#!/bin/sh
#
# ssh-host-config, Copyright 2000, Red Hat Inc.
#
# This file is part of the Cygwin port of OpenSSH.

# Subdirectory where the new package is being installed
PREFIX=/usr

# Directory where the config files are stored
SYSCONFDIR=/etc

# Subdirectory where an old package might be installed
OLDPREFIX=/usr/local
OLDSYSCONFDIR=${OLDPREFIX}/etc

progname=$0
auto_answer=""
port_number=22

request()
{
  if [ "${auto_answer}" = "yes" ]
  then
    return 0
  elif [ "${auto_answer}" = "no" ]
  then
    return 1
  fi

  answer=""
  while [ "X${answer}" != "Xyes" -a "X${answer}" != "Xno" ]
  do
    echo -n "$1 (yes/no) "
    read answer
  done
  if [ "X${answer}" = "Xyes" ]
  then
    return 0
  else
    return 1
  fi
}

# Check options

while :
do
  case $# in
  0)
    break
    ;;
  esac

  option=$1
  shift

  case "$option" in
  -d | --debug )
    set -x
    ;;

  -y | --yes )
    auto_answer=yes
    ;;

  -n | --no )
    auto_answer=no
    ;;

  -p | --port )
    port_number=$1
    shift
    ;;

  *)
    echo "usage: ${progname} [OPTION]..."
    echo
    echo "This script creates an OpenSSH host configuration."
    echo
    echo "Options:"
    echo "    --debug  -d     Enable shell's debug output."
    echo "    --yes    -y     Answer all questions with \"yes\" automatically."
    echo "    --no     -n     Answer all questions with \"no\" automatically."
    echo "    --port   -p <n> sshd listens on port n."
    echo
    exit 1
    ;;

  esac
done

# Check for running ssh/sshd processes first. Refuse to do anything while
# some ssh processes are still running

if ps -ef | grep -v grep | grep -q ssh
then
  echo
  echo "There are still ssh processes running. Please shut them down first."
  echo
  exit 1
fi

# Check for ${SYSCONFDIR} directory

if [ -e "${SYSCONFDIR}" -a ! -d "${SYSCONFDIR}" ]
then
  echo
  echo "${SYSCONFDIR} is existant but not a directory."
  echo "Cannot create global configuration files."
  echo
  exit 1
fi

# Create it if necessary

if [ ! -e "${SYSCONFDIR}" ]
then
  mkdir "${SYSCONFDIR}"
  if [ ! -e "${SYSCONFDIR}" ]
  then
    echo
    echo "Creating ${SYSCONFDIR} directory failed"
    echo
    exit 1
  fi
fi

