dh.c dns.c entropy.c gss-serv-krb5.c gss-serv.c hostfile.c kex.c]
[kexdhc.c kexdhs.c kexgexc.c kexgexs.c key.c loginrec.c mac.c]
[md5crypt.c monitor.c monitor_wrap.c readconf.c rsa.c]
[scard-opensc.c scard.c session.c ssh-add.c ssh-agent.c ssh-dss.c]
[ssh-keygen.c ssh-keysign.c ssh-rsa.c ssh.c sshconnect.c]
[sshconnect1.c sshconnect2.c sshd.c rc4.diff]
[openbsd-compat/bsd-cray.c openbsd-compat/port-aix.c]
[openbsd-compat/port-linux.c openbsd-compat/port-solaris.c]
[openbsd-compat/port-uw.c]
Lots of headers for SCO OSR6, mainly adding stdarg.h for log.h;
compile problems reported by rac AT tenzing.org
|
|
[platform.c platform.h sshd.c openbsd-compat/Makefile.in]
[openbsd-compat/openbsd-compat.h openbsd-compat/port-solaris.c]
[openbsd-compat/port-solaris.h] Add support for Solaris process
contracts, enabled with --use-solaris-contracts. Patch from Chad
Mynhier, tweaked by dtucker@ and myself; ok dtucker@
|
|
[auth.h session.c sshd.c]
delay authentication related cleanups until we're authenticated and
all alarms have been cancelled; ok deraadt
|
|
[log.c log.h sshd.c]
make signal handler termination path shorter; risky code pointed out by
mark dowd; ok djm markus
|
|
[sshd.c]
factor inetd connection, TCP listen and main TCP accept loop out of
main() into separate functions to improve readability; ok markus@
|
|
[auth2-none.c sshd.c monitor_wrap.c]
Add headers required to build with KERBEROS5=no. ok djm@
|
|
[openbsd-compat/port-tun.c openbsd-compat/port-tun.h] Sprinkle more
includes for Linux in
|
|
[OVERVIEW atomicio.c atomicio.h auth-bsdauth.c auth-chall.c auth-krb5.c]
[auth-options.c auth-options.h auth-passwd.c auth-rh-rsa.c auth-rhosts.c]
[auth-rsa.c auth-skey.c auth.c auth.h auth1.c auth2-chall.c auth2-gss.c]
[auth2-hostbased.c auth2-kbdint.c auth2-none.c auth2-passwd.c ]
[auth2-pubkey.c auth2.c authfd.c authfd.h authfile.c bufaux.c bufbn.c]
[buffer.c buffer.h canohost.c channels.c channels.h cipher-3des1.c]
[cipher-bf1.c cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c]
[compress.c deattack.c dh.c dispatch.c dns.c dns.h fatal.c groupaccess.c]
[groupaccess.h gss-genr.c gss-serv-krb5.c gss-serv.c hostfile.c kex.c]
[kex.h kexdh.c kexdhc.c kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c]
[key.h log.c log.h mac.c match.c md-sha256.c misc.c misc.h moduli.c]
[monitor.c monitor_fdpass.c monitor_mm.c monitor_mm.h monitor_wrap.c]
[monitor_wrap.h msg.c nchan.c packet.c progressmeter.c readconf.c]
[readconf.h readpass.c rsa.c scard.c scard.h scp.c servconf.c servconf.h]
[serverloop.c session.c session.h sftp-client.c sftp-common.c]
[sftp-common.h sftp-glob.c sftp-server.c sftp.c ssh-add.c ssh-agent.c]
[ssh-dss.c ssh-gss.h ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh-rsa.c]
[ssh.c ssh.h sshconnect.c sshconnect.h sshconnect1.c sshconnect2.c]
[sshd.c sshlogin.c sshlogin.h sshpty.c sshpty.h sshtty.c ttymodes.c]
[uidswap.c uidswap.h uuencode.c uuencode.h xmalloc.c xmalloc.h]
[loginrec.c loginrec.h openbsd-compat/port-aix.c openbsd-compat/port-tun.h]
almost entirely get rid of the culture of ".h files that include .h files"
ok djm, sort of ok stevesk
makes the pain stop in one easy step
NB. portable commit contains everything *except* removing includes.h, as
that will take a fair bit more work as we move headers that are required
for portability workarounds to defines.h. (also, this step wasn't "easy")
|
|
[auth-passwd.c auth-rhosts.c auth-rsa.c auth.c auth.h auth1.c]
