summaryrefslogtreecommitdiff
path: root/sshd.c
AgeCommit message (Collapse)Author
2008-07-22* New upstream release (closes: #474301). Important changes not previouslyColin Watson
backported to 4.7p1: - 4.9/4.9p1 (http://www.openssh.com/txt/release-4.9): + Added chroot(2) support for sshd(8), controlled by a new option "ChrootDirectory" (closes: #139047, LP: #24777). + Linked sftp-server(8) into sshd(8). The internal sftp server is used when the command "internal-sftp" is specified in a Subsystem or ForceCommand declaration. When used with ChrootDirectory, the internal sftp server requires no special configuration of files inside the chroot environment. + Added a protocol extension method "posix-rename@openssh.com" for sftp-server(8) to perform POSIX atomic rename() operations; sftp(1) prefers this if available (closes: #308561). + Removed the fixed limit of 100 file handles in sftp-server(8). + ssh(8) will now skip generation of SSH protocol 1 ephemeral server keys when in inetd mode and protocol 2 connections are negotiated. This speeds up protocol 2 connections to inetd-mode servers that also allow Protocol 1. + Accept the PermitRootLogin directive in a sshd_config(5) Match block. Allows for, e.g. permitting root only from the local network. + Reworked sftp(1) argument splitting and escaping to be more internally consistent (i.e. between sftp commands) and more consistent with sh(1). Please note that this will change the interpretation of some quoted strings, especially those with embedded backslash escape sequences. + Support "Banner=none" in sshd_config(5) to disable sending of a pre-login banner (e.g. in a Match block). + ssh(1) ProxyCommands are now executed with $SHELL rather than /bin/sh. + ssh(1)'s ConnectTimeout option is now applied to both the TCP connection and the SSH banner exchange (previously it just covered the TCP connection). This allows callers of ssh(1) to better detect and deal with stuck servers that accept a TCP connection but don't progress the protocol, and also makes ConnectTimeout useful for connections via a ProxyCommand. + scp(1) incorrectly reported "stalled" on slow copies (closes: #140828). + scp(1) date underflow for timestamps before epoch. + ssh(1) used the obsolete SIG DNS RRtype for host keys in DNS, instead of the current standard RRSIG. + Correctly drain ACKs when a sftp(1) upload write fails midway, avoids a fatal() exit from what should be a recoverable condition. + Fixed ssh-keygen(1) selective host key hashing (i.e. "ssh-keygen -HF hostname") to not include any IP address in the data to be hashed. + Make ssh(1) skip listening on the IPv6 wildcard address when a binding address of 0.0.0.0 is used against an old SSH server that does not support the RFC4254 syntax for wildcard bind addresses. + Enable IPV6_V6ONLY socket option on sshd(8) listen socket, as is already done for X11/TCP forwarding sockets (closes: #439661). + Fix FD leak that could hang a ssh(1) connection multiplexing master. + Make ssh(1) -q option documentation consistent with reality. + Fixed sshd(8) PAM support not calling pam_session_close(), or failing to call it with root privileges (closes: #372680). + Fix activation of OpenSSL engine support when requested in configure (LP: #119295). - 5.1/5.1p1 (http://www.openssh.com/txt/release-5.1): + Introduce experimental SSH Fingerprint ASCII Visualisation to ssh(1) and ssh-keygen(1). Visual fingerprint display is controlled by a new ssh_config(5) option "VisualHostKey". The intent is to render SSH host keys in a visual form that is amenable to easy recall and rejection of changed host keys. + sshd_config(5) now supports CIDR address/masklen matching in "Match address" blocks, with a fallback to classic wildcard matching. + sshd(8) now supports CIDR matching in ~/.ssh/authorized_keys from="..." restrictions, also with a fallback to classic wildcard matching. + Added an extended test mode (-T) to sshd(8) to request that it write its effective configuration to stdout and exit. Extended