openssh (1:5.2p1-1) UNRELEASED; urgency=low * New upstream release (closes: #536182). Yes, I know 5.3p1 has been out for a while, but there's no GSSAPI patch available for it yet. - Change the default cipher order to prefer the AES CTR modes and the revised "arcfour256" mode to CBC mode ciphers that are susceptible to CPNI-957037 "Plaintext Recovery Attack Against SSH". - Add countermeasures to mitigate CPNI-957037-style attacks against the SSH protocol's use of CBC-mode ciphers. Upon detection of an invalid packet length or Message Authentication Code, ssh/sshd will continue reading up to the maximum supported packet length rather than immediately terminating the connection. This eliminates most of the known differences in behaviour that leaked information about the plaintext of injected data which formed the basis of this attack (closes: #506115, LP: #379329). - ForceCommand directive now accepts commandline arguments for the internal-sftp server (closes: #524423, LP: #362511). - Add AllowAgentForwarding to available Match keywords list (closes: #540623). - Make ssh(1) send the correct channel number for SSH2_MSG_CHANNEL_SUCCESS and SSH2_MSG_CHANNEL_FAILURE messages to avoid triggering 'Non-public channel' error messages on sshd(8) in openssh-5.1. - Avoid printing 'Non-public channel' warnings in sshd(8), since the ssh(1) has sent incorrect channel numbers since ~2004 (this reverts a behaviour introduced in openssh-5.1; closes: #496017). - Disable nonfunctional ssh(1) ~C escape handler in multiplex slave connections (closes: #507541). - Fix "whitepsace" typo in ssh_config(5) (closes: #514313, LP: #303835). * Update to GSSAPI patch from http://www.sxw.org.uk/computing/patches/openssh-5.2p1-gsskex-all-20090726.patch, including cascading credentials support (LP: #416958). * Use x11.pc when compiling/linking gnome-ssh-askpass2 (closes: #555951). * Moved to bzr.debian.org; add Vcs-Bzr and Vcs-Browser control fields. * Add debian/README.source with instructions on bzr handling. * Make ChrootDirectory work with SELinux (thanks, Russell Coker; closes: #556644). * Initialise sc to NULL in ssh_selinux_getctxbyname (thanks, Václav Ovsík; closes: #498684). * Don't duplicate backslashes when displaying server banner (thanks, Michał Górny; closes: #505378, LP: #425346). * Use hardening-includes for hardening logic (thanks, Kees Cook; closes: #561887). * Update OpenSSH FAQ to revision 1.110. * Remove ssh/new_config, only needed for direct upgrades from potato which are no longer particularly feasible anyway (closes: #420682). * Cope with insserv reordering of init script links. * Remove init script stop link in rc1, as killprocs handles it already. * Adjust short descriptions to avoid relying on previous experience with rsh, based on suggestions from Reuben Thomas (closes: #512198). * Remove manual page references to login.conf, which aren't applicable on non-BSD systems (closes: #154434). * Remove/adjust manual page references to BSD-specific /etc/rc (closes: #513417). * Refer to sshd_config(5) rather than sshd(8) in postinst-written /etc/ssh/sshd_config, and add UsePAM commentary from upstream-shipped configuration file (closes: #415008, although unfortunately this will only be conveniently visible on new installations). * Include URL to OpenBSD's ssl(8) in ssh(1) (closes: #530692). -- Colin Watson Thu, 12 Nov 2009 21:31:44 +0000 openssh (1:5.1p1-8) unstable; urgency=low * Build with just -fPIC on mips/mipsel, not -fPIE as well (thanks, LIU Qi; closes: #538313). * Build-depend on libselinux1-dev on sh4 too (thanks, Nobuhiro Iwamatsu; closes: #547103). * Fix grammar in if-up script (closes: #549128). * Pass $SSHD_OPTS when checking configuration too (thanks, "sobtwmxt"; closes: #548662). -- Colin Watson Mon, 05 Oct 2009 13:30:49 +0100 openssh (1:5.1p1-7) unstable; urgency=low * Update config.guess and config.sub from autotools-dev 20090611.1 (closes: #538301). * Set umask to 022 in the init script as well as postinsts (closes: #539030). * Add ${misc:Depends} to keep Lintian happy. * Use 'which' rather than 'type' in maintainer scripts. * Upgrade to debhelper v7. -- Colin Watson Fri, 31 Jul 2009 16:28:10 +0100 openssh (1:5.1p1-6) unstable; urgency=low * Open /proc/self/oom_adj with O_RDONLY or O_WRONLY as necessary, rather than O_RDWR. * Disable OOM adjustment for vserver/OpenVZ (thanks, Karl Chen; closes: #511771). * Add ufw integration (thanks, Didier Roche; see https://wiki.ubuntu.com/UbuntuFirewall#Integrating%20UFW%20with%20Packages; LP: #261884). * Add a comment above PermitRootLogin in sshd_config pointing to README.Debian. * Check if delgroup is present in openssh-client.postrm (closes: #530501). * Build with -fPIC on mips/mipsel (thanks, Luk Claes; closes: #531942). * Remove /var/run/sshd from openssh-server package; it will be created at run-time before starting the server. * Use invoke-rc.d in openssh-server's if-up script. -- Colin Watson Fri, 05 Jun 2009 11:56:03 +0100 openssh (1:5.1p1-5) unstable; urgency=low * Backport from upstream CVS (Markus Friedl): - packet_disconnect() on padding error, too. Should reduce the success probability for the CPNI-957037 Plaintext Recovery Attack to 2^-18. * Check that /var/run/sshd.pid exists and that the process ID listed there corresponds to sshd before running '/etc/init.d/ssh reload' from if-up script; SIGHUP is racy if called at boot before sshd has a chance to install its signal handler, but fortunately the pid file is written after that which lets us avoid the race (closes: #502444). * While the above is a valuable sanity-check, it turns out that it doesn't really fix the bug (thanks to Kevin Price for testing), so for the meantime we'll just use '/etc/init.d/ssh restart', even though it is unfortunately heavyweight. -- Colin Watson Wed, 14 Jan 2009 00:34:08 +0000 openssh (1:5.1p1-4) unstable; urgency=low * ssh-copy-id: Strip trailing colons from hostname (closes: #226172, LP: #249706; thanks to Karl Goetz for nudging this along; forwarded upstream as https://bugzilla.mindrot.org/show_bug.cgi?id=1530). * Backport from upstream CVS (Markus Friedl): - Only send eow and no-more-sessions requests to openssh 5 and newer; fixes interop problems with broken ssh v2 implementations (closes: #495917). * Fix double-free when failing to parse a forwarding specification given using ~C (closes: #505330; forwarded upstream as https://bugzilla.mindrot.org/show_bug.cgi?id=1539). -- Colin Watson Sun, 23 Nov 2008 14:46:10 +0000 openssh (1:5.1p1-3) unstable; urgency=low * Remove unnecessary ssh-vulnkey output in non-verbose mode when no compromised or unknown keys were found (closes: #496495). * Configure with --disable-strip; dh_strip will deal with stripping binaries and will honour DEB_BUILD_OPTIONS (thanks, Bernhard R. Link; closes: #498681). * Fix handling of zero-length server banners (thanks, Tomas Mraz; closes: #497026). -- Colin Watson Tue, 30 Sep 2008 23:09:58 +0100 openssh (1:5.1p1-2) unstable; urgency=low * Look for $SHELL on the path when executing ProxyCommands or LocalCommands (closes: #492728). -- Colin Watson Tue, 29 Jul 2008 15:31:25 +0100 openssh (1:5.1p1-1) unstable; urgency=low * New upstream release (closes: #474301). Important changes not previously backported to 4.7p1: - 4.9/4.9p1 (http://www.openssh.com/txt/release-4.9): + Added chroot(2) support for sshd(8), controlled by a new option "ChrootDirectory" (closes: #139047, LP: #24777). + Linked sftp-server(8) into sshd(8). The internal sftp server is used when the command "internal-sftp" is specified in a Subsystem or ForceCommand declaration. When used with ChrootDirectory, the internal sftp server requires no special configuration of files inside the chroot environment. + Added a protocol extension method "posix-rename@openssh.com" for sftp-server(8) to perform POSIX atomic rename() operations; sftp(1) prefers this if available (closes: #308561). + Removed the fixed limit of 100 file handles in sftp-server(8). + ssh(8) will now skip generation of SSH protocol 1 ephemeral server keys when in inetd mode and protocol 2 connections are negotiated. This speeds up protocol 2 connections to inetd-mode servers that also allow Protocol 1. + Accept the PermitRootLogin directive in a sshd_config(5) Match block. Allows for, e.g. permitting root only from the local network. + Reworked sftp(1) argument splitting and escaping to be more internally consistent (i.e. between sftp commands) and more consistent with sh(1). Please note that this will change the interpretation of some quoted strings, especially those with embedded backslash escape sequences. + Support "Banner=none" in sshd_config(5) to disable sending of a pre-login banner (e.g. in a Match block). + ssh(1) ProxyCommands are now executed with $SHELL rather than /bin/sh. + ssh(1)'s ConnectTimeout option is now applied to both the TCP connection and the SSH banner exchange (previously it just covered the TCP connection). This allows callers of ssh(1) to better detect and deal with stuck servers that accept a TCP connection but don't progress the protocol, and also makes ConnectTimeout useful for connections via a ProxyCommand. + scp(1) incorrectly reported "stalled" on slow copies (closes: #140828). + scp(1) date underflow for timestamps before epoch. + ssh(1) used the obsolete SIG DNS RRtype for host keys in DNS, instead of the current standard RRSIG. + Correctly drain ACKs when a sftp(1) upload write fails midway, avoids a fatal() exit from what should be a recoverable condition. + Fixed ssh-keygen(1) selective host key hashing (i.e. "ssh-keygen -HF hostname") to not include any IP address in the data to be hashed. + Make ssh(1) skip listening on the IPv6 wildcard address when a binding address of 0.0.0.0 is used against an old SSH server that does not support the RFC4254 syntax for wildcard bind addresses. + Enable IPV6_V6ONLY socket option on sshd(8) listen socket, as is already done for X11/TCP forwarding sockets (closes: #439661). + Fix FD leak that could hang a ssh(1) connection multiplexing master. + Make ssh(1) -q option documentation consistent with reality. + Fixed sshd(8) PAM support not calling pam_session_close(), or failing to call it with root privileges (closes: #372680). + Fix activation of OpenSSL engine support when requested in configure (LP: #119295). + Cache SELinux status earlier so we know if it's enabled after a chroot (LP: #237557). - 5.1/5.1p1 (http://www.openssh.com/txt/release-5.1): + Introduce experimental SSH Fingerprint ASCII Visualisation to ssh(1) and ssh-keygen(1). Visual fingerprint display is controlled by a new ssh_config(5) option "VisualHostKey". The intent is to render SSH host keys in a visual form that is amenable to easy recall and rejection of changed host keys. + sshd_config(5) now supports CIDR address/masklen matching in "Match address" blocks, with a fallback to classic wildcard matching. + sshd(8) now supports CIDR matching in ~/.ssh/authorized_keys from="..." restrictions, also with a fallback to classic wildcard matching. + Added an extended test mode (-T) to sshd(8) to request that it write its effective configuration to stdout and exit. Extended test mode also supports the specification of connection parameters (username, source address and hostname) to test the application of sshd_config(5) Match rules. + ssh(1) now prints the number of bytes transferred and the overall connection throughput for SSH protocol 2 sessions when in verbose mode (previously these statistics were displayed for protocol 1 connections only). + sftp-server(8) now supports extension methods statvfs@openssh.com and fstatvfs@openssh.com that implement statvfs(2)-like operations. + sftp(1) now has a "df" command to the sftp client that uses the statvfs@openssh.com to produce a df(1)-like display of filesystem space and inode utilisation (requires statvfs@openssh.com support on the server). + Added a MaxSessions option to sshd_config(5) to allow control of the number of multiplexed sessions supported over a single TCP connection. This allows increasing the number of allowed sessions above the previous default of 10, disabling connection multiplexing (MaxSessions=1) or disallowing login/shell/subsystem sessions entirely (MaxSessions=0). + Added a no-more-sessions@openssh.com global request extension that is sent from ssh(1) to sshd(8) when the client knows that it will never request another session (i.e. when session multiplexing is disabled). This allows a server to disallow further session requests and terminate the session in cases where the client has been hijacked. + ssh-keygen(1) now supports the use of the -l option in combination with -F to search for a host in ~/.ssh/known_hosts and display its fingerprint. + ssh-keyscan(1) now defaults to "rsa" (protocol 2) keys, instead of "rsa1" (LP: #129794). + Added an AllowAgentForwarding option to sshd_config(8) to control whether authentication agent forwarding is permitted. Note that this is a loose control, as a client may install their own unofficial forwarder. + ssh(1) and sshd(8): avoid unnecessary malloc/copy/free when receiving network data, resulting in a ~10% speedup. + ssh(1) and sshd(8) will now try additional addresses when connecting to a port forward destination whose DNS name resolves to more than one address. The previous behaviour was to try the only first address and give up if that failed. + ssh(1) and sshd(8) now support signalling that channels are half-closed for writing, through a channel protocol extension notification "eow@openssh.com". This allows propagation of closed file descriptors, so that commands such as "ssh -2 localhost od /bin/ls | true" do not send unnecessary data over the wire. + sshd(8): increased the default size of ssh protocol 1 ephemeral keys from 768 to 1024 bits. + When ssh(1) has been requested to fork after authentication ("ssh -f") with ExitOnForwardFailure enabled, delay the fork until after replies for any -R forwards have been seen. Allows for robust detection of -R forward failure when using -f. + "Match group" blocks in sshd_config(5) now support negation of groups. E.g. "Match group staff,!guests". + sftp(1) and sftp-server(8) now allow chmod-like operations to set set[ug]id/sticky bits. + The MaxAuthTries option is now permitted in sshd_config(5) match blocks. + Multiplexed ssh(1) sessions now support a subset of the ~ escapes that are available to a primary connection. + ssh(1) connection multiplexing will now fall back to creating a new connection in most error