Age | Commit message (Collapse) | Author |
|
[auth2-none.c sshd_config sshd_config.5]
Support "Banner=none" to disable displaying of the pre-login banner;
ok dtucker@ deraadt@
|
|
[sshd_config]
Disable the legacy SSH protocol 1 for new installations via
a configuration override. In the future, we will change the
server's default itself so users who need the legacy protocol
will need to turn it on explicitly
|
|
[servconf.c servconf.h session.c sshd.8 sshd_config sshd_config.5]
Add ForceCommand keyword to sshd_config, equivalent to the "command="
key option, man page entry and example in sshd_config.
Feedback & ok djm@, man page corrections & ok jmc@
|
|
reality. Pointed out by tryponraj at gmail.com.
|
|
[auth-options.c auth-options.h channels.c channels.h clientloop.c]
[misc.c misc.h readconf.c readconf.h scp.c servconf.c servconf.h]
[serverloop.c sftp.c ssh.1 ssh.c ssh_config ssh_config.5 sshconnect.c]
[sshconnect.h sshd.8 sshd_config sshd_config.5]
Add support for tun(4) forwarding over OpenSSH, based on an idea and
initial channel code bits by markus@. This is a simple and easy way to
use OpenSSH for ad hoc virtual private network connections, e.g.
administrative tunnels or secure wireless access. It's based on a new
ssh channel and works similar to the existing TCP forwarding support,
except that it depends on the tun(4) network interface on both ends of
the connection for layer 2 or layer 3 tunneling. This diff also adds
support for LocalCommand in the ssh(1) client.
ok djm@, markus@, jmc@ (manpages), tested and discussed with others
|
|
[kex.c kex.h myproposal.h packet.c packet.h servconf.c session.c]
[sshconnect2.c sshd.c sshd_config sshd_config.5]
add a new compression method that delays compression until the user
has been authenticated successfully and set compression to 'delayed'
for sshd.
this breaks older openssh clients (< 3.5) if they insist on
compression, so you have to re-enable compression in sshd_config.
ok djm@
|
|
[sshd_config]
whitespace nit, from grunk AT pestilenz.org
|
|
[servconf.c servconf.h sshd.c sshd_config sshd_config.5]
bz #898: support AddressFamily in sshd_config. from
peak@argo.troja.mff.cuni.cz; ok deraadt@
|
|
[auth.c auth.h auth1.c auth2.c servconf.c servconf.h sshd_config sshd_config.5]
Add MaxAuthTries sshd config option; ok markus@
|
|
ok dtucker@
|
|
[sshd_config]
KeepAlive has been obsoleted, use TCPKeepAlive instead; markus@ OK
|
|
[servconf.c servconf.h session.c sshd_config]
implement KerberosGetAFSToken server option. ok markus@, beck@
|
|
|
|
[servconf.c sshd_config]
GSSAPICleanupCreds -> GSSAPICleanupCredentials
|
|
|
|
[auth-krb5.c auth.h auth1.c monitor.c monitor.h monitor_wrap.c]
[monitor_wrap.h readconf.c servconf.c session.c ssh_config.5]
[sshconnect1.c sshd.c sshd_config sshd_config.5]
remove kerberos support from ssh1, since it has been replaced with GSSAPI;
but keep kerberos passwd auth for ssh1 and 2; ok djm, hin, henning, ...
|
|
[auth2.c auth2-gss.c auth.h compat.c compat.h gss-genr.c gss-serv-krb5.c
gss-serv.c monitor.c monitor.h monitor_wrap.c monitor_wrap.h readconf.c
readconf.h servconf.c servconf.h session.c session.h ssh-gss.h
ssh_config.5 sshconnect2.c sshd_config sshd_config.5]
support GSS API user authentication; patches from Simon Wilkinson,
stripped down and tested by Jakob and myself.
|
|
[auth1.c readconf.c readconf.h servconf.c servconf.h ssh.c ssh_config
ssh_config.5 sshconnect1.c sshd.8 sshd.c sshd_config sshd_config.5]
remove RhostsAuthentication; suggested by djm@ before; ok djm@, deraadt@,
fgsch@, miod@, henning@, jakob@ and others
|
|
[sshd_config]
remove AFS; itojun@
|
|
- (dtucker) OpenBSD CVS Sync
- djm@cvs.openbsd.org 2003/06/20 05:48:21
[sshd_config]
sync some implemented options; ok markus@
|
|
- markus@cvs.openbsd.org 2003/06/02 09:17:34
[auth2-hostbased.c auth.c auth-options.c auth-rhosts.c auth-rh-rsa.c]
[canohost.c monitor.c servconf.c servconf.h session.c sshd_config]
[sshd_config.5]
deprecate VerifyReverseMapping since it's dangerous if combined
with IP based access control as noted by Mike Harding; replace with
a UseDNS option, UseDNS is on by default and includes the
VerifyReverseMapping check; with itojun@, provos@, jakob@ and deraadt@
ok deraadt@, djm@
- (djm) Fix portable-specific uses of verify_reverse_mapping too
|
|
|
|
[readconf.c readconf.h servconf.c servconf.h]
always parse kerberos options. ok djm@ markus@
- (djm) Always parse UsePAM
|
|
- markus@cvs.openbsd.org 2002/09/25 11:17:16
[sshd_config]
sync LoginGraceTime with default
|
|
[servconf.c sshd.8 sshd_config sshd_config.5]
change LoginGraceTime default to 1 minute; ok mouring@ markus@
|
|
[auth-options.c servconf.c servconf.h session.c sshd_config sshd_config.5]
add PermitUserEnvironment (off by default!); from dot@dotat.at;
ok provos, deraadt
|
|
- (stevesk) [sshd_config] PAMAuthenticationViaKbdInt no; commented
options should contain default value. from solar.