test mode also supports the specification of connection parameters (username, source address and hostname) to test the application of sshd_config(5) Match rules. + ssh(1) now prints the number of bytes transferred and the overall connection throughput for SSH protocol 2 sessions when in verbose mode (previously these statistics were displayed for protocol 1 connections only). + sftp-server(8) now supports extension methods statvfs@openssh.com and fstatvfs@openssh.com that implement statvfs(2)-like operations. + sftp(1) now has a "df" command to the sftp client that uses the statvfs@openssh.com to produce a df(1)-like display of filesystem space and inode utilisation (requires statvfs@openssh.com support on the server). + Added a MaxSessions option to sshd_config(5) to allow control of the number of multiplexed sessions supported over a single TCP connection. This allows increasing the number of allowed sessions above the previous default of 10, disabling connection multiplexing (MaxSessions=1) or disallowing login/shell/subsystem sessions entirely (MaxSessions=0). + Added a no-more-sessions@openssh.com global request extension that is sent from ssh(1) to sshd(8) when the client knows that it will never request another session (i.e. when session multiplexing is disabled). This allows a server to disallow further session requests and terminate the session in cases where the client has been hijacked. + ssh-keygen(1) now supports the use of the -l option in combination with -F to search for a host in ~/.ssh/known_hosts and display its fingerprint. + ssh-keyscan(1) now defaults to "rsa" (protocol 2) keys, instead of "rsa1". + Added an AllowAgentForwarding option to sshd_config(8) to control whether authentication agent forwarding is permitted. Note that this is a loose control, as a client may install their own unofficial forwarder. + ssh(1) and sshd(8): avoid unnecessary malloc/copy/free when receiving network data, resulting in a ~10% speedup. + ssh(1) and sshd(8) will now try additional addresses when connecting to a port forward destination whose DNS name resolves to more than one address. The previous behaviour was to try the only first address and give up if that failed. + ssh(1) and sshd(8) now support signalling that channels are half-closed for writing, through a channel protocol extension notification "eow@openssh.com". This allows propagation of closed file descriptors, so that commands such as "ssh -2 localhost od /bin/ls | true" do not send unnecessary data over the wire. + sshd(8): increased the default size of ssh protocol 1 ephemeral keys from 768 to 1024 bits. + When ssh(1) has been requested to fork after authentication ("ssh -f") with ExitOnForwardFailure enabled, delay the fork until after replies for any -R forwards have been seen. Allows for robust detection of -R forward failure when using -f. + "Match group" blocks in sshd_config(5) now support negation of groups. E.g. "Match group staff,!guests". + sftp(1) and sftp-server(8) now allow chmod-like operations to set set[ug]id/sticky bits. + The MaxAuthTries option is now permitted in sshd_config(5) match blocks. + Multiplexed ssh(1) sessions now support a subset of the ~ escapes that are available to a primary connection. + ssh(1) connection multiplexing will now fall back to creating a new connection in most error cases (closes: #352830). + Make ssh(1) deal more gracefully with channel requests that fail. Previously it would optimistically assume that requests would always succeed, which could cause hangs if they did not (e.g. when the server runs out of file descriptors). + ssh(1) now reports multiplexing errors via the multiplex slave's stderr where possible (subject to LogLevel in the mux master). + Prevent sshd(8) from erroneously applying public key restrictions leaned from ~/.ssh/authorized_keys to other authentication methods when public key authentication subsequently fails (LP: #161047). + Fixed an UMAC alignment problem that manifested on Itanium platforms.