# Check for an old installation in ${OLDPREFIX} unless ${OLDPREFIX} isn't
# the same as ${PREFIX}

old_install=0
if [ "${OLDPREFIX}" != "${PREFIX}" ]
then
  if [ -f "${OLDPREFIX}/sbin/sshd" ]
  then
    echo
    echo "You seem to have an older installation in ${OLDPREFIX}."
    echo
    # Check if old global configuration files exist
    if [ -f "${OLDSYSCONFDIR}/ssh_host_key" ]
    then
      if request "Do you want to copy your config files to your new installation?"
      then
        cp -f ${OLDSYSCONFDIR}/ssh_host_key ${SYSCONFDIR}
        cp -f ${OLDSYSCONFDIR}/ssh_host_key.pub ${SYSCONFDIR}
        cp -f ${OLDSYSCONFDIR}/ssh_host_dsa_key ${SYSCONFDIR}
        cp -f ${OLDSYSCONFDIR}/ssh_host_dsa_key.pub ${SYSCONFDIR}
        cp -f ${OLDSYSCONFDIR}/ssh_config ${SYSCONFDIR}
        cp -f ${OLDSYSCONFDIR}/sshd_config ${SYSCONFDIR}
      fi
    fi
    if request "Do you want to erase your old installation?"
    then
      rm -f ${OLDPREFIX}/bin/ssh.exe
      rm -f ${OLDPREFIX}/bin/ssh-config
      rm -f ${OLDPREFIX}/bin/scp.exe
      rm -f ${OLDPREFIX}/bin/ssh-add.exe
      rm -f ${OLDPREFIX}/bin/ssh-agent.exe
      rm -f ${OLDPREFIX}/bin/ssh-keygen.exe
      rm -f ${OLDPREFIX}/bin/slogin
      rm -f ${OLDSYSCONFDIR}/ssh_host_key
      rm -f ${OLDSYSCONFDIR}/ssh_host_key.pub
      rm -f ${OLDSYSCONFDIR}/ssh_host_dsa_key
      rm -f ${OLDSYSCONFDIR}/ssh_host_dsa_key.pub
      rm -f ${OLDSYSCONFDIR}/ssh_config
      rm -f ${OLDSYSCONFDIR}/sshd_config
      rm -f ${OLDPREFIX}/man/man1/ssh.1
      rm -f ${OLDPREFIX}/man/man1/scp.1
      rm -f ${OLDPREFIX}/man/man1/ssh-add.1
      rm -f ${OLDPREFIX}/man/man1/ssh-agent.1
      rm -f ${OLDPREFIX}/man/man1/ssh-keygen.1
      rm -f ${OLDPREFIX}/man/man1/slogin.1
      rm -f ${OLDPREFIX}/man/man8/sshd.8
      rm -f ${OLDPREFIX}/sbin/sshd.exe
      rm -f ${OLDPREFIX}/sbin/sftp-server.exe
    fi
    old_install=1
  fi
fi

# First generate host keys if not already existing

if [ ! -f "${SYSCONFDIR}/ssh_host_key" ]
then
  echo "Generating ${SYSCONFDIR}/ssh_host_key"
  ssh-keygen -t rsa1 -f ${SYSCONFDIR}/ssh_host_key -N '' > /dev/null
fi

if [ ! -f "${SYSCONFDIR}/ssh_host_rsa_key" ]
then
  echo "Generating ${SYSCONFDIR}/ssh_host_rsa_key"
  ssh-keygen -t rsa -f ${SYSCONFDIR}/ssh_host_rsa_key -N '' > /dev/null
fi

if [ ! -f "${SYSCONFDIR}/ssh_host_dsa_key" ]
then
  echo "Generating ${SYSCONFDIR}/ssh_host_dsa_key"
  ssh-keygen -t dsa -f ${SYSCONFDIR}/ssh_host_dsa_key -N '' > /dev/null
fi

# Check if ssh_config exists. If yes, ask for overwriting

if [ -f "${SYSCONFDIR}/ssh_config" ]
then
  if request "Overwrite existing ${SYSCONFDIR}/ssh_config file?"
  then
    rm -f "${SYSCONFDIR}/ssh_config"
    if [ -f "${SYSCONFDIR}/ssh_config" ]
    then
      echo "Can't overwrite. ${SYSCONFDIR}/ssh_config is write protected."
    fi
  fi
fi

# Create default ssh_config from here script

if [ ! -f "${SYSCONFDIR}/ssh_config" ]
then
  echo "Generating ${SYSCONFDIR}/ssh_config file"
  cat > ${SYSCONFDIR}/ssh_config << EOF
# This is ssh client systemwide configuration file.  This file provides 
# defaults for users, and the values can be changed in per-user configuration
# files or on the command line.

# Configuration data is parsed as follows:
#  1. command line options
#  2. user-specific file
#  3. system-wide file
# Any configuration value is only changed the first time it is set.
# Thus, host-specific definitions should be at the beginning of the
# configuration file, and defaults at the end.