cases (closes: #352830). + Make ssh(1) deal more gracefully with channel requests that fail. Previously it would optimistically assume that requests would always succeed, which could cause hangs if they did not (e.g. when the server runs out of file descriptors). + ssh(1) now reports multiplexing errors via the multiplex slave's stderr where possible (subject to LogLevel in the mux master). + Fixed an UMAC alignment problem that manifested on Itanium platforms. * Remove our local version of moduli(5) now that there's one upstream. * Say "GTK+" rather than "GTK" in ssh-askpass-gnome's description. * Add lintian overrides for empty /usr/share/doc/openssh-client directories in openssh-server and ssh (necessary due to being symlink targets). * Merge from Ubuntu: - Add 'status' action to openssh-server init script, requiring lsb-base (>= 3.2-13) (thanks, Dustin Kirkland). * debconf template translations: - Update Korean (thanks, Sunjae Park; closes: #484821). -- Colin Watson Fri, 25 Jul 2008 10:45:08 +0100 openssh (1:4.7p1-13) unstable; urgency=low * Add some helpful advice to the end of ssh-vulnkey's output if there are unknown or compromised keys (thanks, Dan Jacobson; closes: #483756). * Check compromised key blacklist in ssh or ssh-add, as well as in the server (LP: #232391). To override the blacklist check in ssh temporarily, use 'ssh -o UseBlacklistedKeys=yes'; there is no override for the blacklist check in ssh-add. * Add cross-references to ssh-vulnkey(1) to ssh(1), ssh-add(1), ssh-keygen(1), and sshd(8) (closes: #484451). * Change openssh-client-udeb's Installer-Menu-Item from 99900 to 99999 (thanks, Frans Pop). * Drop openssh-client-udeb isinstallable hack, as main-menu (>= 1.26) now takes care of that (thanks, Frans Pop; closes: #484404). * Update DEB_BUILD_OPTIONS parsing code from policy 3.8.0. * Add documentation on removing openssh-blacklist locally (see #484269). * Clarify documentation of SSHD_OOM_ADJUST, and make setting it to the empty string actually skip adjustment as intended (closes: #487325). * Remove empty /usr/share/applications directory in ssh-askpass-gnome. * debconf template translations: - Update Romanian (thanks, Cătălin Feștilă; closes: #485415). -- Colin Watson Mon, 21 Jul 2008 12:18:28 +0100 openssh (1:4.7p1-12) unstable; urgency=low * Fill in CVE identifier for ssh-vulnkey bug fixed in 1:4.7p1-10. * Refactor rejection of blacklisted user keys into a single reject_blacklisted_key function in auth.c (thanks, Dmitry V. Levin). * Fix memory leak of blacklisted host keys (thanks, Dmitry V. Levin). * debconf template translations: - Update Dutch (thanks, Bart Cornelis; closes: #483004). - Update Brazilian Portuguese (thanks, Eder L. Marques; closes: #483142). - Update Slovak (thanks, Ivan Masár; closes: #483517). -- Colin Watson Thu, 29 May 2008 21:41:29 +0100 openssh (1:4.7p1-11) unstable; urgency=low * Make init script depend on $syslog, and fix some other dependency glitches (thanks, Petter Reinholdtsen; closes: #481018). * Remove 0 and 6 from Default-Stop in init script (thanks, Kel Modderman; closes: #481151). * Restore OOM killer adjustment for child processes (thanks, Vaclav Ovsik; closes: #480020). * Allow building with heimdal-dev (LP: #125805). * Check RSA1 keys without the need for a separate blacklist. Thanks to Simon Tatham for the idea. * Generate two keys with the PID forced to the same value and test that they differ, to defend against recurrences of the recent Debian OpenSSL vulnerability. * Recommend openssh-blacklist from openssh-client (closes: #481187). * Recommend openssh-blacklist-extra from openssh-client and openssh-server. * Make ssh-vulnkey report the file name and line number for each key (thanks, Heiko Schlittermann and Christopher Perry; closes: #481398). * Check for blacklists in /usr/share/ssh/ as well as /etc/ssh/ (see #481283). * Log IP addresses of hosts attempting to use blacklisted keys (closes: #481721). * Incorporate various ssh-vulnkey suggestions from Hugh Daniel: - Add -v (verbose) option, and don't print output for keys that have a blacklist file but that are not listed unless in verbose mode. - Move exit status documentation to a separate section. - Document key status descriptions. - Add key type to output. - Fix error output if ssh-vulnkey fails to read key files, with the exception of host keys unless -a was given. - In verbose mode, output the name of each file examined. * Handle leading IP addresses in ssh-vulnkey input (LP: #230497). * Fix various ssh-vulnkey problems pointed out by Solar Designer: - Fix some buffer handling inconsistencies. - Use xasprintf to build user key file names, avoiding truncation problems. - Drop to the user's UID when reading user keys with -a. - Use EUID rather than UID when run with no file names and without -a. - Reword "Unknown (no blacklist information)" to "Unknown (blacklist file not installed)". * Fix typo in ssh/vulnerable_host_keys message (thanks, Esko Arajärvi). * debconf template translations: - Update Finnish (thanks, Esko Arajärvi; closes: #481530). - Update French (thanks, Christian Perrier; closes: #481576). - Update Norwegian Bokmål (thanks, Bjørn Steensrud; closes: #481591). - Update Galician (thanks, Jacobo Tarrio; closes: #481596). - Update Japanese (thanks, Kenshi Muto; closes: #481621). - Update Czech (thanks, Miroslav Kure; closes: #481624). - Update German (thanks, Helge Kreutzmann; closes: #481676). - Update Portuguese (thanks, Ricardo Silva; closes: #481781). - Update Basque (thanks, Piarres Beobide; closes: #481836). - Update Bulgarian (thanks, Damyan Ivanov; closes: #481870). - Update Vietnamese (thanks, Clytie Siddall; closes: #481876). - Update Spanish (thanks, Javier Fernandez-Sanguino Peña; closes: #482341). - Update Turkish (thanks, Mert Dirik; closes: #482548). - Update Russian (thanks, Yuri Kozlov; closes: #482887). - Update Swedish (thanks, Martin Bagge; closes: #482464). - Update Italian (thanks, Luca Monducci; closes: #482808). -- Colin Watson Mon, 26 May 2008 12:21:39 +0100 openssh (1:4.7p1-10) unstable; urgency=low * Add a FILES section to ssh-vulnkey(1) (thanks, Hugh Daniel). * CVE-2008-2285: ssh-vulnkey handles options in authorized_keys (LP: #230029), and treats # as introducing a comment even if it is preceded by whitespace. -- Colin Watson Wed, 14 May 2008 12:35:05 +0100 openssh (1:4.7p1-9) unstable; urgency=critical * Fill in CVE identifier for security vulnerability fixed in 1:4.7p1-8. * Mitigate OpenSSL security vulnerability (CVE-2008-0166): - Add key blacklisting support. Keys listed in /etc/ssh/blacklist.TYPE-LENGTH will be rejected for authentication by sshd, unless "PermitBlacklistedKeys yes" is set in /etc/ssh/sshd_config. - Add a new program, ssh-vulnkey, which can be used to check keys against these blacklists. - Depend on openssh-blacklist. - Force dependencies on libssl0.9.8 / libcrypto0.9.8-udeb to at least 0.9.8g-9. - Automatically regenerate known-compromised host keys, with a critical-priority debconf note. (I regret that there was no time to gather translations.) -- Colin Watson Tue, 13 May 2008 12:33:38 +0100 openssh (1:4.7p1-8) unstable; urgency=high * Fill in CVE identifier for security vulnerability fixed in 1:4.7p1-5. * Rename KeepAlive to TCPKeepAlive in sshd_config, cleaning up from old configurations (LP: #211400). * Tweak scp's reporting of filenames in verbose mode to be a bit less confusing with spaces (thanks, Nicolas Valcárcel; LP: #89945). * Backport from 4.9p1: - CVE-2008-1657: Ignore ~/.ssh/rc if a sshd_config ForceCommand is specified. - Add no-user-rc authorized_keys option to disable execution of ~/.ssh/rc. * Backport from Simon Wilkinson's GSSAPI key exchange patch for 5.0p1: - Add code to actually implement GSSAPIStrictAcceptorCheck, which had somehow been omitted from a previous version of this patch (closes: #474246). -- Colin Watson Sun, 06 Apr 2008 12:34:19 +0100 openssh (1:4.7p1-7) unstable; urgency=low * Ignore errors writing to oom_adj (closes: #473573). -- Colin Watson Mon, 31 Mar 2008 16:24:44 +0100 openssh (1:4.7p1-6) unstable; urgency=low * Disable the Linux kernel's OOM-killer for the sshd parent; tweak SSHD_OOM_ADJUST in /etc/default/ssh to change this (closes: #341767). -- Colin Watson Sun, 30 Mar 2008 21:14:12 +0100 openssh (1:4.7p1-5) unstable; urgency=low * Recommends: xauth rather than Suggests: xbase-clients. * Document in ssh(1) that '-S none' disables connection sharing (closes: #471437). * Patch from Red Hat / Fedora: - CVE-2008-1483: Don't use X11 forwarding port which can't be bound on all address families, preventing hijacking of X11 forwarding by unprivileged users when both IPv4 and IPv6 are configured (closes: #463011). * Use printf rather than echo -en (a bashism) in openssh-server.config and openssh-server.preinst. * debconf template translations: - Update Finnish (thanks, Esko Arajärvi; closes: #468563). -- Colin Watson Sat, 22 Mar 2008 12:37:00 +0000 openssh (1:4.7p1-4) unstable; urgency=low [ Caleb Case ] * Fix configure detection of getseuserbyname and get_default_context_with_level (closes: #465614, LP: #188136). [ Colin Watson ] * Include the autogenerated debian/copyright in the source package. * Move /etc/pam.d/ssh to /etc/pam.d/sshd, allowing us to stop defining SSHD_PAM_SERVICE (closes: #255870). -- Colin Watson Wed, 13 Feb 2008 18:18:52 +0000 openssh (1:4.7p1-3) unstable; urgency=low * Improve grammar of ssh-askpass-gnome description. * Backport from upstream: - Use the correct packet maximum sizes for remote port and agent forwarding. Prevents the server from killing the connection if too much data is queued and an excessively large packet gets sent (https://bugzilla.mindrot.org/show_bug.cgi?id=1360). * Allow passing temporary daemon parameters on the init script's command line, e.g. '/etc/init.d/ssh start "-o PermitRootLogin=yes"' (thanks, Marc Haber; closes: #458547). -- Colin Watson Fri, 01 Feb 2008 21:59:59 +0000 openssh (1:4.7p1-2) unstable; urgency=low * Adjust many relative links in faq.html to point to http://www.openssh.org/ (thanks, Dan Jacobson; mentioned in #459807). * Pass --with-mantype=doc to configure rather than build-depending on groff (closes: #460121). * Add armel to architecture list for libselinux1-dev build-dependency (closes: #460136). * Drop source-compatibility with Debian 3.0: - Remove support for building with GNOME 1. This allows simplification of our GNOME build-dependencies (see #460136). - Remove hacks to support the old PAM configuration scheme. - Remove compatibility for building without po-debconf. * Build-depend on libgtk2.0-dev rather than libgnomeui-dev. As far as I can see, the GTK2 version of ssh-askpass-gnome has never required libgnomeui-dev. -- Colin Watson Fri, 11 Jan 2008 00:14:10 +0000 openssh (1:4.7p1-1) unstable; urgency=low * New upstream release (closes: #453367). - CVE-2007-4752: Prevent ssh(1) from using a trusted X11 cookie if creation of an untrusted cookie fails; found and fixed by Jan Pechanec (closes: #444738). - sshd(8) in new installations defaults to SSH Protocol 2 only. Existing installations are unchanged. - The SSH channel window size has been increased, and both ssh(1) sshd(8) now send window updates more aggressively. These improves performance on high-BDP (Bandwidth Delay Product) networks. - ssh(1) and sshd(8) now preserve MAC contexts between packets, which saves 2 hash calls per packet and results in 12-16% speedup for arcfour256/hmac-md5. - A new MAC algorithm has been added, UMAC-64 (RFC4418) as "umac-64@openssh.com". UMAC-64 has been measured to be approximately 20% faster than HMAC-MD5. - Failure to establish a ssh(1) TunnelForward is now treated as a fatal error when the ExitOnForwardFailure option is set. - ssh(1) returns a sensible exit status if the control master goes away without passing the full exit status. - When using a ProxyCommand in ssh(1), set the outgoing hostname with gethostname(2), allowing hostbased authentication to work. - Make scp(1) skip FIFOs rather than hanging (closes: #246774). - Encode non-printing characters in scp(1) filenames. These could cause copies to be aborted with a "protocol error". - Handle SIGINT in sshd(8) privilege separation child process to ensure that wtmp and lastlog records are correctly updated. - Report GSSAPI mechanism in errors, for libraries that support multiple mechanisms. - Improve documentation for ssh-add(1)'s -d option. - Rearrange and tidy GSSAPI code, removing server-only code being linked into the client. - Delay execution of ssh(1)'s LocalCommand until after all forwardings have been established. - In scp(1), do not truncate non-regular files. - Improve exit message from ControlMaster clients. - Prevent sftp-server(8) from reading until it runs out of buffer space, whereupon it would exit with a fatal error (closes: #365541). - pam_end() was not being called if authentication failed (closes: #405041). - Manual page datestamps updated (closes: #433181). * Install the OpenSSH FAQ in /usr/share/doc/openssh-client. - Includes documentation on copying files with colons using scp (closes: #303453). * Create /var/run/sshd on start even if /etc/ssh/sshd_not_to_be_run exists (closes: #453285). * Fix "overriden" typo in ssh(1) (thanks, A. Costa; closes: #390699). * Refactor debian/rules configure and make invocations to make development easier. * Remove the hideously old /etc/ssh/primes on upgrade (closes: #123013). * Update moduli(5) to revision 1.11 from OpenBSD CVS. * Document the non-default options we set as standard in ssh_config(5) and sshd_config(5) (closes: #327886, #345628). * Recode LICENCE to UTF-8 when concatenating it to debian/copyright. * Override desktop-file-but-no-dh_desktop-call lintian warning; the .desktop file is intentionally not installed (see 1:3.8.1p1-10). * Update copyright dates for Kerberos patch in debian/copyright.head. * Policy version 3.7.3: no changes required. -- Colin Watson Mon, 24 Dec 2007 16:43:02 +0000 openssh (1:4.6p1-7) unstable; urgency=low * Don't build PIE executables on m68k (closes: #451192). * Use autotools-dev's recommended configure --build and --host options. * Adjust README.Debian to suggest mailing debian-ssh@lists.debian.org rather than Matthew. * Check whether deluser exists in postrm (closes: #454085). -- Colin Watson Mon, 03 Dec 2007 11:11:02 +0000 openssh (1:4.6p1-6) unstable; urgency=low * Remove blank line between head comment and first template in debian/openssh-server.templates.master; apparently it confuses some versions