2008-07-11 - markus@cvs.openbsd.org 2008/07/10 18:08:11Damien Miller
[clientloop.c monitor.c monitor_wrap.c packet.c packet.h sshd.c] sync v1 and v2 traffic accounting; add it to sshd, too; ok djm@, dtucker@
2008-07-04 - (djm) [atomicio.c channels.c clientloop.c defines.h includes.h]Damien Miller
[packet.c scp.c serverloop.c sftp-client.c ssh-agent.c ssh-keyscan.c] [sshd.c] Explicitly handle EWOULDBLOCK wherever we handle EAGAIN, on some platforms (HP nonstop) it is a distinct errno; bz#1467 reported by sconeu AT yahoo.com; ok dtucker@
2008-07-02 - dtucker@cvs.openbsd.org 2008/07/01 07:24:22Darren Tucker
[sshconnect.c sshd.c] Send CR LF during protocol banner exchanges, but only for Protocol 2 only, in order to comply with RFC 4253. bz #1443, ok djm@
2008-06-21Clarify documentation of SSHD_OOM_ADJUST, and make setting it to theColin Watson
empty string actually skip adjustment as intended (closes: #487325).
2008-06-16 - dtucker@cvs.openbsd.org 2008/06/14 17:07:11Damien Miller
[sshd.c] ensure default umask disallows at least group and world write; ok djm@
2008-06-16 - OpenBSD CVS SyncDamien Miller
- dtucker@cvs.openbsd.org 2008/06/14 15:49:48 [sshd.c] wrap long line at 80 chars
2008-06-13 - dtucker@cvs.openbsd.org 2008/06/12 20:38:28Darren Tucker
[sshd.c sshconnect.c packet.h misc.c misc.h packet.c] Make keepalive timeouts apply while waiting for a packet, particularly during key renegotiation (bz #1363). With djm and Matt Day, ok djm@
2008-06-10 - jmc@cvs.openbsd.org 2008/06/10 08:17:40Darren Tucker
[sshd.8 sshd.c] - update usage() - fix SYNOPSIS, and sort options - some minor additional fixes
2008-06-10 - dtucker@cvs.openbsd.org 2008/06/10 04:50:25Darren Tucker
[sshd.c channels.h channels.c log.c servconf.c log.h servconf.h sshd.8] Add extended test mode (-T) and connection parameters for test mode (-C). -T causes sshd to write its effective configuration to stdout and exit. -C causes any relevant Match rules to be applied before output. The combination allows tesing of the parser and config files. ok deraadt djm
2008-05-26Fix memory leak of blacklisted host keys (thanks, Dmitry V. Levin).Colin Watson
2008-05-26Refactor rejection of blacklisted user keys into a singleColin Watson
reject_blacklisted_key function in auth.c (thanks, Dmitry V. Levin).
2008-05-25update for new blacklisted_key interfaceColin Watson
2008-05-25Restore OOM killer adjustment for child processes (thanks, Vaclav Ovsik;Colin Watson
closes: #480020).
2008-05-19 - djm@cvs.openbsd.org 2008/05/08 12:02:23Damien Miller
[auth-options.c auth1.c channels.c channels.h clientloop.c gss-serv.c] [monitor.c monitor_wrap.c nchan.c servconf.c serverloop.c session.c] [ssh.c sshd.c] Implement a channel success/failure status confirmation callback mechanism. Each channel maintains a queue of callbacks, which will be drained in order (RFC4253 guarantees confirm messages are not reordered within an channel). Also includes a abandonment callback to clean up if a channel is closed without sending confirmation messages. This probably shouldn't happen in compliant implementations, but it could be abused to leak memory. ok markus@ (as part of a larger diff)
2008-05-19 - (djm) OpenBSD CVS SyncDamien Miller
- djm@cvs.openbsd.org 2008/04/13 00:22:17 [dh.c sshd.c] Use arc4random_buf() when requesting more than a single word of output Use arc4random_uniform() when the desired random number upper bound is not a power of two ok deraadt@ millert@
2008-05-12* Mitigate OpenSSL security vulnerability:Colin Watson
- Add key blacklisting support. Keys listed in /etc/ssh/blacklist.TYPE-LENGTH will be rejected for authentication by sshd, unless "PermitBlacklistedKeys yes" is set in /etc/ssh/sshd_config. - Add a new program, ssh-vulnkey, which can be used to check keys against these blacklists. - Depend on openssh-blacklist. - Force dependencies on libssl0.9.8 / libcrypto0.9.8-udeb to at least 0.9.8g-9. - Automatically regenerate known-compromised host keys, with a critical-priority debconf note. (I regret that there was no time to gather translations.)