|
|
[sshd_config]
add Compression
|
|
[ssh_config sshd_config]
refer to config file man page
|
|
[servconf.c sshd.8 sshd_config]
re-enable privsep and disable setuid for post-3.2.2
|
|
[servconf.c sshd.8 sshd_config]
disable privsep and enable setuid for the 3.2.2 release
|
|
[servconf.c sshd.8 sshd_config]
enable privsep by default; provos ok
(historical)
|
|
[servconf.c sshd.8 sshd_config]
do not auto-enable KerberosAuthentication; ok djm@, provos@, deraadt@
|
|
[sshd.8 sshd_config]
document default AFSTokenPassing no; ok deraadt@
|
|
[sshd_config]
add privsep (off)
|
|
|
|
[sshd_config]
stategy is not an english word
|
|
- deraadt@cvs.openbsd.org 2002/02/09 17:37:34
[pathnames.h session.c ssh.1 sshd.8 sshd_config ssh-keyscan.1]
move ssh config files to /etc/ssh
- (djm) Adjust portable Makefile.in tnd ssh-rand-helper.c o match
|
|
[auth2.c auth.c auth-options.c auth-rhosts.c auth-rh-rsa.c canohost.c servconf.c servconf.h session.c sshd.8 sshd_config]
s/ReverseMappingCheck/VerifyReverseMapping/ and avoid confusion; ok stevesk@
|
|
[channels.c servconf.c servconf.h session.c sshd.8 sshd_config]
add X11UseLocalhost; ok markus@
|
|
[sshd_config] put back in line that tells what PATH was compiled into sshd.
|
|
[sshd_config]
The stategy now used for options in the default sshd_config shipped
with OpenSSH is to specify options with their default value where
possible, but leave them commented. Uncommented options change a
default value. Subsystem is currently the only default option
changed. ok markus@
|
|
[auth1.c auth2.c auth2-chall.c auth-bsdauth.c auth.c authfile.c auth.h]
[auth-krb4.c auth-rhosts.c auth-skey.c bufaux.c canohost.c channels.c]
[cipher.c clientloop.c compat.c compress.c deattack.c key.c log.c mac.c]
[match.c misc.c nchan.c packet.c readconf.c rijndael.c rijndael.h scard.c]
[servconf.c servconf.h serverloop.c session.c sftp.c sftp-client.c]
[sftp-glob.c sftp-int.c sftp-server.c ssh-add.c ssh-agent.c ssh.c]
[sshconnect1.c sshconnect2.c sshconnect.c sshd.8 sshd.c sshd_config]
[ssh-keygen.c sshlogin.c sshpty.c sshtty.c ttymodes.c uidswap.c]
basic KNF done while i was looking for something else
|
|
[sshd_config]
CheckMail removed. OKed stevesk@
|
|
[auth2.c auth-rsa.c pathnames.h ssh.1 sshd.8 sshd_config
ssh-keygen.1]
merge authorized_keys2 into authorized_keys.
authorized_keys2 is used for backward compat.
(just append authorized_keys2 to authorized_keys).
|
|
[sshd_config]
group options and add some more comments
|
|
[auth-rsa.c auth.c auth.h auth2.c servconf.c servconf.h sshd.8
sshd_config]
configurable authorized_keys{,2} location; originally from peter@;
ok djm@
|
|
(default: off), implies KbdInteractiveAuthentication. Suggestion from
markus@
|
|
|
|
[auth-rhosts.c auth.h auth2.c buffer.c canohost.c canohost.h
compat.c compat.h hostfile.c pathnames.h readconf.c readconf.h
servconf.c servconf.h ssh.c sshconnect.c sshconnect.h sshconnect1.c
sshconnect2.c sshd_config]
implement HostbasedAuthentication (= RhostRSAAuthentication for ssh v2)
similar to RhostRSAAuthentication unless you enable (the experimental)
HostbasedUsesNameFromPacketOnly option. please test. :)
|