of debconf. * Install authorized_keys(5) as a symlink to sshd(8) (thanks, Tomas Pospisek; closes: #441817). * Discard error output from dpkg-query in preinsts, in case the ssh metapackage is not installed. * Fix sshd/inittab advice in README.Debian to account for rc.d movement (closes: #450632). * Suppress error from debian/rules if lsb-release is not installed. * Don't ignore errors from 'make -C contrib clean'. * Adjust categories in ssh-askpass-gnome.desktop to comply with the Desktop Menu Specification. * debconf template translations: - Add Slovak (thanks, Ivan Masár; closes: #441690). - Update Brazilian Portuguese (thanks, Eder L. Marques; closes: #447145). -- Colin Watson Mon, 12 Nov 2007 11:47:28 +0000 openssh (1:4.6p1-5) unstable; urgency=low * Identify ssh as a metapackage rather than a transitional package. It's still useful as a quick way to install both the client and the server. * ssh-copy-id now checks the exit status of ssh-add -L (thanks, Adeodato Simó; closes: #221675). * ssh-copy-id no longer prints the output of expr (thanks, Peter Eisentraut; closes: #291534). * ssh-copy-id defaults to ~/.ssh/id_rsa.pub rather than ~/.ssh/identity.pub, in line with ssh-keygen (thanks, Greg Norris; closes: #234627). * Build-depend on libselinux1-dev on lpia. * openssh-client Suggests: keychain. * debconf template translations: - Update Catalan (thanks, Jordà Polo; closes: #431970). -- Colin Watson Mon, 30 Jul 2007 09:34:38 +0100 openssh (1:4.6p1-4) unstable; urgency=low * Don't build PIE executables on hppa, as they crash. -- Colin Watson Thu, 05 Jul 2007 11:06:54 +0100 openssh (1:4.6p1-3) unstable; urgency=low * Only build PIE executables on Linux and NetBSD (closes: #430455). * Fix broken switch fallthrough when SELinux is running in permissive mode (closes: #430838). * Document that HashKnownHosts may break tab-completion (closes: #430154). -- Colin Watson Fri, 29 Jun 2007 07:15:38 +0100 openssh (1:4.6p1-2) unstable; urgency=low * Fix ordering of SYSLOG_LEVEL_QUIET and SYSLOG_LEVEL_FATAL. * Clarify that 'ssh -q -q' still prints errors caused by bad arguments (i.e. before the logging system is initialised). * Suppress "Connection to closed" and "Connection to master closed" messages at loglevel SILENT (thanks, Jaap Eldering; closes: #409788). * Suppress "Pseudo-terminal will not be allocated because stdin is not a terminal" message at loglevels QUIET and SILENT (closes: #366814). * Document the SILENT loglevel in sftp-server(8), ssh_config(5), and sshd_config(5). * Add try-restart action to init script. * Add /etc/network/if-up.d/openssh-server to restart sshd when new interfaces appear (LP: #103436). * Backport from upstream: - Move C/R -> kbdint special case to after the defaults have been loaded, which makes ChallengeResponse default to yes again. This was broken by the Match changes and not fixed properly subsequently (closes: #428968). - Silence spurious error messages from hang-on-exit fix (http://bugzilla.mindrot.org/show_bug.cgi?id=1306, closes: #429531). -- Colin Watson Wed, 20 Jun 2007 11:52:44 +0100 openssh (1:4.6p1-1) unstable; urgency=low * New upstream release (closes: #395507, #397961, #420035). Important changes not previously backported to 4.3p2: - 4.4/4.4p1 (http://www.openssh.org/txt/release-4.4): + On portable OpenSSH, fix a GSSAPI authentication abort that could be used to determine the validity of usernames on some platforms. + Implemented conditional configuration in sshd_config(5) using the "Match" directive. This allows some configuration options to be selectively overridden if specific criteria (based on user, group, hostname and/or address) are met. So far a useful subset of post-authentication options are supported and more are expected to be added in future releases. + Add support for Diffie-Hellman group exchange key agreement with a final hash of SHA256. + Added a "ForceCommand" directive to sshd_config(5). Similar to the command="..." option accepted in ~/.ssh/authorized_keys, this forces the execution of the specified command regardless of what the user requested. This is very useful in conjunction with the new "Match" option. + Add a "PermitOpen" directive to sshd_config(5). This mirrors the permitopen="..." authorized_keys option, allowing fine-grained control over the port-forwardings that a user is allowed to establish. + Add optional logging of transactions to sftp-server(8). + ssh(1) will now record port numbers for hosts stored in ~/.ssh/known_hosts when a non-standard port has been requested (closes: #50612). + Add an "ExitOnForwardFailure" option to cause ssh(1) to exit (with a non-zero exit code) when requested port forwardings could not be established. + Extend sshd_config(5) "SubSystem" declarations to allow the specification of command-line arguments. + Replacement of all integer overflow susceptible invocations of malloc(3) and realloc(3) with overflow-checking equivalents. + Many manpage fixes and improvements. + Add optional support for OpenSSL hardware accelerators (engines), enabled using the --with-ssl-engine configure option. + Tokens in configuration files may be double-quoted in order to contain spaces (closes: #319639). + Move a debug() call out of a SIGCHLD handler, fixing a hang when the session exits very quickly (closes: #307890). + Fix some incorrect buffer allocation calculations (closes: #410599). + ssh-add doesn't ask for a passphrase if key file permissions are too liberal (closes: #103677). + Likewise, ssh doesn't ask either (closes: #99675). - 4.6/4.6p1 (http://www.openssh.org/txt/release-4.6): + sshd now allows the enabling and disabling of authentication methods on a per user, group, host and network basis via the Match directive in sshd_config. + Fixed an inconsistent check for a terminal when displaying scp progress meter (closes: #257524). + Fix "hang on exit" when background processes are running at the time of exit on a ttyful/login session (closes: #88337). * Update to current GSSAPI patch from http://www.sxw.org.uk/computing/patches/openssh-4.6p1-gsskex-20070312.patch; install ChangeLog.gssapi. * Build the .deb --with-ssl-engine (closes: #408027, LP: #119295). * Use LSB functions in init scripts, and add an LSB-style header (partly from Ubuntu and partly thanks to Christian Perrier; closes: #389038). * Move init script start links to S16, move rc1 stop link to K84, and remove rc0 and rc6 stop links altogether (the last part from Ubuntu; closes: #122188). * Emit a slightly more informative message from the init script if /dev/null has somehow become not a character device (closes: #369964). * Belatedly build-depend on zlib1g-dev (>= 1:1.2.3-1) (closes: #333447). * Merge from Ubuntu: - Build position-independent executables (only for debs, not for udebs) to take advantage of address space layout randomisation. - If building on Ubuntu, add /sbin, /usr/sbin, and /usr/local/sbin to the default path. * Use ${binary:Version} rather than ${Source-Version} in openssh-server -> openssh-client dependency. -- Colin Watson Wed, 13 Jun 2007 00:28:26 +0100 openssh (1:4.3p2-11) unstable; urgency=low * It's been four and a half years now since I took over as "temporary" maintainer, so the Maintainer field is getting a bit inaccurate. Set Maintainer to debian-ssh@lists.debian.org and leave Matthew and myself as Uploaders. * Use dpkg-query to fetch conffile md5sums rather than parsing /var/lib/dpkg/status directly. * openssh-client Suggests: libpam-ssh (closes: #427840). * Use 'start-stop-daemon --oknodo' so that openssh-server's init script exits successfully if sshd is already running (closes: #426858). * Apply results of debconf templates and package descriptions review by debian-l10n-english (closes: #420107, #420742). * debconf template translations: - Update Dutch (thanks, Machteld de Kok; closes: #419260). - Update Norwegian Bokmål (thanks, Bjørn Steensrud; closes: #420630). - Update Galician (thanks, Jacobo Tarrio; closes: #420635). - Update Spanish (thanks, Javier Fernández-Sanguino Peña; closes: #420651). - Update Swedish (thanks, Daniel Nylander; closes: #420663). - Add Bulgarian (thanks, Damyan Ivanov; closes: #420703). - Add Tamil (thanks, Tirumurti Vasudevan; closes: #420739). - Update German (thanks, Helge Kreutzmann; closes: #420743). - Update Japanese (thanks, Kenshi Muto; closes: #420946). - Add Basque (thanks, Piarres Beobide; closes: #421238). - Update Italian (thanks, Luca Monducci; closes: #421348). - Update Czech (thanks, Miroslav Kure; closes: #421484). - Update Romanian (thanks, Igor Stirbu; closes: #421760). - Update Russian (thanks, Yuriy Talakan' and Sergey Alyoshin; closes: #420862). - Update Dutch (thanks, Bart Cornelis; closes: #422767). - Update Portuguese (thanks, Ricardo Silva; closes: #423112). - Update French (thanks, Christian Perrier). - Add Korean (thanks, Sunjae Park; closes: #424008). - Update Vietnamese (thanks, Clytie Siddall; closes: #426991). -- Colin Watson Sun, 10 Jun 2007 08:59:42 +0100 openssh (1:4.3p2-10) unstable; urgency=low * Multiply openssh-client-udeb's Installer-Menu-Item by 100. * Increase MAX_SESSIONS to 64. -- Colin Watson Tue, 10 Apr 2007 19:17:20 +0100 openssh (1:4.3p2-9) unstable; urgency=high [ Russ Allbery ] * Fix GSSAPIKeyExchange configuration file handling logic in ssh-krb5 (closes: #404863). * Fix uncommenting of GSSAPI options by ssh-krb5 (closes: #407766). [ Colin Watson ] * debconf template translations: - Add Norwegian Bokmål (thanks, Bjørn Steensrud; closes: #412330). -- Colin Watson Mon, 5 Mar 2007 16:13:50 +0000 openssh (1:4.3p2-8) unstable; urgency=medium [ Vincent Untz ] * Give the ssh-askpass-gnome window a default icon; remove unnecessary icon extension from .desktop file (closes: https://launchpad.net/bugs/27152). [ Colin Watson ] * Drop versioning on ssh/ssh-krb5 Replaces, as otherwise it isn't sufficient to replace conffiles (closes: #402804). * Make GSSAPICleanupCreds a compatibility alias for GSSAPICleanupCredentials. Mark GSSUseSessionCCache and GSSAPIUseSessionCredCache as known-but-unsupported options, and migrate away from them on upgrade. * It turns out that the people who told me that removing a conffile in the preinst was sufficient to have dpkg replace it without prompting when moving a conffile between packages were very much mistaken. As far as I can tell, the only way to do this reliably is to write out the desired new text of the conffile in the preinst. This is gross, and requires shipping the text of all conffiles in the preinst too, but there's nothing for it. Fortunately this nonsense is only required for smooth upgrades from sarge. * debconf template translations: - Add Romanian (thanks, Stan Ioan-Eugen; closes: #403528). -- Colin Watson Sat, 23 Dec 2006 18:38:33 +0000 openssh (1:4.3p2-7) unstable; urgency=medium [ Colin Watson ] * Ignore errors from usermod when changing sshd's shell, since it will fail if the sshd user is not local (closes: #398436). * Remove version control tags from /etc/ssh/moduli and /etc/ssh/ssh_config to avoid unnecessary conffile resolution steps for administrators (thanks, Jari Aalto; closes: #335259). * Fix quoting error in configure.ac and regenerate configure (thanks, Ben Pfaff; closes: #391248). * When installing openssh-client or openssh-server from scratch, remove any unchanged conffiles from the pre-split ssh package to work around a bug in sarge's dpkg (thanks, Justin Pryzby and others; closes: #335276). [ Russ Allbery ] * Create transitional ssh-krb5 package which enables GSSAPI configuration in sshd_config (closes: #390986). * Default client to attempting GSSAPI authentication. * Remove obsolete GSSAPINoMICAuthentication from sshd_config if it's found. * Add ssh -K option, the converse of -k, to enable GSSAPI credential delegation (closes: #401483). -- Colin Watson Wed, 6 Dec 2006 23:00:49 +0000 openssh (1:4.3p2-6) unstable; urgency=low * Acknowledge NMU (thanks, Manoj; closes: #394795). * Backport from 4.5p1: - Fix a bug in the sshd privilege separation monitor that weakened its verification of successful authentication. This bug is not known to be exploitable in the absence of additional vulnerabilities. * openssh-server Suggests: molly-guard (closes: #395473). * debconf template translations: - Update German (thanks, Helge Kreutzmann; closes: #395947). -- Colin Watson Wed, 15 Nov 2006 00:07:32 +0000 openssh (1:4.3p2-5.1) unstable; urgency=low * NMU to update SELinux patch, bringing it in line with current selinux releases. The patch for this NMU is simply the Bug#394795 patch, and no other changes. (closes: #394795) -- Manoj Srivastava Mon, 23 Oct 2006 14:11:24 -0500 openssh (1:4.3p2-5) unstable; urgency=low * Remove ssh/insecure_telnetd check altogether (closes: #391081). * debconf template translations: - Update Danish (thanks, Claus Hindsgaul; closes: #390612). -- Colin Watson Thu, 5 Oct 2006 09:04:19 +0100 openssh (1:4.3p2-4) unstable; urgency=high * Backport from 4.4p1 (since I don't have an updated version of the GSSAPI patch yet): - CVE-2006-4924: Fix a pre-authentication denial of service found by Tavis Ormandy, that would cause sshd(8) to spin until the login grace time expired (closes: #389995). - CVE-2006-5051: Fix an unsafe signal hander reported by Mark Dowd. The signal handler was vulnerable to a race condition that could be exploited to perform a pre-authentication denial of service. On portable OpenSSH, this vulnerability could theoretically lead to pre-authentication remote code execution if GSSAPI authentication is enabled, but the likelihood of successful exploitation appears remote. * Read /etc/default/locale as well as /etc/environment (thanks, Raphaël Hertzog; closes: #369395). * Remove no-longer-used ssh/insecure_rshd debconf template. * Make ssh/insecure_telnetd Type: error (closes: #388946). * debconf template translations: - Update Portuguese (thanks, Rui Branco; closes: #381942). - Update Spanish (thanks, Javier Fernández-Sanguino Peña; closes: #382966). -- Colin Watson Fri, 29 Sep 2006 16:28:24 +0100 openssh (1:4.3p2-3) unstable; urgency=low * Document KeepAlive->TCPKeepAlive renaming in sshd_config(5) (closes: https://launchpad.net/bugs/50702). * Change sshd user's shell to /usr/sbin/nologin (closes: #366541). Introduces dependency on passwd for usermod. * debconf template translations: - Update French (thanks, Denis Barbier; closes: #368503). - Update Dutch (thanks, Bart Cornelis; closes: #375100). - Update Japanese (thanks, Kenshi Muto; closes: #379950). -- Colin Watson Thu, 27 Jul 2006 00:12:36 +0100 openssh (1:4.3p2-2) unstable; urgency=low * Include commented-out pam_access example in /etc/pam.d/ssh. * On '/etc/init.d/ssh restart', create /var/run/sshd before checking the server configuration, as otherwise 'sshd -t' will complain about the lack of /var/run/sshd (closes: https://launchpad.net/bugs/45234). * debconf template translations: - Update Russian (thanks, Yuriy Talakan'; closes: #367143). - Update Czech (thanks, Miroslav Kure; closes: #367161). - Update Italian (thanks, Luca Monducci; closes: #367186). - Update Galician (thanks, Jacobo Tarrio; closes: #367318). - Update Swedish (thanks, Daniel Nylander; closes: #367971). -- Colin Watson Fri, 19 May 2006 09:14:27 +0100 openssh (1:4.3p2-1) unstable; urgency=low * New upstream release (closes: #361032). - CVE-2006-0225: scp (as does rcp, on which it is based) invoked a subshell to perform local to local, and remote to remote copy operations. This subshell exposed filenames to shell expansion twice; allowing a local attacker to create filenames containing shell metacharacters that, if matched by a wildcard, could lead to execution of attacker-specified commands with the privilege of the user running scp (closes: #349645). - Add support for tunneling arbitrary network packets over a connection between an OpenSSH client and server via tun(4) virtual network interfaces. This allows the use of OpenSSH (4.3+) to create a true VPN between the client and server providing real network connectivity at layer 2 or 3. This feature is experimental. - Reduce default key length for new DSA keys generated by ssh-keygen back to 1024 bits. DSA is not specified for longer lengths and does not fully benefit from simply making keys longer. As per FIPS 186-2 Change Notice 1, ssh-keygen will refuse to generate a new DSA key smaller or larger than 1024 bits. - Fixed X forwarding failing to start when the X11 client is executed in background at the time of session exit. - Change ssh-keygen to generate a protocol 2 RSA key when invoked without arguments (closes: #114894). - Fix timing variance for valid vs. invalid accounts when attempting Kerberos authentication. - Ensure that ssh always returns code 255 on internal error (closes: #259865). - Cleanup wtmp files on SIGTERM when not using privsep. - Set SO_REUSEADDR on X11 listeners to avoid problems caused by lingering sockets from previous session (X11 applications can sometimes not connect to 127.0.0.1:60xx) (closes: https://launchpad.net/bugs/25528). - Ensure that fds 0, 1 and 2 are always attached in all programs, by duping /dev/null to them if necessary. - Xauth list invocation had bogus "." argument. - Remove internal assumptions on key exchange hash algorithm and output length, preparing OpenSSH for KEX methods with alternate hashes. - Ignore junk sent by a server before it sends the "SSH-" banner. - Many manual page improvements. - Lots of cleanups, including fixes to memory leaks on error paths and possible crashes. * Update to current GSSAPI patch from http://www.sxw.org.uk/computing/patches/openssh-4.3p2-gsskex-20060223.patch (closes: #352042). * debian/rules: Resynchronise CFLAGS with that generated by configure. * Restore pam_nologin to /etc/pam.d/ssh; sshd no longer checks this itself when PAM is enabled, but relies on PAM to do it. * Rename KeepAlive to TCPKeepAlive in default sshd_config (closes: #349896). * Rephrase ssh/new_config and ssh/encrypted_host_key_but_no_keygen debconf templates to make boolean short descriptions end with a question mark and to avoid use of the first person. * Ship README.tun. * Policy version 3.7.2: no changes required. * debconf template translations: - Update Italian (thanks, Luca Monducci; closes: #360348). - Add Galician (thanks, Jacobo Tarrio; closes: #361220). -- Colin Watson Fri, 12 May 2006 12:48:24 +0100 openssh (1:4.2p1-8) unstable; urgency=low [ Frans Pop ] * Use udeb support introduced in debhelper 4.2.0 (available in sarge) rather than constructing udebs by steam. * Require debhelper 5.0.22, which generates correct shared library dependencies for udebs (closes: #360068). This build-dependency can be ignored if building on sarge. [ Colin Watson ] * Switch to debhelper compatibility level 4, since we now require debhelper 4 even on sarge anyway for udeb support. -- Colin Watson Fri, 31 Mar 2006 09:44:55 +0100 openssh (1:4.2p1-7) unstable; urgency=low * I accidentally applied the default $PATH change in 1:4.2p1-6 to the udeb rather than the deb. Fixed. -- Colin Watson Wed, 1 Mar 2006 16:19:00 +0000 openssh (1:4.2p1-6) unstable; urgency=low * Sync default values of $PATH from shadow 1:4.0.12-6, adding /usr/bin/X11 to the normal and superuser paths and /usr/games to the normal path. * When the client receives a signal, don't fatal() with "Killed by signal %d." (which produces unhelpful noise on stderr and causes confusion for users of some applications that wrap ssh); instead, generate a debug message and exit with the traditional status (closes: #313371). * debconf template translations: - Add Swedish (thanks, Daniel Nylander; closes: #333133). - Update Spanish (thanks, Javier Fernández-Sanguino Peña; closes: #341371). - Correct erroneously-changed Last-Translator headers in Greek and Spanish translations. -- Colin Watson Mon, 20 Feb 2006 16:50:55 +0000 openssh (1:4.2p1-5) unstable; urgency=low * Add a CVE name to the 1:4.0p1-1 changelog entry. * Build-depend on libselinux1-dev on armeb. * Only send GSSAPI proposal if GSSAPIAuthentication is enabled. * Build-depend on libssl-dev (>= 0.9.8-1) to cope with surprise OpenSSL transition, since otherwise who knows what the buildds will do. If you're building openssh yourself, you can safely ignore this and use an older libssl-dev. -- Colin Watson Fri, 7 Oct 2005 12:23:42 +0100 openssh (1:4.2p1-4) unstable; urgency=low * Initialise token to GSS_C_EMPTY_BUFFER in ssh_gssapi_check_mechanism (closes: #328606). -- Colin Watson Fri, 16 Sep 2005 12:50:16 +0100 openssh (1:4.2p1-3) unstable; urgency=low * Add prototype for ssh_gssapi_server_mechanisms (closes: #328372). * Interoperate with ssh-krb5 << 3.8.1p1-1 servers, which used a slightly different version of the gssapi authentication method (thanks, Aaron M. Ucko; closes: #328388). * Explicitly tell po2debconf to use the 'popular' output encoding, so that the woody-compatibility hack works even with po-debconf 0.9.0. -- Colin Watson Thu, 15 Sep 2005 09:28:21 +0100 openssh (1:4.2p1-2) unstable; urgency=low * Annotate 1:4.2p1-1 changelog with CVE references. * Add remaining pieces of Kerberos support (closes: #152657, #275472): - Add GSSAPI key exchange support from http://www.sxw.org.uk/computing/patches/openssh.html (thanks, Stephen Frost). - Build-depend on libkrb5-dev and configure --with-kerberos5=/usr. - openssh-client and openssh-server replace ssh-krb5. - Update commented-out Kerberos/GSSAPI options in default sshd_config. - Fix HAVE_GSSAPI_KRB5_H/HAVE_GSSAPI_GSSAPI_KRB5_H typos in gss-serv-krb5.c. -- Colin Watson Wed, 14 Sep 2005 18:28:49 +0100 openssh (1:4.2p1-1) unstable; urgency=low * New upstream release. - SECURITY (CAN-2005-2797): Fix a bug introduced in OpenSSH 4.0 that caused GatewayPorts to be incorrectly activated for dynamic ("-D") port forwardings when no listen address was explicitly specified (closes: #326065). - SECURITY (CAN-2005-2798): Fix improper delegation of GSSAPI credentials. This code is only built in openssh-krb5, not openssh, but I mention the CVE reference here anyway for completeness. - Add a new compression method ("Compression delayed") that delays zlib compression until after authentication, eliminating the risk of zlib vulnerabilities being exploited by unauthenticated users. Note that users of OpenSSH versions earlier than 3.5 will need to disable compression on the client or set "Compression yes" (losing this security benefit) on the server. - Increase the default size of new RSA/DSA keys generated by ssh-keygen from 1024 to 2048 bits (closes: #181162). - Many bugfixes and improvements to connection multiplexing. - Don't pretend to accept $HOME (closes: #208648). * debian/rules: Resynchronise CFLAGS with that generated by configure. * openssh-client and openssh-server conflict with pre-split ssh to avoid problems when ssh is left un-upgraded (closes: #324695). * Set X11Forwarding to yes in the default sshd_config (new installs only). At least when X11UseLocalhost is turned on, which is the default, the security risks of using X11 forwarding are risks to the client, not to the server (closes: #320104). -- Colin Watson Wed, 14 Sep 2005 15:16:14 +0100 openssh (1:4.1p1-7) unstable; urgency=low * Do the IDEA host key check on a temporary file to avoid altering /etc/ssh/ssh_host_key itself (closes: #312312). * Work around the ssh-askpass alternative somehow ending up in manual mode pointing to the obsolete /usr/lib/ssh/gnome-ssh-askpass. * Add GNU/kFreeBSD support (thanks, Aurelien Jarno; closes: #318113). * Fix XSIish uses of 'test' in openssh-server.preinst. * Policy version 3.6.2: no changes required. -- Colin Watson Fri, 2 Sep 2005 16:18:11 +0100 openssh (1:4.1p1-6) unstable; urgency=low * Fix one-character typo that meant the binaries in openssh-client and openssh-server got recompiled with the wrong options during 'debian/rules install' (closes: #317088, #317238, #317241). -- Colin Watson Thu, 7 Jul 2005 10:56:16 +0100 openssh (1:4.1p1-5) unstable; urgency=low * Build-depend on libselinux1-dev on ppc64 too (closes: #314625). * Drop priority of ssh to extra to match the override file. * Make /usr/share/doc/openssh-server and /usr/share/doc/ssh symlinks to /usr/share/doc/openssh-client (closes: #314745). * Ship README.dns (closes: #284874). * Disable btmp logging, since Debian's /var/log/btmp has inappropriate permissions (closes: #314956). * Allow ~/.ssh/config to be group-writable, provided that the group in question contains only the file's owner (closes: #314347). * debconf template translations: - Update Brazilian Portuguese (thanks, André Luís Lopes; closes: #315477). - Add Vietnamese (thanks, Clytie Siddall; closes: #316636). -- Colin Watson Sun, 3 Jul 2005 17:08:08 +0100 openssh (1:4.1p1-4) unstable; urgency=low * openssh-client and openssh-server conflict with ssh-krb5, as ssh-krb5 only conflicts with ssh (closes: #312475). * SELinux support (thanks, Manoj Srivastava; closes: #308555): - Added SELinux capability, and turned it on be default. Added restorecon calls in preinst and postinst (should not matter if the machine is not SELinux aware). By and large, the changes made should have no effect unless the rules file calls --with-selinux; and even then there should be no performance hit for machines not actively running SELinux. - Modified the preinst and postinst to call restorecon to set the security context for the generated public key files. - Added a comment to /etc/pam.d/ssh to indicate that an SELinux system may want to also include pam_selinux.so. * Re-enable ssh-askpass-gnome on the Hurd, now that its build-dependencies are available. * Restore /usr/lib/sftp-server temporarily, as a symlink to /usr/lib/openssh/sftp-server (closes: #312891). * Switch to debhelper compatibility level 3, since 2 is deprecated. * debconf template translations: - Update German (thanks, Jens Seidel; closes: #313949). -- Colin Watson Fri, 17 Jun 2005 14:20:20 +0100 openssh (1:4.1p1-3) unstable; urgency=low * Upload to unstable. -- Colin Watson Mon, 6 Jun 2005 22:28:33 +0100 openssh (1:4.1p1-2) experimental; urgency=low * Drop debconf support for allowing SSH protocol 1, which is discouraged and has not been the default since openssh 1:3.0.1p1-1. Users who need this should edit sshd_config instead (closes: #147212). * Since ssh-keysign isn't used by default (you need to set EnableSSHKeysign to "yes" in /etc/ssh/ssh_config), having a debconf question to ask whether it should be setuid is overkill, and the question text had got out of date anyway. Remove this question, ship ssh-keysign setuid in openssh-client.deb, and set a statoverride if the debconf question was previously set to false. * Add lintian overrides for the above (setuid-binary, no-debconf-templates). * Fix picky lintian errors about slogin symlinks. * Fix DEB_HOST_ARCH_OS/DEB_HOST_GNU_SYSTEM compatibility handling. * Apply Linux 2.2 workaround (see #239999) only on Linux. -- Colin Watson Thu, 2 Jun 2005 00:55:58 +0100 openssh (1:4.1p1-1) experimental; urgency=low * New upstream release. - Normalise socket addresses returned by get_remote_hostname(), fixing 4-in-6 mapping issues with AllowUsers et al (closes: #192234). * Take upstream's hint and disable the unsupported USE_POSIX_THREADS (closes: #295757, #308868, and possibly others; may open other bugs). Use PAM password authentication to avoid #278394. In future I may provide two sets of binaries built with and without this option, since it seems I can't win. * Disable ChallengeResponseAuthentication in new installations, returning to PasswordAuthentication by default, since it now supports PAM and apparently works better with a non-threaded sshd (closes: #247521). * openssh-server Suggests: rssh (closes: #233012). * Change libexecdir to /usr/lib/openssh, and fix up various alternatives and configuration files to match (closes: #87900, #151321). * Fix up very old sshd_config files that refer to /usr/libexec/sftp-server (closes: #141979). -- Colin Watson Tue, 31 May 2005 01:33:33 +0100 openssh (1:4.0p1-1) experimental; urgency=low * New upstream release. - Port-forwarding specifications now take optional bind addresses, and the server allows client-specified bind addresses for remote port forwardings when configured with "GatewayPorts clientspecified" (closes: #87253, #192206). - ssh and ssh-keyscan now support hashing of known_hosts files for improved privacy (CAN-2005-2666). ssh-keygen has new options for managing known_hosts files, which understand hashing. - sftp supports command history and editing support using libedit (closes: #287013). - Have scp and sftp wait for the spawned ssh to exit before they exit themselves, allowing ssh to restore terminal modes (closes: #257130). - Improved the handling of bad data in authorized_keys files, eliminating fatal errors on corrupt or very large keys; e.g. linefeeds in keys only produce errors in auth.log now (closes: #220726). - Add "command mode" to ssh connection multiplexing (closes: #303452). - Mention $HOME/.hushlogin in sshd(8) FILES section (closes: #163933). * Make gnome-ssh-askpass stay above other