2008-03-11 - (dtucker) [auth-pam.c monitor.c session.c sshd.c] Bug #926: MoveDarren Tucker
pam_open_session and pam_close_session into the privsep monitor, which will ensure that pam_session_close is called as root. Patch from Tomas Mraz.
2008-03-07 - mbalmer@cvs.openbsd.org 2008/02/14 13:10:31Damien Miller
[sshd.c] When started in configuration test mode (-t) do not check that sshd is being started with an absolute path. ok djm
2008-03-07 - djm@cvs.openbsd.org 2008/02/13 22:38:17Damien Miller
[servconf.h session.c sshd.c] rekey arc4random and OpenSSL RNG in postauth child closefrom fds > 2 before shell/command execution ok markus@
2008-02-28 - (dtucker) [sshd.c] Bug #1042: make log messages for tcpwrappers use theDarren Tucker
same SyslogFacility as the rest of sshd. Patch from William Knox, ok djm@.
2008-02-28 - (dtucker) [includes.h ssh-add.c ssh-agent.c ssh-keygen.c ssh.c sshd.cDarren Tucker
openbsd-compat/openssl-compat.{c,h}] Bug #1437 Move the OpenSSL compat header to after OpenSSL headers, since some versions of OpenSSL have SSLeay_add_all_algorithms as a macro already.
2008-01-20 - (djm) Only listen for IPv6 connections on AF_INET6 sockets; patch fromDamien Miller
tsr2600 AT gmail.com
2008-01-01 - dtucker@cvs.openbsd.org 2007/12/31 15:27:04Darren Tucker
[sshd.c] When in inetd mode, have sshd generate a Protocol 1 ephemeral server key only for connections where the client chooses Protocol 1 as opposed to when it's enabled in the server's config. Speeds up Protocol 2 connections to inetd-mode servers that also allow Protocol 1. bz #440, based on a patch from bruno at wolff.to, ok markus@
2007-12-29 - dtucker@cvs.openbsd.org 2007/12/27 14:22:08Darren Tucker
[servconf.c canohost.c misc.c channels.c sshconnect.c misc.h ssh-keyscan.c sshd.c] Add a small helper function to consistently handle the EAI_SYSTEM error code of getaddrinfo. Prompted by vgiffin at apple com via bz #1417. ok markus@ stevesk@
2007-12-24* New upstream release (closes: #453367).Colin Watson
- CVE-2007-4752: Prevent ssh(1) from using a trusted X11 cookie if creation of an untrusted cookie fails; found and fixed by Jan Pechanec (closes: #444738). - sshd(8) in new installations defaults to SSH Protocol 2 only. Existing installations are unchanged. - The SSH channel window size has been increased, and both ssh(1) sshd(8) now send window updates more aggressively. These improves performance on high-BDP (Bandwidth Delay Product) networks. - ssh(1) and sshd(8) now preserve MAC contexts between packets, which saves 2 hash calls per packet and results in 12-16% speedup for arcfour256/hmac-md5. - A new MAC algorithm has been added, UMAC-64 (RFC4418) as "umac-64@openssh.com". UMAC-64 has been measured to be approximately 20% faster than HMAC-MD5. - Failure to establish a ssh(1) TunnelForward is now treated as a fatal error when the ExitOnForwardFailure option is set. - ssh(1) returns a sensible exit status if the control master goes away without passing the full exit status. - When using a ProxyCommand in ssh(1), set the outgoing hostname with gethostname(2), allowing hostbased authentication to work. - Make scp(1) skip FIFOs rather than hanging (closes: #246774). - Encode non-printing characters in scp(1) filenames. These could cause copies to be aborted with a "protocol error". - Handle SIGINT in sshd(8) privilege separation child process to ensure that wtmp and lastlog records are correctly updated. - Report GSSAPI mechanism in errors, for libraries that support multiple mechanisms. - Improve documentation for ssh-add(1)'s -d option. - Rearrange and tidy GSSAPI code, removing server-only code being linked into the client. - Delay execution of ssh(1)'s LocalCommand until after all forwardings have been established. - In scp(1), do not truncate non-regular files. - Improve exit message from ControlMaster clients. - Prevent sftp-server(8) from reading until it runs out of buffer space, whereupon it would exit with a fatal error (closes: #365541). - pam_end() was not being called if authentication failed (closes: #405041). - Manual page datestamps updated (closes: #433181).