[auth2-chall.c auth2-pubkey.c authfile.c buffer.c canohost.c]
[channels.c clientloop.c dh.c dns.c dns.h hostfile.c kex.c kexdhc.c]
[kexgexc.c kexgexs.c key.c key.h log.c misc.c misc.h moduli.c]
[monitor_wrap.c packet.c progressmeter.c readconf.c readpass.c scp.c]
[servconf.c session.c sftp-client.c sftp-common.c sftp-server.c sftp.c]
[ssh-add.c ssh-agent.c ssh-keygen.c ssh-keyscan.c ssh.c sshconnect.c]
[sshconnect1.c sshconnect2.c sshd.c sshlogin.c sshtty.c uuencode.c]
[uuencode.h xmalloc.c]
move #include <stdio.h> out of includes.h
|
|
[authfd.c authfile.c dh.c canohost.c channels.c clientloop.c compat.c]
[hostfile.c kex.c log.c misc.c moduli.c monitor.c packet.c readpass.c]
[scp.c servconf.c session.c sftp-server.c sftp.c ssh-add.c ssh-agent.c]
[ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh.c sshconnect.c]
[sshconnect1.c sshd.c xmalloc.c]
move #include <stdlib.h> out of includes.h
|
|
[channels.c clientloop.c packet.c scp.c serverloop.c sftp-client.c]
[sftp-server.c ssh-agent.c ssh-keyscan.c sshconnect.c sshd.c]
move #include <sys/time.h> out of includes.h
|
|
[canohost.c channels.c cipher-acss.c defines.h dns.c gss-genr.c]
[gss-serv-krb5.c gss-serv.c log.h loginrec.c logintest.c readconf.c]
[servconf.c ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh-rand-helper.c]
[ssh.c sshconnect.c sshd.c openbsd-compat/bindresvport.c]
[openbsd-compat/bsd-arc4random.c openbsd-compat/bsd-misc.c]
[openbsd-compat/getrrsetbyname.c openbsd-compat/glob.c]
[openbsd-compat/mktemp.c openbsd-compat/port-linux.c]
[openbsd-compat/port-tun.c openbsd-compat/readpassphrase.c]
[openbsd-compat/setproctitle.c openbsd-compat/xmmap.c]
make the portable tree compile again - sprinkle unistd.h and string.h
back in. Don't redefine __unused, as it turned out to be used in
headers on Linux, and replace its use in auth-pam.c with ARGSUSED
|
|
[atomicio.c auth-options.c auth-passwd.c auth-rhosts.c auth-rsa.c]
[auth.c auth1.c auth2-chall.c auth2-hostbased.c auth2-passwd.c auth2.c]
[authfd.c authfile.c bufaux.c bufbn.c buffer.c canohost.c channels.c]
[cipher-3des1.c cipher-bf1.c cipher-ctr.c cipher.c clientloop.c]
[compat.c deattack.c dh.c dns.c gss-genr.c gss-serv.c hostfile.c]
[includes.h kex.c kexdhc.c kexdhs.c kexgexc.c kexgexs.c key.c log.c]
[mac.c match.c md-sha256.c misc.c moduli.c monitor.c monitor_fdpass.c]
[monitor_mm.c monitor_wrap.c msg.c nchan.c packet.c rsa.c]
[progressmeter.c readconf.c readpass.c scp.c servconf.c serverloop.c]
[session.c sftp-client.c sftp-common.c sftp-glob.c sftp-server.c sftp.c]
[ssh-add.c ssh-agent.c ssh-dss.c ssh-keygen.c ssh-keyscan.c]
[ssh-keysign.c ssh-rsa.c ssh.c sshconnect.c sshconnect1.c sshconnect2.c]
[sshd.c sshlogin.c sshpty.c ttymodes.c uidswap.c xmalloc.c]
move #include <string.h> out of includes.h
|
|
[auth-options.c canohost.c channels.c includes.h readconf.c servconf.c ssh-keyscan.c ssh.c sshconnect.c sshd.c]
move #include <netdb.h> out of includes.h; ok djm@
|
|
[sshd.c servconf.h servconf.c sshd_config.5 auth.c]
Add support for conditional directives to sshd_config via a "Match"
keyword, which works similarly to the "Host" directive in ssh_config.
Lines after a Match line override the default set in the main section
if the condition on the Match line is true, eg
AllowTcpForwarding yes
Match User anoncvs
AllowTcpForwarding no
will allow port forwarding by all users except "anoncvs".
Currently only a very small subset of directives are supported.
ok djm@
|