windows (thanks, Liyang HU; closes: #296487). * Remove obsolete and unnecessary ssh/forward_warning debconf note. * Hurd build fixes (although sshd still doesn't work): - Restore X forwarding fix from #102991, lost somewhere along the way. - Link with -lcrypt. - Link with -lpthread rather than -pthread. - Don't build ssh-askpass-gnome on the Hurd, until GNOME is available to satisfy build-dependencies. * Drop workaround for #242462 on amd64; it's been fixed properly upstream. * Enable HashKnownHosts by default. This only affects new entries; use 'ssh-keygen -H' to convert an entire known_hosts file to hashed format. * Note in ssh_config(5) that the SetupTimeOut option is Debian-specific (closes: #307069). * debconf template translations: - Update Czech (thanks, Miroslav Kure; closes: #298744). - Update Finnish (thanks, Matti Pöllä; closes: #303787). - Synchronise Spanish with sarge branch (thanks, Javier Fernández-Sanguino Peña; closes: #298536). - Add Ukrainian (thanks, Eugeniy Meshcheryakov; closes: #301852). -- Colin Watson Thu, 26 May 2005 11:23:18 +0100 openssh (1:3.9p1-3) experimental; urgency=low * Explain how to run sshd from inittab in README.Debian (closes: #147360). * Add debian/watch file. -- Colin Watson Fri, 18 Feb 2005 00:20:16 +0000 openssh (1:3.9p1-2) experimental; urgency=low * Remove pam_nologin from /etc/pam.d/ssh, as sshd's built-in support appears to be sufficient and more useful (closes: #162996). * Depend on debconf | debconf-2.0. * Drop LoginGraceTime back to the upstream default of two minutes on new installs (closes: #289573). * debconf template translations from Ubuntu bug #1232: - Update Greek (thanks, Logiotatidis George). - Update Spanish (thanks, Santiago Erquicia). -- Colin Watson Sat, 15 Jan 2005 12:37:54 +0000 openssh (1:3.9p1-1) experimental; urgency=low * New upstream release. - PAM password authentication implemented again (closes: #238699, #242119). - Implemented the ability to pass selected environment variables between the client and the server. - Fix ssh-keyscan breakage when remote server doesn't speak SSH protocol (closes: #228828). - Fix res_query detection (closes: #242462). - 'ssh -c' documentation improved (closes: #265627). * Pass LANG and LC_* environment variables from the client by default, and accept them to the server by default in new installs, although not on upgrade (closes: #264024). * Build ssh in binary-indep, not binary-arch (thanks, LaMont Jones). * Expand on openssh-client package description (closes: #273831). -- Colin Watson Tue, 4 Jan 2005 14:18:31 +0000 openssh (1:3.8.1p1-14) experimental; urgency=low * We use DH_COMPAT=2, so build-depend on debhelper (>= 2). * Fix timing information leak allowing discovery of invalid usernames in PAM keyboard-interactive authentication (backported from a patch by Darren Tucker; closes: #281595). * Make sure that there's a delay in PAM keyboard-interactive authentication when PermitRootLogin is not set to yes and the correct root password is entered (closes: #248747). -- Colin Watson Sun, 28 Nov 2004 18:09:37 +0000 openssh (1:3.8.1p1-13) experimental; urgency=low * Enable threading for PAM, on Sam Hartman's advice (closes: #278394). * debconf template translations: - Update Dutch (thanks, cobaco; closes: #278715). * Correct README.Debian's ForwardX11Trusted description (closes: #280190). -- Colin Watson Fri, 12 Nov 2004 12:03:13 +0000 openssh (1:3.8.1p1-12) experimental; urgency=low * Preserve /etc/ssh/sshd_config ownership/permissions (closes: #276754). * Shorten the version string from the form "OpenSSH_3.8.1p1 Debian 1:3.8.1p1-8.sarge.1" to "OpenSSH_3.8.1p1 Debian-8.sarge.1", as some SSH implementations apparently have problems with the long version string. This is of course a bug in those implementations, but since the extent of the problem is unknown it's best to play safe (closes: #275731). * debconf template translations: - Add Finnish (thanks, Matti Pöllä; closes: #265339). - Update Danish (thanks, Morten Brix Pedersen; closes: #275895). - Update French (thanks, Denis Barbier; closes: #276703). - Update Japanese (thanks, Kenshi Muto; closes: #277438). -- Colin Watson Sun, 24 Oct 2004 19:21:17 +0100 openssh (1:3.8.1p1-11) experimental; urgency=high * Move sshd_config(5) to openssh-server, where it belongs. * If PasswordAuthentication is disabled, then offer to disable ChallengeResponseAuthentication too. The current PAM code will attempt password-style authentication if ChallengeResponseAuthentication is enabled (closes: #250369). * This will ask a question of anyone who installed fresh with 1:3.8p1-2 or later and then upgraded. Sorry about that ... for this reason, the default answer is to leave ChallengeResponseAuthentication enabled. -- Colin Watson Wed, 6 Oct 2004 14:28:20 +0100 openssh (1:3.8.1p1-10) experimental; urgency=low * Don't install the ssh-askpass-gnome .desktop file by default; I've had too many GNOME people tell me it's the wrong thing to be doing. I've left it in /usr/share/doc/ssh-askpass-gnome/examples/ for now. -- Colin Watson Wed, 25 Aug 2004 18:18:14 +0100 openssh (1:3.8.1p1-9) experimental; urgency=low * Split the ssh binary package into openssh-client and openssh-server (closes: #39741). openssh-server depends on openssh-client for some common functionality; it didn't seem worth creating yet another package for this. openssh-client is priority standard, openssh-server optional. * New transitional ssh package, priority optional, depending on openssh-client and openssh-server. May be removed once nothing depends on it. * When upgrading from ssh to openssh-{client,server}, it's very difficult for the maintainer scripts to find out what version we're upgrading from without dodgy dpkg hackery. I've therefore taken the opportunity to move a couple of debconf notes into NEWS files, namely ssh/ssh2_keys_merged and ssh/user_environment_tell. * Add a heuristic to try to make sure the sshd_config upgrade to >= 3.7 happens even though we don't know what version we're upgrading from. * Remove /etc/ssh/sshd_not_to_be_run on purge of openssh-server. For now (until sarge+2) it's still honoured to avoid breaking existing configurations, but the right approach is now to remove the openssh-server package if you don't want to run the server. Add a NEWS item to that effect. -- Colin Watson Mon, 2 Aug 2004 20:48:54 +0100 openssh (1:3.8.1p1-8.sarge.4) unstable; urgency=high * Fix timing information leak allowing discovery of invalid usernames in PAM keyboard-interactive authentication (backported from a patch by Darren Tucker; closes: #281595). * Make sure that there's a delay in PAM keyboard-interactive authentication when PermitRootLogin is not set to yes and the correct root password is entered (closes: #248747). -- Colin Watson Sun, 28 Nov 2004 12:37:16 +0000 openssh (1:3.8.1p1-8.sarge.3) unstable; urgency=low * Enable threading for PAM, on Sam Hartman's advice (closes: #278394). * debconf template translations: - Update Dutch (thanks, cobaco; closes: #278715). * Correct README.Debian's ForwardX11Trusted description (closes: #280190). -- Colin Watson Fri, 12 Nov 2004 10:31:12 +0000 openssh (1:3.8.1p1-8.sarge.2) unstable; urgency=low * Preserve /etc/ssh/sshd_config ownership/permissions (closes: #276754). * Shorten the version string from the form "OpenSSH_3.8.1p1 Debian 1:3.8.1p1-8.sarge.1" to "OpenSSH_3.8.1p1 Debian-8.sarge.1", as some SSH implementations apparently have problems with the long version string. This is of course a bug in those implementations, but since the extent of the problem is unknown it's best to play safe (closes: #275731). * debconf template translations: - Add Finnish (thanks, Matti Pöllä; closes: #265339). - Update Danish (thanks, Morten Brix Pedersen; closes: #275895). - Update French (thanks, Denis Barbier; closes: #276703). - Update Japanese (thanks, Kenshi Muto; closes: #277438). -- Colin Watson Sun, 24 Oct 2004 17:57:14 +0100 openssh (1:3.8.1p1-8.sarge.1) unstable; urgency=high * If PasswordAuthentication is disabled, then offer to disable ChallengeResponseAuthentication too. The current PAM code will attempt password-style authentication if ChallengeResponseAuthentication is enabled (closes: #250369). * This will ask a question of anyone who installed fresh with 1:3.8p1-2 or later and then upgraded. Sorry about that ... for this reason, the default answer is to leave ChallengeResponseAuthentication enabled. -- Colin Watson Wed, 6 Oct 2004 14:21:55 +0100 openssh (1:3.8.1p1-8) unstable; urgency=high * Matthew Vernon: - Add a GPL exception to the licensing terms of the Debian patch (closes: #211644). -- Colin Watson Thu, 29 Jul 2004 13:28:47 +0100 openssh (1:3.8.1p1-7) unstable; urgency=low * Re-enable shadow password support in openssh-server-udeb, at Bastian Blank's request (closes: #260800). -- Colin Watson Thu, 22 Jul 2004 10:56:06 +0100 openssh (1:3.8.1p1-6) unstable; urgency=low * Implement hack in http://lists.debian.org/debian-boot/2004/07/msg01207.html to get openssh-client-udeb to show up as a retrievable debian-installer component. * Generate host keys in postinst only if the relevant HostKey directives are found in sshd_config (closes: #87946). -- Colin Watson Wed, 21 Jul 2004 15:14:46 +0100 openssh (1:3.8.1p1-5) unstable; urgency=medium * Update German debconf template translation (thanks, Helge Kreutzmann; closes: #252226). * Remove Suggests: dnsutils, as it was only needed for make-ssh-known-hosts (#93265), which has been replaced by ssh-keyscan. * Disable shadow password support in openssh-server-udeb. * Fix non-portable shell constructs in maintainer scripts, Makefile, and ssh-copy-id (thanks, David Weinehall; closes: #258517). * Apply patch from Darren Tucker to make the PAM authentication SIGCHLD handler kill the PAM thread if its waitpid() call returns 0, as well as the previous check for -1 (closes: #252676). * Add scp and sftp to openssh-client-udeb. It might not be very 'u' any more; oh well. -- Colin Watson Sat, 10 Jul 2004 13:57:27 +0100 openssh (1:3.8.1p1-4) unstable; urgency=medium * Kill off PAM thread if privsep slave dies (closes: #248125). -- Colin Watson Fri, 28 May 2004 17:58:45 -0300 openssh (1:3.8.1p1-3) unstable; urgency=low * Add ssh-keygen to openssh-server-udeb. -- Colin Watson Thu, 20 May 2004 16:31:52 +0100 openssh (1:3.8.1p1-2) unstable; urgency=low * Add Catalan debconf template translation (thanks, Aleix Badia i Bosch; closes: #248748). * openssh-client-udeb and openssh-server-udeb depend on libnss-files-udeb (not yet uploaded). * Restore ssh-askpass-gnome binary, lost by mistake. * Don't link against libnsl in udeb builds. -- Colin Watson Thu, 20 May 2004 11:15:58 +0100 openssh (1:3.8.1p1-1) unstable; urgency=low * New upstream release. - Use a longer buffer for tty names in utmp (closes: #247538). * Make sure there's a newline at the end of sshd_config before adding 'UsePAM yes' (closes: #244829). * Generate a new .orig.tar.gz without RFC.nroff, and remove /usr/share/doc/ssh/RFC.gz (closes: #211640). It isn't DFSG-free and only documents the obsolete SSH1 protocol, not to mention that it was never a real RFC but only an Internet-Draft. It's available from http://www.free.lp.se/bamse/draft-ylonen-ssh-protocol-00.txt if you want it for some reason. * Add openssh-client-udeb and openssh-server-udeb binary packages for use in debian-installer. They still need libnss_files to be supplied in udeb form by glibc. * Work around lack of res_query weak alias in libresolv on amd64 (see #242462, awaiting real fix upstream). * Fix grammar in sshd(8) (closes: #238753). * Add .desktop file and icon for ssh-askpass-gnome (closes: #232333). * Update Polish debconf template translation (thanks, Emil Nowak; closes: #242808). * Add Turkish debconf template translation (thanks, Recai Oktaş; closes: #246068). -- Colin Watson Tue, 11 May 2004 23:38:10 +0100 openssh (1:3.8p1-3) unstable; urgency=low * Remove deprecated ReverseMappingCheck option from newly generated sshd_config files (closes: #239987). * Build everything apart from contrib in a subdirectory, to allow for multiple builds. * Some older kernels are missing setresuid() and setresgid(), so don't try to use them. setreuid() and setregid() will do well enough for our purposes (closes: #239999). -- Colin Watson Mon, 5 Apr 2004 21:23:43 +0100 openssh (1:3.8p1-2) unstable; urgency=medium * Disable PasswordAuthentication for new installations (closes: #236810). * Turn off the new ForwardX11Trusted by default, returning to the semantics of 3.7 and earlier, since it seems immature and causes far too many problems with existing setups. See README.Debian for details (closes: #237021). -- Colin Watson Wed, 10 Mar 2004 10:33:07 +0000 openssh (1:3.8p1-1) unstable; urgency=low * New upstream release (closes: #232281): - New PAM implementation based on that in FreeBSD. This runs PAM session modules before dropping privileges (closes: #132681, #150968). - Since PAM session modules are run as root, we can turn pam_limits back on by default, and it no longer spits out "Operation not permitted" to syslog (closes: #171673). - Password expiry works again (closes: #153235). - 'ssh -q' suppresses login banner (closes: #134589). - sshd doesn't lie to PAM about invalid usernames (closes: #157078). - ssh-add prints key comment on each prompt (closes: #181869). - Punctuation formatting fixed in man pages (closes: #191131). - EnableSSHKeysign documented in ssh_config(5) (closes: #224457). * Add 'UsePAM yes' to /etc/ssh/sshd_config on upgrade from versions older than this, to maintain the standard Debian sshd configuration. * Comment out PAMAuthenticationViaKbdInt and RhostsAuthentication in sshd_config on upgrade. Neither option is supported any more. * Privilege separation and PAM are now properly supported together, so remove both debconf questions related to them and simply set it unconditionally in newly generated sshd_config files (closes: #228838). * ServerAliveInterval implemented upstream, so ProtocolKeepAlives is now a compatibility alias. The semantics differ slightly, though; see ssh_config(5) for details. * Implement SSH1 support for ServerAliveInterval using SSH_MSG_IGNORE. As documented in ssh_config(5), it's not as good as the SSH2 version. * Remove -fno-builtin-log, -DHAVE_MMAP_ANON_SHARED, and -D__FILE_OFFSET_BITS=64 compiler options, which are no longer necessary. * Update config.guess and config.sub from autotools-dev 20040105.1. * Darren Tucker: - Reset signal status when starting pam auth thread, prevent hanging