# Site-wide defaults for various options

# Host *
#   ForwardAgent yes
#   ForwardX11 yes
#   RhostsAuthentication yes
#   RhostsRSAAuthentication yes
#   RSAAuthentication yes
#   PasswordAuthentication yes
#   FallBackToRsh no
#   UseRsh no
#   BatchMode no
#   CheckHostIP yes
#   StrictHostKeyChecking no
#   Port 22
#   Protocol 2,1
#   Cipher 3des
#   EscapeChar ~

# Be paranoid by default
Host *
        ForwardAgent no
        ForwardX11 no
        FallBackToRsh no

# Try authentification with the following identities
        IdentityFile ~/.ssh/identity
        IdentityFile ~/.ssh/id_rsa
        IdentityFile ~/.ssh/id_dsa
EOF
  if [ "$port_number" != "22" ]
  then
    echo "Host localhost" >> ${SYSCONFDIR}/ssh_config
    echo "    Port $port_number" >> ${SYSCONFDIR}/ssh_config
  fi
fi

# Check if sshd_config exists. If yes, ask for overwriting

if [ -f "${SYSCONFDIR}/sshd_config" ]
then
  if request "Overwrite existing ${SYSCONFDIR}/sshd_config file?"
  then
    rm -f "${SYSCONFDIR}/sshd_config"
    if [ -f "${SYSCONFDIR}/sshd_config" ]
    then
      echo "Can't overwrite. ${SYSCONFDIR}/sshd_config is write protected."
    fi
  fi
fi

# Create default sshd_config from here script

if [ ! -f "${SYSCONFDIR}/sshd_config" ]
then
  echo "Generating ${SYSCONFDIR}/sshd_config file"
  cat > ${SYSCONFDIR}/sshd_config << EOF
# This is ssh server systemwide configuration file.

Port $port_number
#
Protocol 2,1
ListenAddress 0.0.0.0
#ListenAddress ::
#
# Uncomment the following lines according to the used authentication
HostKey /etc/ssh_host_key
HostKey /etc/ssh_host_rsa_key
HostKey /etc/ssh_host_dsa_key
ServerKeyBits 768
LoginGraceTime 600
KeyRegenerationInterval 3600
PermitRootLogin yes
#
# Don't read ~/.rhosts and ~/.shosts files
IgnoreRhosts yes
# Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication
#IgnoreUserKnownHosts yes

#
# The following setting overrides permission checks on host key files
# and directories. For security reasons set this to "yes" when running
# NT/W2K, NTFS and CYGWIN=ntsec.
StrictModes no

X11Forwarding no
X11DisplayOffset 10
PrintMotd yes
KeepAlive yes

# Logging
SyslogFacility AUTH
LogLevel INFO
#obsoletes QuietMode and FascistLogging

RhostsAuthentication no
#
# For this to work you will also need host keys in /etc/ssh_known_hosts
RhostsRSAAuthentication no

RSAAuthentication yes

PasswordAuthentication yes
PermitEmptyPasswords no

CheckMail no
UseLogin no

#Uncomment if you want to enable sftp
#Subsystem      sftp    /usr/sbin/sftp-server
#MaxStartups 10:30:60
EOF
fi

# Care for services file
_sys="`uname -a`"
_nt=`expr "$_sys" : "CYGWIN_NT"`
if [ $_nt -gt 0 ]
then
  _wservices="${SYSTEMROOT}\\system32\\drivers\\etc\\services"
  _wserv_tmp="${SYSTEMROOT}\\system32\\drivers\\etc\\srv.out.$$"
else
  _wservices="${WINDIR}\\SERVICES"
  _wserv_tmp="${WINDIR}\\SERV.$$"
fi
_services=`cygpath -u "${_wservices}"`
_serv_tmp=`cygpath -u "${_wserv_tmp}"`

mount -t -f "${_wservices}" "${_services}"
mount -t -f "${_wserv_tmp}" "${_serv_tmp}"

# Remove sshd 22/port from services
if [ `grep -q 'sshd[ \t][ \t]*22' "${_services}"; echo $?` -eq 0 ]
then
  grep -v 'sshd[ \t][ \t]*22' "${_services}" > "${_serv_tmp}"
  if [ -f "${_serv_tmp}" ]
  then 
    if mv "${_serv_tmp}" "${_services}"
    then
      echo "Removing sshd from ${_services}"
    else
      echo "Removing sshd from ${_services} failed\!"
    fi 
    rm -f "${_serv_tmp}"
  else
    echo "Removing sshd from ${_services} failed\!"
  fi
fi