2007-06-19 - Move C/R -> kbdint special case to after the defaults have beenColin Watson
loaded, which makes ChallengeResponse default to yes again. This was broken by the Match changes and not fixed properly subsequently (closes: #428968).
2007-06-12* New upstream release (closes: #395507, #397961, #420035). ImportantColin Watson
changes not previously backported to 4.3p2: - 4.4/4.4p1 (http://www.openssh.org/txt/release-4.4): + On portable OpenSSH, fix a GSSAPI authentication abort that could be used to determine the validity of usernames on some platforms. + Implemented conditional configuration in sshd_config(5) using the "Match" directive. This allows some configuration options to be selectively overridden if specific criteria (based on user, group, hostname and/or address) are met. So far a useful subset of post-authentication options are supported and more are expected to be added in future releases. + Add support for Diffie-Hellman group exchange key agreement with a final hash of SHA256. + Added a "ForceCommand" directive to sshd_config(5). Similar to the command="..." option accepted in ~/.ssh/authorized_keys, this forces the execution of the specified command regardless of what the user requested. This is very useful in conjunction with the new "Match" option. + Add a "PermitOpen" directive to sshd_config(5). This mirrors the permitopen="..." authorized_keys option, allowing fine-grained control over the port-forwardings that a user is allowed to establish. + Add optional logging of transactions to sftp-server(8). + ssh(1) will now record port numbers for hosts stored in ~/.ssh/known_hosts when a non-standard port has been requested (closes: #50612). + Add an "ExitOnForwardFailure" option to cause ssh(1) to exit (with a non-zero exit code) when requested port forwardings could not be established. + Extend sshd_config(5) "SubSystem" declarations to allow the specification of command-line arguments. + Replacement of all integer overflow susceptible invocations of malloc(3) and realloc(3) with overflow-checking equivalents. + Many manpage fixes and improvements. + Add optional support for OpenSSL hardware accelerators (engines), enabled using the --with-ssl-engine configure option. + Tokens in configuration files may be double-quoted in order to contain spaces (closes: #319639). + Move a debug() call out of a SIGCHLD handler, fixing a hang when the session exits very quickly (closes: #307890). + Fix some incorrect buffer allocation calculations (closes: #410599). + ssh-add doesn't ask for a passphrase if key file permissions are too liberal (closes: #103677). + Likewise, ssh doesn't ask either (closes: #99675). - 4.6/4.6p1 (http://www.openssh.org/txt/release-4.6): + sshd now allows the enabling and disabling of authentication methods on a per user, group, host and network basis via the Match directive in sshd_config. + Fixed an inconsistent check for a terminal when displaying scp progress meter (closes: #257524). + Fix "hang on exit" when background processes are running at the time of exit on a ttyful/login session (closes: #88337). * Update to current GSSAPI patch from http://www.sxw.org.uk/computing/patches/openssh-4.6p1-gsskex-20070312.patch; install ChangeLog.gssapi.
