Age | Commit message (Collapse) | Author |
|
ssh: Enable ForwardX11Trusted, returning to earlier semantics which cause
fewer problems with existing setups (http://bugs.debian.org/237021).
ssh: Set 'SendEnv LANG LC_*' by default (http://bugs.debian.org/264024).
ssh: Enable HashKnownHosts by default to try to limit the spread of ssh
worms.
ssh: Enable GSSAPIAuthentication and disable GSSAPIDelegateCredentials by
default.
sshd: Refer to /usr/share/doc/openssh-server/README.Debian.gz alongside
PermitRootLogin default.
Document all of this, along with several sshd defaults set in
debian/openssh-server.postinst.
Author: Russ Allbery <rra@debian.org>
Forwarded: not-needed
Last-Update: 2013-09-14
Patch-Name: debian-config.patch
|
|
No single bug reference for this patch, but history includes:
http://bugs.debian.org/154434 (login.conf(5))
http://bugs.debian.org/513417 (/etc/rc)
http://bugs.debian.org/530692 (ssl(8))
https://bugs.launchpad.net/bugs/456660 (ssl(8))
Forwarded: not-needed
Last-Update: 2013-09-14
Patch-Name: openbsd-docs.patch
|
|
Setting this to "no" causes sshd to omit the Debian revision from its
initial protocol handshake, for those scared by package-versioning.patch.
Bug-Debian: http://bugs.debian.org/562048
Forwarded: not-needed
Last-Update: 2013-09-14
Patch-Name: debian-banner.patch
|
|
Add compatibility aliases for ProtocolKeepAlives and SetupTimeOut, supported
in previous versions of Debian's OpenSSH package but since superseded by
ServerAliveInterval. (We're probably stuck with this bit for
compatibility.)
In batch mode, default ServerAliveInterval to five minutes.
Adjust documentation to match and to give some more advice on use of
keepalives.
Author: Ian Jackson <ian@chiark.greenend.org.uk>
Author: Matthew Vernon <matthew@debian.org>
Author: Colin Watson <cjwatson@debian.org>
Last-Update: 2013-09-14
Patch-Name: keepalive-extensions.patch
|
|
This patch has been rejected upstream: "None of the OpenSSH developers are
in favour of adding this, and this situation has not changed for several
years. This is not a slight on Simon's patch, which is of fine quality, but
just that a) we don't trust GSSAPI implementations that much and b) we don't
like adding new KEX since they are pre-auth attack surface. This one is
particularly scary, since it requires hooks out to typically root-owned
system resources."
However, quite a lot of people rely on this in Debian, and it's better to
have it merged into the main openssh package rather than having separate
-krb5 packages (as we used to have). It seems to have a generally good
security history.
Bug: https://bugzilla.mindrot.org/show_bug.cgi?id=1242
Last-Updated: 2014-02-10
Patch-Name: gssapi.patch
|
|
[sshd_config.5]
Use a literal for the default value of KEXAlgorithms. ok deraadt jmc
|
|
[ssh-add.1 ssh-agent.1 ssh-keygen.1 ssh-keyscan.1 ssh-keysign.8 ssh.1]
[ssh_config.5 sshd.8 sshd_config.5]
add missing mentions of ed25519; ok djm@
|
|
[ssh_config.5 sshd_config.5]
no need for .Pp before displays;
|
|
[Makefile.in PROTOCOL PROTOCOL.chacha20poly1305 authfile.c chacha.c]
[chacha.h cipher-chachapoly.c cipher-chachapoly.h cipher.c cipher.h]
[dh.c myproposal.h packet.c poly1305.c poly1305.h servconf.c ssh.1]
[ssh.c ssh_config.5 sshd_config.5] Add a new protocol 2 transport
cipher "chacha20-poly1305@openssh.com" that combines Daniel
Bernstein's ChaCha20 stream cipher and Poly1305 MAC to build an
authenticated encryption mode.