during PAM keyboard-interactive authentications. - Fix a non-security-critical segfault in PAM authentication. * Add debconf template translations: - Greek (thanks, Konstantinos Margaritis; closes: #232843). - Italian (thanks, Renato Gini; closes: #234777). -- Colin Watson Sat, 6 Mar 2004 18:43:44 +0000 openssh (1:3.6.1p2-12) unstable; urgency=low * Update Spanish debconf template translation (thanks, Javier Fernández-Sanguino Peña; closes: #228242). * Add debconf template translations: - Czech (thanks, Miroslav Kure; closes: #230110). - Simplified Chinese (thanks, Hiei Xu; closes: #230726). -- Colin Watson Wed, 11 Feb 2004 09:37:57 +0000 openssh (1:3.6.1p2-11) unstable; urgency=low * Comment out pam_limits in default configuration, for now at least (closes: #198254). * Use invoke-rc.d (if it exists) to run the init script. * Backport format string bug fix in sshconnect.c (closes: #225238). * ssh-copy-id exits if ssh fails (closes: #215252). -- Colin Watson Sun, 4 Jan 2004 18:59:21 +0000 openssh (1:3.6.1p2-10) unstable; urgency=low * Use --retry in init script when restarting rather than sleeping, to make sure the old process is dead (thanks, Herbert Xu; closes: #212117). Depend on dpkg (>= 1.9.0) for start-stop-daemon's --retry option. * Update debconf template translations: - Brazilian Portuguese (thanks, Andre Luis Lopes; closes: #219844). - Danish (thanks, Morten Brix Pedersen; closes: #217964). - Japanese (thanks, Kenshi Muto; closes: #212497). - Russian (thanks, Ilgiz Kalmetev). - Spanish (thanks, Carlos Valdivia Yagüe; closes: #211832). * Add Dutch debconf template translation (thanks, cobaco; closes: #215372). * Update config.guess and config.sub from autotools-dev 20031007.1 (closes: #217696). * Implement New World Order for PAM configuration, including /etc/pam.d/common-* from /etc/pam.d/ssh (closes: #212959). - To backport this release to woody, you need to set DEB_BUILD_SSH_WOODY in your environment. See README.Debian. * Add more commentary to /etc/pam.d/ssh. -- Colin Watson Sun, 16 Nov 2003 01:14:16 +0000 openssh (1:3.6.1p2-9) unstable; urgency=high * Merge even more buffer allocation fixes from upstream (CAN-2003-0682; closes: #211434). -- Colin Watson Fri, 19 Sep 2003 10:25:25 +0100 openssh (1:3.6.1p2-8) unstable; urgency=high * Merge more buffer allocation fixes from new upstream version 3.7.1p1 (closes: #211324). -- Colin Watson Wed, 17 Sep 2003 03:07:19 +0100 openssh (1:3.6.1p2-7) unstable; urgency=high * Update debconf template translations: - French (thanks, Christian Perrier; closes: #208801). - Japanese (thanks, Kenshi Muto; closes: #210380). * Some small improvements to the English templates courtesy of Christian Perrier. I've manually unfuzzied a few translations where it was obvious, on Christian's advice, but the others will have to be updated. * Document how to generate an RSA1 host key (closes: #141703). * Incorporate NMU fix for early buffer expansion vulnerability, CAN-2003-0693 (closes: #211205). Thanks to Michael Stone. -- Colin Watson Tue, 16 Sep 2003 14:32:28 +0100 openssh (1:3.6.1p2-6.0) unstable; urgency=high * SECURITY: fix for CAN-2003-0693, buffer allocation error -- Michael Stone Tue, 16 Sep 2003 08:27:07 -0400 openssh (1:3.6.1p2-6) unstable; urgency=medium * Use a more CVS-friendly means of setting SSH_VERSION. * Update Brazilian Portuguese debconf template translation (thanks, Andre Luis Lopes; closes: #208036). * Don't run 'sshd -t' in init script if the server isn't to be run (closes: #197576). * Fix login delay, spurious auth.log entry, and PermitRootLogin information leakage due to PAM issues with upstream's recent security update (thanks, Darren Tucker; closes: #99168, #192207, #193546). * Policy version 3.6.1: recode this changelog to UTF-8. -- Colin Watson Wed, 3 Sep 2003 19:14:02 +0100 openssh (1:3.6.1p2-5) unstable; urgency=low * Disable cmsg_type check for file descriptor passing when running on Linux 2.0 (closes: #150976). Remove comments about non-functional privilege separation on 2.0 from ssh/privsep_ask and ssh/privsep_tell debconf questions and from README.Debian, since it should all now work. * Fix "defails" typo in generated sshd_config (closes: #206484). * Backport upstream patch to strip trailing whitespace (including newlines) from configuration directives (closes: #192079). -- Colin Watson Wed, 27 Aug 2003 02:19:57 +0100 openssh (1:3.6.1p2-4) unstable; urgency=low * getent can get just one key; no need to use grep (thanks, James Troup). * Move /usr/local/bin to the front of the default path, following /etc/login.defs (closes: #201150). * Remove specifics of problematic countries from package description (closes: #197040). * Update Spanish debconf template translation (thanks, Carlos Valdivia Yagüe; closes: #198456). * Backport upstream patch to pass monitor signals through to child (closes: #164797). -- Colin Watson Sun, 27 Jul 2003 17:31:15 +0100 openssh (1:3.6.1p2-3) unstable; urgency=low * Update French debconf template translation (thanks, Christian Perrier; closes: #194323). * Version the adduser dependency for --no-create-home (closes: #195756). * Add a version of moduli(5), namely revision 1.7 of http://www.openbsd.org/cgi-bin/cvsweb/src/share/man/man5/moduli.5 with '/etc/moduli' changed to '/etc/ssh/moduli' throughout (closes: #196061). -- Colin Watson Mon, 9 Jun 2003 02:51:35 +0100 openssh (1:3.6.1p2-2) unstable; urgency=low * Force /etc/default/ssh to be non-executable, since dpkg apparently doesn't deal with permissions changes on conffiles (closes: #192966). * Use debconf 0.5's seen flag rather than the deprecated isdefault. * Add GPL location to copyright file. * Remove debian/postinst.old. * Switch to po-debconf, with some careful manual use of po2debconf to ensure that the source package continues to build smoothly on woody (closes: #183986). * Update debconf template translations: - Brazilian Portugese (thanks, Andre Luis Lopes; see #183986). - Japanese (thanks, Tomohiro KUBOTA; closes: #192429). * Compile with -fno-builtin-log for now, otherwise gcc-3.3 complains "log.h:59: warning: conflicting types for built-in function `log'". The OpenSSH log() function has been renamed in upstream CVS. -- Colin Watson Mon, 19 May 2003 01:52:38 +0100 openssh (1:3.6.1p2-1) unstable; urgency=medium * New upstream release, including fix for PAM user-discovery security hole (closes: #191681). * Fix ChallengeResponseAuthentication default in generated sshd_config (closes: #106037). * Put newlines after full stops in man page documentation for ProtocolKeepAlives and SetupTimeOut. * Policy version 3.5.9: support DEB_BUILD_OPTIONS=noopt, build gnome-ssh-askpass with -g and -Wall flags. * Really ask ssh/new_config debconf question before trying to fetch its value (closes: #188721). * On purge, remove only the files we know about in /etc/ssh rather than the whole thing, and remove the directory if that leaves it empty (closes: #176679). * ssh has depended on debconf for some time now with no complaints, so: - Simplify the postinst by relying on debconf being present. (The absent case was buggy anyway.) - Get rid of "if you have not installed debconf" text in README.Debian, and generally update the "/usr/bin/ssh not SUID" entry. * More README.Debian work: - Reorganize into "UPGRADE ISSUES" and "OTHER ISSUES", in an effort to make it easier for people to find the former. The upgrade issues should probably be sorted by version somehow. - Document X11UseLocalhost under "X11 Forwarding" (closes: #150913). * Fix setting of IP flags for interactive sessions (upstream bug #541). -- Colin Watson Mon, 5 May 2003 17:47:40 +0100 openssh (1:3.6.1p1-1) unstable; urgency=low * New upstream release (thanks, Laurence J. Lane). * debian/control: ssh-askpass-gnome is now Section: gnome, following the override file. -- Colin Watson Wed, 2 Apr 2003 00:51:02 +0100 openssh (1:3.6p1-1) unstable; urgency=low * New upstream release. - Workaround applied upstream for a bug in the interaction of glibc's getaddrinfo() with the Linux 2.2 kernel (closes: #155814). - As such, it should now be safe to remove --with-ipv4-default, so starting sshd with -6 is no longer necessary (closes: #79861 and lots of other merged bugs). - ssh-copy-id prints usage when run without arguments (closes: #71376). - scp exits 1 if ssh fails (closes: #138400). - sshd writes to utmp's ut_addr_v6 field in IPv6 mode (closes: #167867). - 'ssh-add -c' causes ssh-agent to ask the user each time a key is used (closes: #109795). * Install /etc/default/ssh non-executable (closes: #185537). -- Colin Watson Mon, 31 Mar 2003 23:00:59 +0100 openssh (1:3.5p1-5) unstable; urgency=low * Add /etc/default/ssh (closes: #161049). * Run the init script under 'set -e' (closes: #175010). * Change the default superuser path to include /sbin, /usr/sbin, and /usr/local/sbin (closes: #128235, #151267). Using login.defs would be nice, but that belongs to another package. Without a defined API to retrieve its settings, parsing it is off-limits. * Build ssh-askpass-gnome with GNOME 2. The source package should still support building on stable with GNOME 1, using the alternate libgnome-dev build-dependency (thanks, Colin Walters; closes: #167582). -- Colin Watson Sun, 9 Mar 2003 20:12:10 +0000 openssh (1:3.5p1-4) unstable; urgency=low * Point rlogin and rcp alternatives at slogin and scp respectively rather than ssh (closes: #121103, #151666). Fix alternative removal to match; previously it was completely wrong anyway. * Find out whether /etc/ssh/sshd_not_to_be_run exists and set the debconf question's default using that information, rather than using debconf as a registry. Other solutions may be better in the long run, but this is at least correct (thanks, Matthew Woodcraft; closes: #84725). * Stop using pam_lastlog, as it doesn't currently work well as a session module when privilege separation is enabled; it can usually read /var/log/lastlog but can't write to it. Instead, just use sshd's built-in support, already enabled by default (closes: #151297, #169938). * Use 'ssh-keygen -q' rather than redirecting output to /dev/null. * Add a "this may take some time" warning when creating host keys on installation (part of #110094). * When restarting via the init script, check for sshd_not_to_be_run after stopping sshd (idea from Tomas Pospisek; closes: #149850). * Append /usr/sbin:/sbin to the init script's $PATH, just in case of strangeness (closes: #115138). * Fix a dpkg-statoverride call to redirect stdout to /dev/null, not stderr. * Correct copyright file typo: "orignal" -> "original" (closes: #176490). * Rebuild with libssl0.9.7 (closes: #176983). * We're up to policy version 3.5.6. DEB_BUILD_OPTIONS stuff still needs to be looked at. -- Colin Watson Sat, 18 Jan 2003 01:37:23 +0000 openssh (1:3.5p1-3) unstable; urgency=low * Happy new year! * Use getent rather than id to find out whether the sshd user exists (closes: #150974). * Remove some duplication from the postinst's ssh-keysign setuid code. * Replace db_text with db_input throughout debian/config. (db_text has been a compatibility wrapper since debconf 0.1.5.) * Warn about PermitUserEnvironment on upgrade (closes: #167895). * Use 'make install-nokeys', and disable unused debhelper commands, thereby forward-porting the last pieces of Zack Weinberg's patch (closes: #68341). * Move the man page for gnome-ssh-askpass from the ssh package to ssh-askpass-gnome (closes: #174449). * Build with -DLOGIN_NO_ENDOPT, since Debian's /bin/login doesn't accept '--' to terminate the list of options (closes: #171554). * Add Jonathan Amery's ssh-argv0 script (closes: #111341). * Update Danish debconf template (thanks, Morten Brix Pedersen; closes: #174757). * Document setgid ssh-agent's effect on certain environment variables in README.Debian (closes: #167974). * Document interoperability problems between scp and ssh.com's server in README.Debian, and suggest some workarounds (closes: #174662). -- Colin Watson Wed, 1 Jan 2003 14:18:30 +0000 openssh (1:3.5p1-2) unstable; urgency=low * Mention in the ssh package description that it provides both ssh and sshd (closes: #99680). * Create a system group for ssh-agent, not a user group (closes: #167669). -- Colin Watson Mon, 4 Nov 2002 13:43:53 +0000 openssh (1:3.5p1-1) unstable; urgency=low * New upstream release. - Fixes typo in ssh-add usage (closes: #152239). - Fixes 'PermitRootLogin forced-commands-only' (closes: #166184). - ~/.ssh/environment and environment= options in ~/.ssh/authorized_keys are deprecated for security reasons and will eventually go away. For now they can be re-enabled by setting 'PermitUserEnvironment yes' in sshd_config. - ssh-agent is installed setgid to prevent ptrace() attacks. The group actually doesn't matter, as it drops privileges immediately, but to avoid confusion the postinst creates a new 'ssh' group for it. * Obsolete patches: - Solar Designer's privsep+compression patch for Linux 2.2 (see 1:3.3p1-0.0woody1). - Hostbased auth ssh-keysign backport (see 1:3.4p1-4). * Remove duplicated phrase in ssh_config(5) (closes: #152404). * Source the debconf confmodule at the top of the postrm rather than at the bottom, to avoid making future non-idempotency problems worse (see #151035). * Debconf templates: - Add Polish (thanks, Grzegorz Kusnierz). - Update French (thanks, Denis Barbier; closes: #132509). - Update Spanish (thanks, Carlos Valdivia Yagüe; closes: #164716). * Write a man page for gnome-ssh-askpass, and link it to ssh-askpass.1 if this is the selected ssh-askpass alternative (closes: #67775). -- Colin Watson Sat, 26 Oct 2002 19:41:51 +0100 openssh (1:3.4p1-4) unstable; urgency=low * Allow ssh-krb5 in ssh-askpass-gnome's dependencies (closes: #129532). * Restore Russia to list of countries where encryption is problematic (see #148951 and http://www.average.org/freecrypto/). * Drop ssh-askpass-gnome's priority to optional, per the override file. * Drop the PAM special case for hurd-i386 (closes: #99157). * s/dile/idle/ in ssh_config(5) (closes: #118331). * Note in README.Debian that you need xauth from xbase-clients on the server for X11 forwarding (closes: #140269). * Use correct path to upstream README in copyright file (closes: #146037). * Document the units for ProtocolKeepAlives (closes: #159479). * Backport upstream patch to fix hostbased auth (closes: #117114). * Add -g to CFLAGS. -- Colin Watson Sun, 13 Oct 2002 18:58:53 +0100 openssh (1:3.4p1-3) unstable; urgency=low * Add myself to Uploaders: and begin acting as temporary maintainer, at