2007-06-05 - djm@cvs.openbsd.org 2007/05/22 10:18:52Darren Tucker
[sshd.c] zap double include; from p_nowaczyk AT o2.pl (not required in -portable, Id sync only)
2007-03-21 - dtucker@cvs.openbsd.org 2007/03/09 05:20:06Darren Tucker
[servconf.c sshd.c] Move C/R -> kbdint special case to after the defaults have been loaded, which makes ChallengeResponse default to yes again. This was broken by the Match changes and not fixed properly subsequently. Found by okan at demirmen.com, ok djm@ "please do it" deraadt@
2007-02-25 - dtucker@cvs.openbsd.org 2007/02/21 11:00:05Darren Tucker
[sshd.c] Clear alarm() before restarting sshd on SIGHUP. Without this, if there's a SIGALRM pending (for SSH1 key regeneration) when sshd is SIGHUP'ed, the newly exec'ed sshd will get the SIGALRM and not have a handler for it, and the default action will terminate the listening sshd. Analysis and patch from andrew at gaul.org.
2006-11-07 - markus@cvs.openbsd.org 2006/11/06 21:25:28Darren Tucker
[auth-rsa.c kexgexc.c kexdhs.c key.c ssh-dss.c sshd.c kexgexs.c ssh-keygen.c bufbn.c moduli.c scard.c kexdhc.c sshconnect1.c dh.c rsa.c] add missing checks for openssl return codes; with & ok djm@
2006-11-07 - (dtucker) [sshd.c] Use privsep_pw if we have it, but only require itDarren Tucker
if we absolutely need it. Pointed out by Corinna, ok djm@
2006-10-18 - (dtucker) [sshd.c] Reshuffle storing of pw struct; prevents warningsDarren Tucker
on older versions of OS X. ok djm@
2006-09-29 - CVE-2006-5051: Fix an unsafe signal hander reported by Mark Dowd. TheColin Watson
signal handler was vulnerable to a race condition that could be exploited to perform a pre-authentication denial of service. On portable OpenSSH, this vulnerability could theoretically lead to pre-authentication remote code execution if GSSAPI authentication is enabled, but the likelihood of successful exploitation appears remote.
2006-09-17 - (djm) [sshd.c] Fix warning/API abuse; ok dtucker@Damien Miller
2006-09-07 - (djm) [sshd.c auth.c] Set up fakepw() with privsep uid/gid, so it canDamien Miller
be used to drop privilege to; fixes Solaris GSSAPI crash reported by Magnus Abrante; suggestion and feedback dtucker@ NB. this change will require that the privilege separation user must exist on all the time, not just when UsePrivilegeSeparation=yes
2006-09-01 - (djm) [audit-bsm.c audit.c auth-bsdauth.c auth-chall.c auth-pam.c]Damien Miller
[auth-rsa.c auth-shadow.c auth-sia.c auth1.c auth2-chall.c] [auth2-gss.c auth2-kbdint.c auth2-none.c authfd.c authfile.c] [cipher-3des1.c cipher-aes.c cipher-bf1.c cipher-ctr.c clientloop.c] [dh.c dns.c entropy.c gss-serv-krb5.c gss-serv.c hostfile.c kex.c] [kexdhc.c kexdhs.c kexgexc.c kexgexs.c key.c loginrec.c mac.c] [md5crypt.c monitor.c monitor_wrap.c readconf.c rsa.c] [scard-opensc.c scard.c session.c ssh-add.c ssh-agent.c ssh-dss.c] [ssh-keygen.c ssh-keysign.c ssh-rsa.c ssh.c sshconnect.c] [sshconnect1.c sshconnect2.c sshd.c rc4.diff] [openbsd-compat/bsd-cray.c openbsd-compat/port-aix.c] [openbsd-compat/port-linux.c openbsd-compat/port-solaris.c] [openbsd-compat/port-uw.c] Lots of headers for SCO OSR6, mainly adding stdarg.h for log.h; compile problems reported by rac AT tenzing.org