Inspired by and similar to Adam Langley's proposal for TLS:
http://tools.ietf.org/html/draft-agl-tls-chacha20poly1305-03
but differs in layout used for the MAC calculation and the use of a
second ChaCha20 instance to separately encrypt packet lengths.
Details are in the PROTOCOL.chacha20poly1305 file.
Feedback markus@, naddy@; manpage bits Loganden Velvindron @ AfriNIC
ok markus@ naddy@
|
|
[ssh_config.5 sshd_config.5]
the default kex is now curve25519-sha256@libssh.org
|
|
[sshd_config.5]
pty(4), not pty(7);
|
|
[servconf.c servconf.h session.c sshd_config sshd_config.5]
shd_config PermitTTY to disallow TTY allocation, mirroring the
longstanding no-pty authorized_keys option;
bz#2070, patch from Teran McKinney; ok markus@
|
|
[readconf.c servconf.c ssh_config.5 sshd_config.5]
Disallow empty Match statements and add "Match all" which matches
everything. ok djm, man page help jmc@
|
|
[auth.h kex.h kexdhs.c kexecdhs.c kexgexs.c monitor.c servconf.c]
[servconf.h session.c sshd.c sshd_config.5]
add ssh-agent(1) support to sshd(8); allows encrypted hostkeys,
or hostkeys on smartcards; most of the work by Zev Weiss; bz #1974
ok djm@
|
|
[ssh-keygen.1 ssh.1 ssh_config.5 sshd.8 sshd_config.5]
do not use Sx for sections outwith the man page - ingo informs me that
stuff like html will render with broken links;
issue reported by Eric S. Raymond, via djm
|
|
[sshd_config.5]
oops! avoid Xr to self;
|
|
[sshd_config.5 servconf.c servconf.h packet.c serverloop.c monitor.c sshd_config
sshd.c] Add RekeyLimit to sshd with the same syntax as the client allowing
rekeying based on traffic volume or time. ok djm@, help & ok jmc@ for the man
page.
|
|
[sshd_config.5]
document the requirment that the AuthorizedKeysCommand be owned by root;
ok dtucker@ markus@
|
|
[auth.h auth2-chall.c auth2.c monitor.c sshd_config.5]
add submethod support to AuthenticationMethods; ok and freedback djm@
|
|
[servconf.c sshd_config sshd_config.5]
Change default of MaxStartups to 10:30:100 to start doing random early
drop at 10 connections up to 100 connections. This will make it harder
to DoS as CPUs have come a long way since the original value was set
back in 2000. Prompted by nion at debian org, ok markus@
|
|
[sshd_config.5]
tweak previous;
|
|
[auth.c key.c key.h ssh-keygen.1 ssh-keygen.c sshd_config.5]
[krl.c krl.h PROTOCOL.krl]
add support for Key Revocation Lists (KRLs). These are a compact way to
represent lists of revoked keys and certificates, taking as little as
a single bit of incremental cost to revoke a certificate by serial number.
KRLs are loaded via the existing RevokedKeys sshd_config option.
feedback and ok markus@
|
|
[PROTOCOL authfile.c cipher.c cipher.h kex.c kex.h monitor_wrap.c]
[myproposal.h packet.c ssh_config.5 sshd_config.5]
support AES-GCM as defined in RFC 5647 (but with simpler KEX handling)
ok and feedback djm@
|
|
[PROTOCOL authfile.c cipher.c cipher.h kex.h mac.c myproposal.h]
[packet.c ssh_config.5 sshd_config.5]
add encrypt-then-mac (EtM) modes to openssh by defining new mac algorithms
that change the packet format and compute the MAC over the encrypted
message (including the packet size) instead of the plaintext data;
these EtM modes are considered more secure and used by default.