# Add ssh 22/tcp  and ssh 22/udp to services
if [ `grep -q 'ssh[ \t][ \t]*22' "${_services}"; echo $?` -ne 0 ]
then
  awk '{ if ( $2 ~ /^23\/tcp/ ) print "ssh                22/tcp                           #SSH Remote Login Protocol\nssh                22/udp                           #SSH Remote Login Protocol"; print $0; }' < "${_services}" > "${_serv_tmp}"
  if [ -f "${_serv_tmp}" ]
  then
    if mv "${_serv_tmp}" "${_services}"
    then
      echo "Added ssh to ${_services}"
    else
      echo "Adding ssh to ${_services} failed\!"
    fi
    rm -f "${_serv_tmp}"
  else
    echo "Adding ssh to ${_services} failed\!"
  fi
fi

umount "${_services}"
umount "${_serv_tmp}"

# Care for inetd.conf file
_inetcnf="/etc/inetd.conf"
_inetcnf_tmp="/etc/inetd.conf.$$"

if [ -f "${_inetcnf}" ]
then
  # Check if ssh service is already in use as sshd
  with_comment=1
  grep -q '^[ \t]*sshd' "${_inetcnf}" && with_comment=0
  # Remove sshd line from inetd.conf
  if [ `grep -q '^[# \t]*sshd' "${_inetcnf}"; echo $?` -eq 0 ]
  then
    grep -v '^[# \t]*sshd' "${_inetcnf}" >> "${_inetcnf_tmp}"
    if [ -f "${_inetcnf_tmp}" ]
    then
      if mv "${_inetcnf_tmp}" "${_inetcnf}"
      then
        echo "Removed sshd from ${_inetcnf}"
      else
        echo "Removing sshd from ${_inetcnf} failed\!"
      fi
      rm -f "${_inetcnf_tmp}"
    else
      echo "Removing sshd from ${_inetcnf} failed\!"
    fi
  fi

  # Add ssh line to inetd.conf
  if [ `grep -q '^[# \t]*ssh' "${_inetcnf}"; echo $?` -ne 0 ]
  then
    if [ "${with_comment}" -eq 0 ]
    then
      echo 'ssh  stream  tcp     nowait  root    /usr/sbin/sshd -i' >> "${_inetcnf}"
    else
      echo '# ssh  stream  tcp     nowait  root    /usr/sbin/sshd -i' >> "${_inetcnf}"
    fi
    echo "Added ssh to ${_inetcnf}"
  fi
fi

# Create /var/log and /var/log/lastlog if not already existing

if [ -f /var/log ]
then
  echo "Creating /var/log failed\!"
else
  if [ ! -d /var/log ]
  then
    mkdir /var/log
  fi
  if [ -d /var/log/lastlog ]
  then
    echo "Creating /var/log/lastlog failed\!"
  elif [ ! -f /var/log/lastlog ]
  then
    cat /dev/null > /var/log/lastlog
  fi
fi

# On NT ask if sshd should be installed as service
if [ $_nt -gt 0 ]
then
  echo
  echo "Do you want to install sshd as service?"
  if request "(Say \"no\" if it's already installed as service)"
  then
    echo
    echo "Which value should the environment variable CYGWIN have when"
    echo "sshd starts? It's recommended to set at least \"ntsec\" to be"
    echo "able to change user context without password."
    echo -n "Default is \"binmode ntsec tty\".  CYGWIN="
    read _cygwin
    [ -z "${_cygwin}" ] && _cygwin="binmode ntsec tty"
    if cygrunsrv -I sshd -d "CYGWIN sshd" -p /usr/sbin/sshd -a -D -e "CYGWIN=${_cygwin}"
    then
      chown system /etc/ssh*
      echo
      echo "The service has been installed under LocalSystem account."
    fi
  fi
fi

if [ "${old_install}" = "1" ]
then
  echo
  echo "Note: If you have used sshd as service or from inetd, don't forget to"
  echo "      change the path to sshd.exe in the service entry or in inetd.conf."
fi

echo
echo "Host configuration finished. Have fun!"