2006-08-31 - (djm) [CREDITS LICENCE Makefile.in auth.c configure.ac includes.h ]Damien Miller
[platform.c platform.h sshd.c openbsd-compat/Makefile.in] [openbsd-compat/openbsd-compat.h openbsd-compat/port-solaris.c] [openbsd-compat/port-solaris.h] Add support for Solaris process contracts, enabled with --use-solaris-contracts. Patch from Chad Mynhier, tweaked by dtucker@ and myself; ok dtucker@
2006-08-19 - markus@cvs.openbsd.org 2006/08/18 09:15:20Damien Miller
[auth.h session.c sshd.c] delay authentication related cleanups until we're authenticated and all alarms have been cancelled; ok deraadt
2006-08-19 - deraadt@cvs.openbsd.org 2006/08/18 09:13:26Damien Miller
[log.c log.h sshd.c] make signal handler termination path shorter; risky code pointed out by mark dowd; ok djm markus
2006-08-19 - djm@cvs.openbsd.org 2006/08/16 11:47:15Damien Miller
[sshd.c] factor inetd connection, TCP listen and main TCP accept loop out of main() into separate functions to improve readability; ok markus@
2006-08-05 - dtucker@cvs.openbsd.org 2006/08/05 07:52:52Darren Tucker
[auth2-none.c sshd.c monitor_wrap.c] Add headers required to build with KERBEROS5=no. ok djm@
2006-08-05 - (djm) [auth-pam.c auth-shadow.c auth2-none.c cleanup.c sshd.c]Damien Miller
[openbsd-compat/port-tun.c openbsd-compat/port-tun.h] Sprinkle more includes for Linux in
2006-08-05 - deraadt@cvs.openbsd.org 2006/08/03 03:34:42Damien Miller
[OVERVIEW atomicio.c atomicio.h auth-bsdauth.c auth-chall.c auth-krb5.c] [auth-options.c auth-options.h auth-passwd.c auth-rh-rsa.c auth-rhosts.c] [auth-rsa.c auth-skey.c auth.c auth.h auth1.c auth2-chall.c auth2-gss.c] [auth2-hostbased.c auth2-kbdint.c auth2-none.c auth2-passwd.c ] [auth2-pubkey.c auth2.c authfd.c authfd.h authfile.c bufaux.c bufbn.c] [buffer.c buffer.h canohost.c channels.c channels.h cipher-3des1.c] [cipher-bf1.c cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c] [compress.c deattack.c dh.c dispatch.c dns.c dns.h fatal.c groupaccess.c] [groupaccess.h gss-genr.c gss-serv-krb5.c gss-serv.c hostfile.c kex.c] [kex.h kexdh.c kexdhc.c kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c] [key.h log.c log.h mac.c match.c md-sha256.c misc.c misc.h moduli.c] [monitor.c monitor_fdpass.c monitor_mm.c monitor_mm.h monitor_wrap.c] [monitor_wrap.h msg.c nchan.c packet.c progressmeter.c readconf.c] [readconf.h readpass.c rsa.c scard.c scard.h scp.c servconf.c servconf.h] [serverloop.c session.c session.h sftp-client.c sftp-common.c] [sftp-common.h sftp-glob.c sftp-server.c sftp.c ssh-add.c ssh-agent.c] [ssh-dss.c ssh-gss.h ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh-rsa.c] [ssh.c ssh.h sshconnect.c sshconnect.h sshconnect1.c sshconnect2.c] [sshd.c sshlogin.c sshlogin.h sshpty.c sshpty.h sshtty.c ttymodes.c] [uidswap.c uidswap.h uuencode.c uuencode.h xmalloc.c xmalloc.h] [loginrec.c loginrec.h openbsd-compat/port-aix.c openbsd-compat/port-tun.h] almost entirely get rid of the culture of ".h files that include .h files" ok djm, sort of ok stevesk makes the pain stop in one easy step NB. portable commit contains everything *except* removing includes.h, as that will take a fair bit more work as we move headers that are required for portability workarounds to defines.h. (also, this step wasn't "easy")