feedback and ok djm@
|
|
[ssh-add.1 sshd_config.5]
tweak previous;
|
|
[auth-options.c channels.c servconf.c servconf.h serverloop.c session.c]
[sshd_config.5]
make AllowTcpForwarding accept "local" and "remote" in addition to its
current "yes"/"no" to allow the server to specify whether just local or
remote TCP forwarding is enabled. ok markus@
|
|
[auth.h auth1.c auth2.c monitor.c servconf.c servconf.h sshd.c]
[sshd_config.5]
Support multiple required authentication via an AuthenticationMethods
option. This option lists one or more comma-separated lists of
authentication method names. Successful completion of all the methods in
any list is required for authentication to complete;
feedback and ok markus@
|
|
[auth2-pubkey.c sshd.c sshd_config.5]
Remove default of AuthorizedCommandUser. Administrators are now expected
to explicitly specify a user. feedback and ok markus@
|
|
- jmc@cvs.openbsd.org 2012/10/31 08:04:50
[sshd_config.5]
tweak previous;
|
|
[auth-rsa.c auth.c auth.h auth2-pubkey.c servconf.c servconf.h]
[sshd.c sshd_config sshd_config.5]
new sshd_config option AuthorizedKeysCommand to support fetching
authorized_keys from a command in addition to (or instead of) from
the filesystem. The command is run as the target server user unless
another specified via a new AuthorizedKeysCommandUser option.
patch originally by jchadima AT redhat.com, reworked by me; feedback
and ok markus@
|
|
[myproposal.h ssh_config.5 umac.h sshd_config.5 ssh.1 sshd.8 mac.c]
add umac128 variant; ok djm@ at n2k12
(note: further Makefile work is required)
|
|
[ssh_config.5 sshd_config.5]
match the documented MAC order of preference to the actual one;
ok dtucker@
|
|
[mac.c myproposal.h ssh_config.5 sshd_config.5]
Remove hmac-sha2-256-96 and hmac-sha2-512-96 MACs since they were removed
from draft6 of the spec and will not be in the RFC when published. Patch
from mdb at juniper net via bz#2023, ok markus.
|
|
[sshd_config.5]
tweak previous; ok markus
|
|
[servconf.c servconf.h sshd_config.5]
sshd_config: extend Match to allow AcceptEnv and {Allow,Deny}{Users,Groups}
this allows 'Match LocalPort 1022' combined with 'AllowUser bauer'
ok djm@ (back in March)
|
|
[sshd_config.5]
Document PermitOpen none. bz#2001, patch from Loganaden Velvindron
|
|
- dtucker@cvs.openbsd.org 2012/05/13 01:42:32
[servconf.h servconf.c sshd.8 sshd.c auth.c sshd_config.5]
Add "Match LocalAddress" and "Match LocalPort" to sshd and adjust tests
to match. Feedback and ok djm@ markus@.
|
|
[sshd_config sshd_config.5]
mention AuthorizedPrincipalsFile=none default
|
|
[servconf.c servconf.h sshd.c sshd_config sshd_config.5]
VersionAddendum option to allow server operators to append some arbitrary
text to the SSH-... banner; ok deraadt@ "don't care" markus@
|
|
[ssh_config.5 sshd_config.5]
fix typo in IPQoS parsing: there is no "AF14" class, but there is
an "AF21" class. Spotted by giesen AT snickers.org; ok markus stevesk
|
|
[mac.c myproposal.h ssh.1 ssh_config.5 sshd.8 sshd_config.5]
Add new SHA256 and SHA512 based HMAC modes from
http://www.ietf.org/id/draft-dbider-sha2-mac-for-ssh-02.txt
Patch from mdb AT juniper.net; feedback and ok markus@
|
|
[servconf.c servconf.h sshd.c sshd_config.5 sandbox-rlimit.c]
[sandbox-systrace.c sandbox.h configure.ac Makefile.in]
introduce sandboxing of the pre-auth privsep child using systrace(4).
This introduces a new "UsePrivilegeSeparation=sandbox" option for
sshd_config that applies mandatory restrictions on the syscalls the
privsep child can perform. This prevents a compromised privsep child
from being used to attack other hosts (by opening sockets and proxying)
or probing local kernel attack surface.