Matthew's request. (Normal service will resume in some months' time.) * Add sharutils to Build-Depends (closes: #138465). * Stop creating the /usr/doc/ssh symlink. * Fix some debconf template typos (closes: #160358). * Split debconf templates into one file per language. * Add debconf template translations: - Brazilian Portuguese (thanks, Andre Luis Lopes; closes: #106173). - Danish (thanks, Claus Hindsgaul; closes: #126607). - Japanese (thanks, Tomohiro KUBOTA; closes: #137427). - Russian (thanks, Ilgiz Kalmetev; closes: #136610). - Spanish (thanks, Carlos Valdivia Yagüe; closes: #129041). * Update debconf template translations: - French (thanks, Igor Genibel; closes: #151361). - German (thanks, Axel Noetzold; closes: #147069). * Some of these translations are fuzzy. Please send updates. -- Colin Watson Sun, 13 Oct 2002 14:09:57 +0100 openssh (1:3.4p1-2) unstable; urgency=high * Get a security-fixed version into unstable * Also tidy README.Debian up a little -- Matthew Vernon Fri, 28 Jun 2002 17:20:59 +0100 openssh (1:3.4p1-1) testing; urgency=high * Extend my tendrils back into this package (Closes: #150915, #151098) * thanks to the security team for their work * no thanks to ISS/Theo de Raadt for their handling of these bugs * save old sshd_configs to sshd_config.dpkg-old when auto-generating a new one * tell/ask the user about PriviledgeSeparation * /etc/init.d/ssh run will now create the chroot empty dir if necessary * Remove our previous statoverride on /usr/bin/ssh (only for people upgrading from a version where we'd put one in ourselves!) * Stop slandering Russia, since someone asked so nicely (Closes: #148951) * Reduce the sleep time in /etc/init.d/ssh during a restart -- Matthew Vernon Fri, 28 Jun 2002 15:52:10 +0100 openssh (1:3.4p1-0.0woody1) testing-security; urgency=high * NMU by the security team. * New upstream version -- Michael Stone Wed, 26 Jun 2002 15:40:38 -0400 openssh (1:3.3p1-0.0woody4) testing-security; urgency=high * NMU by the security team. * fix error when /etc/ssh/sshd_config exists on new install * check that user doesn't exist before running adduser * use openssl internal random unconditionally -- Michael Stone Tue, 25 Jun 2002 19:44:39 -0400 openssh (1:3.3p1-0.0woody3) testing-security; urgency=high * NMU by the security team. * use correct home directory when sshd user is created -- Michael Stone Tue, 25 Jun 2002 08:59:50 -0400 openssh (1:3.3p1-0.0woody2) testing-security; urgency=high * NMU by the security team. * Fix rsa1 key creation (Closes: #150949) * don't fail if sshd user removal fails * depends: on adduser (Closes: #150907) -- Michael Stone Tue, 25 Jun 2002 08:59:50 -0400 openssh (1:3.3p1-0.0woody1) testing-security; urgency=high * NMU by the security team. * New upstream version. - Enable privilege separation by default. * Include patch from Solar Designer for privilege separation and compression on 2.2.x kernels. * Remove --disable-suid-ssh from configure. * Support setuid ssh-keysign binary instead of setuid ssh client. * Check sshd configuration before restarting. -- Daniel Jacobowitz Mon, 24 Jun 2002 13:43:44 -0400 openssh (1:3.0.2p1-9) unstable; urgency=high * Thanks to those who NMUd * The only change in this version is to debian/control - I've removed the bit that says you can't export it from the US - it would look pretty daft to say this about a package in main! Also, it's now OK to use crypto in France, so I've edited that comment slightly * Correct a path in README.Debian too (Closes: #138634) -- Matthew Vernon Sun, 4 Apr 2002 09:52:59 +0100 openssh (1:3.0.2p1-8.3) unstable; urgency=medium * NMU * Really set urgency to medium this time (oops) * Fix priority to standard per override while I'm at it -- Aaron M. Ucko Sun, 24 Mar 2002 09:00:08 -0500 openssh (1:3.0.2p1-8.2) unstable; urgency=low * NMU with maintainer's permission * Prepare for upcoming ssh-nonfree transitional packages per * Urgency medium because it would really be good to get this into woody before it releases * Fix sections to match override file * Reissued due to clash with non-US -> main move -- Aaron M. Ucko Sat, 23 Mar 2002 21:21:52 -0500 openssh (1:3.0.2p1-8.1) unstable; urgency=low * NMU * Move from non-US to mani -- LaMont Jones Thu, 21 Mar 2002 09:33:50 -0700 openssh (1:3.0.2p1-8) unstable; urgency=critical * Security fix - patch from upstream (Closes: #137209, #137210) * Undo the changes in the unreleased -7, since they appear to break things here. Accordingly, the code change is minimal, and I'm happy to get it into testing ASAP -- Matthew Vernon Thu, 7 Mar 2002 14:25:23 +0000 openssh (1:3.0.2p1-7) unstable; urgency=high * Build to support IPv6 and IPv4 by default again -- Matthew Vernon Sat, 2 Mar 2002 00:25:05 +0000 openssh (1:3.0.2p1-6) unstable; urgency=high * Correct error in the clean target (Closes: #130868) -- Matthew Vernon Sat, 26 Jan 2002 00:32:00 +0000 openssh (1:3.0.2p1-5) unstable; urgency=medium * Include the Debian version in our identification, to make it easier to audit networks for patched versions in future -- Matthew Vernon Mon, 21 Jan 2002 17:16:10 +0000 openssh (1:3.0.2p1-4) unstable; urgency=medium * If we're asked to not run sshd, stop any running sshd's first (Closes: #129327) -- Matthew Vernon Wed, 16 Jan 2002 21:24:16 +0000 openssh (1:3.0.2p1-3) unstable; urgency=high * Fix /etc/pam.d/ssh to not set $MAIL (Closes: #128913) * Remove extra debconf suggestion (Closes: #128094) * Mmm. speedy bug-fixing :-) -- Matthew Vernon Sat, 12 Jan 2002 17:23:58 +0000 openssh (1:3.0.2p1-2) unstable; urgency=high * Fix postinst to not automatically overwrite sshd_config (!) (Closes: #127842, #127867) * Add section in README.Debian about the PermitRootLogin setting -- Matthew Vernon Sat, 5 Jan 2003 05:26:30 +0000 openssh (1:3.0.2p1-1) unstable; urgency=high * Incorporate fix from Colin's NMU * New upstream version (fixes the bug Wichert fixed) (Closes: #124035) * Capitalise IETF (Closes: #125379) * Refer to the correct sftp-server location (Closes: #126854, #126224) * Do what we're asked re SetUID ssh (Closes: #124065, #124154, #123247) * Ask people upgrading from potato if they want a new conffile (Closes: #125642) * Fix a typo in postinst (Closes: #122192, #122410, #123440) * Frob the default config a little (Closes: #122284, #125827, #125696, #123854) * Make /etc/init.d/ssh be more clear about ssh not running (Closes: #123552) * Fix typo in templates file (Closes: #123411) -- Matthew Vernon Fri, 4 Jan 2002 16:01:52 +0000 openssh (1:3.0.1p1-1.2) unstable; urgency=high * Non-maintainer upload * Prevent local users from passing environment variables to the login process when UseLogin is enabled -- Wichert Akkerman Mon, 3 Dec 2001 19:34:45 +0100 openssh (1:3.0.1p1-1.1) unstable; urgency=low * Non-maintainer upload, at Matthew's request. * Remove sa_restorer assignment to fix compilation on alpha, hppa, and ia64 (closes: #122086). -- Colin Watson Sun, 2 Dec 2001 18:54:16 +0000 openssh (1:3.0.1p1-1) unstable; urgency=high * New upstream version (Closes: #113646, #113513, #114707, #118564) * Building with a libc that works (!) (Closes: #115228) * Patches forward-ported are -1/-2 options for scp, the improvement to 'waiting for forwarded connections to terminate...' * Fix /etc/init.d/ssh to stop sshd properly (Closes: #115228) * /etc/ssh/sshd_config is no longer a conffile but generated in the postinst * Remove suidregister leftover from postrm * Mention key we are making in the postinst * Default to not enable SSH protocol 1 support, since protocol 2 is much safer anyway. * New version of the vpn-fixes patch, from Ian Jackson * New handling of -q, and added new -qq option; thanks to Jon Amery * Experimental smartcard support not enabled, since I have no way of testing it. -- Matthew Vernon Thu, 28 Nov 2001 17:43:01 +0000 openssh (1:2.9p2-6) unstable; urgency=low * check for correct file in /etc/init.d/ssh (Closes: #110876) * correct location of version 2 keys in ssh.1 (Closes: #110439) * call update-alternatives --quiet (Closes: #103314) * hack ssh-copy-id to chmod go-w (Closes: #95551) * TEMPORARY fix to provide largefile support using a -D in the cflags line. long-term, upstream will patch the autoconf stuff (Closes: #106809, #111849) * remove /etc/rc references in ssh-keygen.1 (Closes: #68350) * scp.1 patch from Adam McKenna to document -r properly (Closes: #76054) * Check for files containing a newline character (Closes: #111692) -- Matthew Vernon Thu, 13 Sep 2001 16:47:36 +0100 openssh (1:2.9p2-5) unstable; urgency=high * Thanks to all the bug-fixers who helped! * remove sa_restorer assignment (Closes: #102837) * patch from Peter Benie to DTRT wrt X forwarding if the server refuses us access (Closes: #48297) * patch from upstream CVS to fix port forwarding (Closes: #107132) * patch from Jonathan Amery to document ssh-keygen behaviour (Closes:#106643, #107512) * patch to postinst from Jonathan Amery (Closes: #106411) * patch to manpage from Jonathan Amery (Closes: #107364) * patch from Matthew Vernon to make -q emit fatal errors as that is the documented behaviour (Closes: #64347) * patch from Ian Jackson to cause us to destroy a file when we scp it onto itself, rather than dumping bits of our memory into it, which was a security hole (see #51955) * patch from Jonathan Amery to document lack of Kerberos support (Closes: #103726) * patch from Matthew Vernon to make the 'waiting for connections to terminate' message more helpful (Closes: #50308) -- Matthew Vernon Thu, 23 Aug 2001 02:14:09 +0100 openssh (1:2.9p2-4) unstable; urgency=high * Today's build of ssh is strawberry flavoured * Patch from mhp to reduce length of time sshd is stopped for (Closes: #106176) * Tidy up debconf template (Closes: #106152) * If called non-setuid, then setgid()'s failure should not be fatal (see #105854) -- Matthew Vernon Sun, 22 Jul 2001 14:19:43 +0100 openssh (1:2.9p2-3) unstable; urgency=low * Patch from yours truly to add -1 and -2 options to scp (Closes: #106061) * Improve the IdentityFile section in the man page (Closes: #106038) -- Matthew Vernon Sat, 21 Jul 2001 14:47:27 +0100 openssh (1:2.9p2-2) unstable; urgency=low * Document the protocol version 2 and IPV6 changes (Closes: #105845, #105868) * Make PrintLastLog 'no' by default (Closes: #105893) -- Matthew Vernon Thu, 19 Jul 2001 18:36:41 +0100 openssh (1:2.9p2-1) unstable; urgency=low * new (several..) upstream version (Closes: #96726, #81856, #96335) * Hopefully, this will close some other bugs too -- Matthew Vernon Tue, 17 Jul 2001 19:41:58 +0100 openssh (1:2.5.2p2-3) unstable; urgency=low * Taking Over this package * Patches from Robert Bihlmeyer for the Hurd (Closes: #102991) * Put PermitRootLogin back to yes (Closes: #67334, #67371, #78274) * Don't fiddle with conf-files any more (Closes: #69501) -- Matthew Vernon Tue, 03 Jul 2001 02:58:13 +0100 openssh (1:2.5.2p2-2.2) unstable; urgency=low * NMU * Include Hurd compatibility patches from Robert Bihlmeyer (Closes: #76033) * Patch from Richard Kettlewell for protocolkeepalives (Closes: #99273) * Patch from Matthew Vernon for BannerTimeOut, batchmode, and documentation for protocolkeepalives. Makes ssh more generally useful for scripting uses (Closes: #82877, #99275) * Set a umask, so ourpidfile isn't world-writable (closes: #100012, #98286, #97391) -- Matthew Vernon Thu, 28 Jun 2001 23:15:42 +0100 openssh (1:2.5.2p2-2.1) unstable; urgency=low * NMU * Remove duplicate Build-Depends for libssl096-dev and change it to depend on libssl-dev instaed. Also adding in virtual | real package style build-deps. (Closes: #93793, #75228) * Removing add-log entry (Closes: #79266) * This was a pam bug from a while back (Closes: #86908, #88457, #86843) * pam build-dep already exists (Closes: #93683) * libgnome-dev build-dep already exists (Closes: #93694) * No longer in non-free (Closes: #85401) * Adding in fr debconf translations (Closes: #83783) * Already suggests xbase-clients (Closes: #79741) * No need to suggest libpam-pwdb anymore (Closes: #81658) * Providing rsh-client (Closes: #79437) * hurd patch was already applied (Closes: #76033) * default set to no (Closes: #73682) * Adding in a suggests for dnsutils (Closes: #93265) * postinst bugs fixed (Closes: #88057, #88066, #88196, #88405, #88612) (Closes: #88774, #88196, #89556, #90123, #90228, #90833, #87814, #85465) * Adding in debconf dependency -- Ivan E. Moore II Mon, 16 Apr 2001 14:11:04 +0100 openssh (1:2.5.2p2-2) unstable; urgency=high * disable the OpenSSL version check in entropy.c (closes: #93581, #93588, #93590, #93614, #93619, #93635, #93648) -- Philip Hands Wed, 11 Apr 2001 20:30:04 +0100 openssh (1:2.5.2p2-1) unstable; urgency=low * New upstream release * removed make-ssh-known-hosts, since ssh-keyscan does that job (closes: #86069, #87748) * fix double space indent in german templates (closes: #89493) * make postinst check for ssh_host_rsa_key * get rid of the last of the misguided debian/rules NMU debris :-/ -- Philip Hands Sat, 24 Mar 2001 20:59:33 +0000 openssh (1:2.5.1p2-2) unstable; urgency=low * rebuild with new debhelper (closes: #89558, #89536, #90225) * fix broken dpkg-statoverride test in postinst (closes: #89612, #90474, #90460, #89605) * NMU bug fixed but not closed in last upload (closes: #88206) -- Philip Hands Fri, 23 Mar 2001 16:11:33 +0000 openssh (1:2.5.1p2-1) unstable; urgency=high * New upstream release * fix typo in postinst (closes: #88110) * revert to setting PAM service name in debian/rules, backing out last NMU, which also (closes: #88101) * restore the pam lastlog/motd lines, lost during the NMUs, and sshd_config * restore printlastlog option patch * revert to using debhelper, which had been partially disabled in NMUs -- Philip Hands Tue, 13 Mar 2001 01:41:34 +0000 openssh (1:2.5.1p1-1.8) unstable; urgency=high * And now the old pam-bug s/sshd/ssh in ssh.c is also fixed -- Christian Kurz Thu, 1 Mar 2001 19:48:01 +0100 openssh (1:2.5.1p1-1.7) unstable; urgency=high * And now we mark the correct binary as setuid, when a user requested to install it setuid. -- Christian Kurz Thu, 1 Mar 2001 07:19:56 +0100 openssh (1:2.5.1p1-1.6) unstable; urgency=high * Fixes postinst to handle overrides that are already there. Damn, I should have noticed the bug earlier. -- Christian Kurz Wed, 28 Feb 2001 22:35:00 +0100 openssh (1:2.5.1p1-1.5) unstable; urgency=high * Rebuild ssh with pam-support. -- Christian Kurz Mon, 26 Feb 2001 21:55:51 +0100 openssh (1:2.5.1p1-1.4) unstable; urgency=low * Added Build-Depends on libssl096-dev. * Fixed