2006-08-05 - stevesk@cvs.openbsd.org 2006/08/01 23:22:48Damien Miller
[auth-passwd.c auth-rhosts.c auth-rsa.c auth.c auth.h auth1.c] [auth2-chall.c auth2-pubkey.c authfile.c buffer.c canohost.c] [channels.c clientloop.c dh.c dns.c dns.h hostfile.c kex.c kexdhc.c] [kexgexc.c kexgexs.c key.c key.h log.c misc.c misc.h moduli.c] [monitor_wrap.c packet.c progressmeter.c readconf.c readpass.c scp.c] [servconf.c session.c sftp-client.c sftp-common.c sftp-server.c sftp.c] [ssh-add.c ssh-agent.c ssh-keygen.c ssh-keyscan.c ssh.c sshconnect.c] [sshconnect1.c sshconnect2.c sshd.c sshlogin.c sshtty.c uuencode.c] [uuencode.h xmalloc.c] move #include <stdio.h> out of includes.h
2006-08-05 - stevesk@cvs.openbsd.org 2006/07/26 13:57:17Damien Miller
[authfd.c authfile.c dh.c canohost.c channels.c clientloop.c compat.c] [hostfile.c kex.c log.c misc.c moduli.c monitor.c packet.c readpass.c] [scp.c servconf.c session.c sftp-server.c sftp.c ssh-add.c ssh-agent.c] [ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh.c sshconnect.c] [sshconnect1.c sshd.c xmalloc.c] move #include <stdlib.h> out of includes.h
2006-08-05 - stevesk@cvs.openbsd.org 2006/07/25 02:59:21Damien Miller
[channels.c clientloop.c packet.c scp.c serverloop.c sftp-client.c] [sftp-server.c ssh-agent.c ssh-keyscan.c sshconnect.c sshd.c] move #include <sys/time.h> out of includes.h
2006-07-24 - (djm) [acss.c auth-krb5.c auth-options.c auth-pam.c auth-shadow.c]Damien Miller
[canohost.c channels.c cipher-acss.c defines.h dns.c gss-genr.c] [gss-serv-krb5.c gss-serv.c log.h loginrec.c logintest.c readconf.c] [servconf.c ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh-rand-helper.c] [ssh.c sshconnect.c sshd.c openbsd-compat/bindresvport.c] [openbsd-compat/bsd-arc4random.c openbsd-compat/bsd-misc.c] [openbsd-compat/getrrsetbyname.c openbsd-compat/glob.c] [openbsd-compat/mktemp.c openbsd-compat/port-linux.c] [openbsd-compat/port-tun.c openbsd-compat/readpassphrase.c] [openbsd-compat/setproctitle.c openbsd-compat/xmmap.c] make the portable tree compile again - sprinkle unistd.h and string.h back in. Don't redefine __unused, as it turned out to be used in headers on Linux, and replace its use in auth-pam.c with ARGSUSED
2006-07-24 - stevesk@cvs.openbsd.org 2006/07/22 20:48:23Damien Miller
[atomicio.c auth-options.c auth-passwd.c auth-rhosts.c auth-rsa.c] [auth.c auth1.c auth2-chall.c auth2-hostbased.c auth2-passwd.c auth2.c] [authfd.c authfile.c bufaux.c bufbn.c buffer.c canohost.c channels.c] [cipher-3des1.c cipher-bf1.c cipher-ctr.c cipher.c clientloop.c] [compat.c deattack.c dh.c dns.c gss-genr.c gss-serv.c hostfile.c] [includes.h kex.c kexdhc.c kexdhs.c kexgexc.c kexgexs.c key.c log.c] [mac.c match.c md-sha256.c misc.c moduli.c monitor.c monitor_fdpass.c] [monitor_mm.c monitor_wrap.c msg.c nchan.c packet.c rsa.c] [progressmeter.c readconf.c readpass.c scp.c servconf.c serverloop.c] [session.c sftp-client.c sftp-common.c sftp-glob.c sftp-server.c sftp.c] [ssh-add.c ssh-agent.c ssh-dss.c ssh-keygen.c ssh-keyscan.c] [ssh-keysign.c ssh-rsa.c ssh.c sshconnect.c sshconnect1.c sshconnect2.c] [sshd.c sshlogin.c sshpty.c ttymodes.c uidswap.c xmalloc.c] move #include <string.h> out of includes.h