The sandbox is implemented using systrace(4) in unsupervised "fast-path"
mode, where a list of permitted syscalls is supplied. Any syscall not
on the list results in SIGKILL being sent to the privsep child. Note
that this requires a kernel with the new SYSTR_POLICY_KILL option.
UsePrivilegeSeparation=sandbox will become the default in the future
so please start testing it now.
feedback dtucker@; ok markus@
|
|
[sshd.8 sshd_config.5]
tweak previous; ok djm
|
|
- djm@cvs.openbsd.org 2011/05/23 03:30:07
[auth-rsa.c auth.c auth.h auth2-pubkey.c monitor.c monitor_wrap.c pathnames.h servconf.c servconf.h sshd.8 sshd_config sshd_config.5]
allow AuthorizedKeysFile to specify multiple files, separated by spaces.
Bring back authorized_keys2 as a default search path (to avoid breaking
existing users of this file), but override this in sshd_config so it will
be no longer used on fresh installs. Maybe in 2015 we can remove it
entierly :)
feedback and ok markus@ dtucker@
|
|
[ssh_config.5 sshd_config.5]
explain that IPQoS arguments are separated by whitespace; iirc requested
by jmc@ a while back
|
|
[scp.1 sftp.1 ssh.1 sshd_config.5]
add IPQoS to the various -o lists, and zap some trailing whitespace;
|
|
[clientloop.c misc.c misc.h packet.c packet.h readconf.c readconf.h]
[servconf.c servconf.h session.c ssh.c ssh_config.5 sshd_config.5]
allow ssh and sshd to set arbitrary TOS/DSCP/QoS values instead of
hardcoding lowdelay/throughput.
bz#1733 patch from philipp AT redfish-solutions.com; ok markus@ deraadt@
|
|
[scp.1 ssh-add.1 ssh-keygen.1 ssh.1 ssh_config.5 sshd.8 sshd_config.5]
knock out some "-*- nroff -*-" lines;
|
|
[kex.c kex.h kexecdh.c kexecdhc.c kexecdhs.c readconf.c readconf.h]
[servconf.c servconf.h ssh_config.5 sshconnect2.c sshd.c sshd_config.5]
add a KexAlgorithms knob to the client and server configuration to allow
selection of which key exchange methods are used by ssh(1) and sshd(8)
and their order of preference.
ok markus@
|
|
[PROTOCOL PROTOCOL.agent PROTOCOL.certkeys auth2-jpake.c authfd.c]
[authfile.c buffer.h dns.c kex.c kex.h key.c key.h monitor.c]
[monitor_wrap.c myproposal.h packet.c packet.h pathnames.h readconf.c]
[ssh-add.1 ssh-add.c ssh-agent.1 ssh-agent.c ssh-keygen.1 ssh-keygen.c]
[ssh-keyscan.1 ssh-keyscan.c ssh-keysign.8 ssh.1 ssh.c ssh2.h]
[ssh_config.5 sshconnect.c sshconnect2.c sshd.8 sshd.c sshd_config.5]
[uuencode.c uuencode.h bufec.c kexecdh.c kexecdhc.c kexecdhs.c ssh-ecdsa.c]
Implement Elliptic Curve Cryptography modes for key exchange (ECDH) and
host/user keys (ECDSA) as specified by RFC5656. ECDH and ECDSA offer
better performance than plain DH and DSA at the same equivalent symmetric
key length, as well as much shorter keys.
Only the mandatory sections of RFC5656 are implemented, specifically the
three REQUIRED curves nistp256, nistp384 and nistp521 and only ECDH and
ECDSA. Point compression (optional in RFC5656 is NOT implemented).
Certificate host and user keys using the new ECDSA key types are supported.
Note that this code has not been tested for interoperability and may be
subject to change.
feedback and ok markus@
|