sshd_config file to disallow root logins again. -- Christian Kurz Sun, 25 Feb 2001 20:03:55 +0100 openssh (1:2.5.1p1-1.3) unstable; urgency=low * Fixed missing manpages for sftp.1 and ssh-keyscan.1 * Made package policy 3.5.2 compliant. -- Christian Kurz Sun, 25 Feb 2001 15:46:26 +0100 openssh (1:2.5.1p1-1.2) unstable; urgency=low * Added Conflict with sftp, since we now provide our own sftp-client. * Added a fix for our broken dpkg-statoverride call in the 2.3.0p1-13. * Fixed some config pathes in the comments of sshd_config. * Removed ssh-key-exchange-vulnerability-patch since it's not needed anymore because upstream included the fix. -- Christian Kurz Sun, 25 Feb 2001 13:46:58 +0100 openssh (1:2.5.1p1-1.1) unstable; urgency=high * Another NMU to get the new upstream version 2.5.1p1 into unstable. (Closes: #87123) * Corrected postinst to mark ssh as setuid. (Closes: #86391, #85766) * Key Exchange patch is already included by upstream. (Closes: #86015) * Upgrading should be possible now. (Closes: #85525, #85523) * Added --disable-suid-ssh as compile option, so ssh won't get installed suid per default. * Fixed postinst to run dpkg-statoverride only, when dpkg-statoverride is available and the mode of the binary should be 4755. And also added suggestion for a newer dpkg. (Closes: #85734, #85741, #86876) * sftp and ssh-keyscan will also be included from now on. (Closes: #79994) * scp now understands spaces in filenames (Closes: #53783, #58958, #66723) * ssh-keygen now supports showing DSA fingerprints. (Closes: #68623) * ssh doesn' t show motd anymore when switch -t is used. (Closes #69035) * ssh supports the usage of other dsa keys via the ssh command line options. (Closes: #81250) * Documentation in sshd_config fixed. (Closes: #81088) * primes file included by upstream and included now. (Closes: #82101) * scp now allows dots in the username. (Closes: #82477) * Spelling error in ssh-copy-id.1 corrected by upstream. (Closes: #78124) -- Christian Kurz Sun, 25 Feb 2001 10:06:08 +0100 openssh (1:2.3.0p1-1.13) unstable; urgency=low * Config should now also be fixed with this hopefully last NMU. -- Christian Kurz Sat, 10 Feb 2001 22:56:36 +0100 openssh (1:2.3.0p1-1.12) unstable; urgency=high * Added suggest for xbase-clients to control-file. (Closes #85227) * Applied patch from Markus Friedl to fix a vulnerability in the rsa keyexchange. * Fixed position of horizontal line. (Closes: #83613) * Fixed hopefully the grep problem in the config-file. (Closes: #78802) * Converted package from suidregister to dpkg-statoverride. -- Christian Kurz Fri, 9 Feb 2001 19:43:55 +0100 openssh (1:2.3.0p1-1.11) unstable; urgency=medium * Fixed some typos in the german translation of the debconf template. -- Christian Kurz Wed, 24 Jan 2001 18:22:38 +0100 openssh (1:2.3.0p1-1.10) unstable; urgency=medium * Fixed double printing of motd. (Closes: #82618) -- Christian Kurz Tue, 23 Jan 2001 21:03:43 +0100 openssh (1:2.3.0p1-1.9) unstable; urgency=high * And the next NMU which includes the patch from Andrew Bartlett and Markus Friedl to fix the root privileges handling of openssh. (Closes: #82657) -- Christian Kurz Wed, 17 Jan 2001 22:20:54 +0100 openssh (1:2.3.0p1-1.8) unstable; urgency=high * Applied fix from Ryan Murray to allow building on other architectures since the hurd patch was wrong. (Closes: #82471) -- Christian Kurz Tue, 16 Jan 2001 22:45:51 +0100 openssh (1:2.3.0p1-1.7) unstable; urgency=medium * Fixed another typo on sshd_config -- Christian Kurz Sun, 14 Jan 2001 19:01:31 +0100 openssh (1:2.3.0p1-1.6) unstable; urgency=high * Added Build-Dependency on groff (Closes: #81886) * Added Build-Depencency on debhelper (Closes: #82072) * Fixed entry for known_hosts in sshd_config (Closes: #82096) -- Christian Kurz Thu, 11 Jan 2001 23:08:16 +0100 openssh (1:2.3.0p1-1.5) unstable; urgency=high * Fixed now also the problem with sshd used as default ipv4 and didn't use IPv6. This should be now fixed. -- Christian Kurz Thu, 11 Jan 2001 21:25:55 +0100 openssh (1:2.3.0p1-1.4) unstable; urgency=high * Fixed buggy entry in postinst. -- Christian Kurz Wed, 10 Jan 2001 23:12:16 +0100 openssh (1:2.3.0p1-1.3) unstable; urgency=high * After finishing the rewrite of the rules-file I had to notice that the manpage installation was broken. This should now work again. -- Christian Kurz Wed, 10 Jan 2001 22:11:59 +0100 openssh (1:2.3.0p1-1.2) unstable; urgency=high * Fixed the screwed up build-dependency. * Removed --with-ipv4-default to support ipv6. * Changed makefile to use /etc/pam.d/ssh instead of /etc/pam.d/sshd. * Fixed location to sftp-server in config. * Since debian still relies on /etc/pam.d/ssh instead of moving to /etc/pam.d/sshd, I had to hack ssh.h to get ssh to use this name. * Fixed path to host key in sshd_config. -- Christian Kurz Wed, 10 Jan 2001 08:23:47 +0100 openssh (1:2.3.0p1-1.1) unstable; urgency=medium * NMU with permission of Phil Hands. * New upstream release * Update Build-Depends to point to new libssl096. * This upstream release doesn't leak any information depending on the setting of PermitRootLogin (Closes: #59933) * New upstream release contains fix against forcing a client to do X/agent forwarding (Closes: #76788) * Changed template to contain correct path to the documentation (Closes: #67245) * Added --with-4in6 switch as compile option into debian/rules. * Added --with-ipv4-default as compile option into debian/rules. (Closes: #75037) * Changed default path to also contain /usr/local/bin and /usr/X11R6/bin (Closes: #62472,#54567,#62810) * Changed path to sftp-server in sshd_config to match the our package (Closes: #68347) * Replaced OpenBSDh with OpenBSD in the init-script. * Changed location to original source in copyright.head * Changed behaviour of init-script when invoked with the option restart (Closes: #68706,#72560) * Added a note about -L option of scp to README.Debian * ssh won't print now the motd if invoked with -t option (Closes: #59933) * RFC.nroff.gz get's now converted into RFC.gz. (Closes: #63867) * Added a note about tcp-wrapper support to README.Debian (Closes: #72807,#22190) * Removed two unneeded options from building process. * Added sshd.pam into debian dir and install it. * Commented out unnecessary call to dh_installinfo. * Added a line to sshd.pam so that limits will be paid attention to (Closes: #66904) * Restart Option has a Timeout of 10 seconds (Closes: 51264) * scp won't override files anymore (Closes: 51955) * Removed pam_lastlog module, so that the lastlog is now printed only once (Closes: #71742, #68335, #69592, #71495, #77781) * If password is expired, openssh now forces the user to change it. (Closes: #51747) * scp should now have no more problems with shell-init-files that produces ouput (Closes: #56280,#59873) * ssh now prints the motd correctly (Closes: #66926) * ssh upgrade should disable ssh daemon only if users has choosen to do so (Closes: #67478) * ssh can now be installed suid (Closes: #70879) * Modified debian/rules to support hurd. -- Christian Kurz Wed, 27 Dec 2000 20:06:57 +0100 openssh (1:2.2.0p1-1.1) unstable; urgency=medium * Non-Maintainer Upload * Check for new returns in the new libc (closes: #72803, #74393, #72797, #71307, #71702) * Link against libssl095a (closes: #66304) * Correct check for PermitRootLogin (closes: #69448) -- Ryan Murray Wed, 18 Oct 2000 00:48:18 -0700 openssh (1:2.2.0p1-1) unstable; urgency=low * New upstream release -- Philip Hands Mon, 11 Sep 2000 14:49:43 +0100 openssh (1:2.1.1p4-3) unstable; urgency=low * add rsh alternatives * add -S option to scp (using Tommi Virtanen's patch) (closes: #63097) * do the IPV4_DEFAULT thing properly this time -- Philip Hands Fri, 11 Aug 2000 18:14:37 +0100 openssh (1:2.1.1p4-2) unstable; urgency=low * reinstate manpage .out patch from 1:1.2.3 * fix typo in postinst * only compile ssh with IPV4_DEFAULT * apply James Troup's patch to add a -o option to scp and updated manpage -- Philip Hands Sun, 30 Jul 2000 00:12:49 +0100 openssh (1:2.1.1p4-1) unstable; urgency=low * New upstream release -- Philip Hands Sat, 29 Jul 2000 14:46:16 +0100 openssh (1:1.2.3-10) unstable; urgency=low * add version to libpam-modules dependency, because old versions of pam_motd make it impossible to log in. -- Philip Hands Sat, 29 Jul 2000 13:28:22 +0100 openssh (1:1.2.3-9) frozen unstable; urgency=low * force location of /usr/bin/X11/xauth (closes: #64424, #66437, #66859) *RC* * typos in config (closes: #66779, #66780) * sshd_not_to_be_run could be assumed to be true, in error, if the config script died in an unusual way --- I've reversed this (closes: #66335) * Apply Zack Weinberg 's patch to ssh-askpass-ptk (closes: #65981) * change default for PermitRootLogin to "no" (closes: #66406) -- Philip Hands Tue, 11 Jul 2000 20:51:18 +0100 openssh (1:1.2.3-8) frozen unstable; urgency=low * get rid of Provides: rsh-server (this will mean that rstartd will need to change it's depends to deal with #63948, which I'm reopening) (closes: #66257) Given that this is also a trivial change, and is a reversal of a change that was mistakenly made after the freeze, I think this should also go into frozen. -- Philip Hands Wed, 28 Jun 2000 03:26:30 +0100 openssh (1:1.2.3-7) frozen unstable; urgency=low * check if debconf is installed before calling db_stop in postinst. This is required to allow ssh to be installed when debconf is not wanted, which probably makes it an RC upload (hopefully the last of too many). -- Philip Hands Wed, 28 Jun 2000 03:19:47 +0100 openssh (1:1.2.3-6) frozen unstable; urgency=low * fixed depressing little bug involving a line wrap looking like a blank line in the templates file *RC* (closes: #66090, #66078, #66083, #66182) -- Philip Hands Mon, 26 Jun 2000 00:45:05 +0100 openssh (1:1.2.3-5) frozen unstable; urgency=low * add code to prevent UseLogin exploit, although I think our PAM conditional code breaks UseLogin in a way that protects us from this exploit anyway. ;-) (closes: #65495) *RC* * Apply Zack Weinberg 's patch to fix keyboard grab vulnerability in ssh-askpass-gnome (closes: #64795) *RC* * stop redirection of sshd's file descriptors (introduced in 1:1.2.3-3) and use db_stop in the postinst to solve that problem instead (closes: #65104) * add Provides: rsh-server to ssh (closes: #63948) * provide config option not to run sshd -- Philip Hands Mon, 12 Jun 2000 23:05:11 +0100 openssh (1:1.2.3-4) frozen unstable; urgency=low * fixes #63436 which is *RC* * add 10 second pause in init.d restart (closes: #63844) * get rid of noenv in PAM mail line (closes: #63856) * fix host key path in make-ssh-known-hosts (closes: #63713) * change wording of SUID template (closes: #62788, #63436) -- Philip Hands Sat, 27 May 2000 11:18:06 +0100 openssh (1:1.2.3-3) frozen unstable; urgency=low * redirect sshd's file descriptors to /dev/null in init to prevent debconf from locking up during installation ** grave bug just submited by me ** -- Philip Hands Thu, 20 Apr 2000 17:10:59 +0100 openssh (1:1.2.3-2) frozen unstable; urgency=low * allow user to select SUID status of /usr/bin/ssh (closes: 62462) ** RC ** * suggest debconf * conflict with debconf{,-tiny} (<<0.2.17) so I can clean up the preinst -- Philip Hands Wed, 19 Apr 2000 17:49:15 +0100 openssh (1:1.2.3-1) frozen unstable; urgency=low * New upstream release * patch sshd to create extra xauth key required for localhost (closes: #49944) *** RC *** * FallbacktoRsh now defaults to ``no'' to match impression given in sshd_config * stop setting suid bit on ssh (closes: #58711, #58558) This breaks Rhosts authentication (which nobody uses) and allows the LD_PRELOAD trick to get socks working, so seems like a net benefit. -- Philip Hands Thu, 13 Apr 2000 20:01:54 +0100 openssh (1:1.2.2-1.4) frozen unstable; urgency=low * Recompile for frozen, contains fix for RC bug. -- Tommi Virtanen Tue, 29 Feb 2000 22:14:58 +0200 openssh (1:1.2.2-1.3) unstable; urgency=low * Integrated man page addition for PrintLastLog. This bug was filed on "openssh", and I ended up creating my own patch for this (closes: #59054) * Improved error message when ssh_exchange_identification gets EOF (closes: #58904) * Fixed typo (your -> you're) in debian/preinst. * Added else-clauses to config to make this upgradepath possible: oldssh -> openssh preinst fails due to upgrade_to_openssh=false -> ssh-nonfree -> openssh. Without these, debconf remembered the old answer, config didn't force asking it, and preinst always aborted (closes: #56596, #57782) * Moved setting upgrade_to_openssh isdefault flag to the place where preinst would abort. This means no double question to most users, people who currently suffer from "can't upgrade" may need to run apt-get install ssh twice. Did not do the same for use_old_init_script, as the situation is a bit different, and less common (closes: #54010, #56224) * Check for existance of ssh-keygen before attempting to use it in preinst, added warning for non-existant ssh-keygen in config. This happens when the old ssh is removed (say, due to ssh-nonfree getting installed). -- Tommi Virtanen Sun, 27 Feb 2000 21:36:43 +0200 openssh (1:1.2.2-1.2) frozen unstable; urgency=low * Non-maintainer upload. * Added configuration option PrintLastLog, default off due to PAM (closes: #54007, #55042) * ssh-askpass-{gnome,ptk} now provide ssh-askpass, making ssh's Suggests: line more accurate. Also closing related bugs fixed earlier, when default ssh-askpass moved to /usr/bin. (closes: #52403, #54741, #50607, #52298, #50967, #51661) * Patched to call vhangup, with autoconf detection and all (closes: #55379) * Added --with-ipv4-default workaround to a glibc bug causing slow DNS lookups, as per UPGRADING. Use -6 to really use IPv6 addresses. (closes: #57891, #58744, #58713, #57970) * Added noenv to PAM pam_mail line. Thanks to Ben Collins. (closes: #58429) * Added the UPGRADING file to the package. * Added frozen to the changelog line and recompiled before package was installed into the archive. -- Tommi Virtanen Fri, 25 Feb 2000 22:08:57 +0200 openssh (1:1.2.2-1.1) frozen unstable; urgency=low * Non-maintainer upload. * Integrated scp pipe buffer patch from Ben Collins , should now work even if reading a pipe gives less than fstat st_blksize bytes. Should now work on Alpha and Sparc Linux (closes: #53697, #52071) * Made ssh depend on libssl09 (>= 0.9.4-3) (closes: #51393) * Integrated patch from Ben Collins to do full shadow account locking and expiration checking (closes: #58165, #51747) -- Tommi Virtanen Tue, 22 Feb 2000 20:46:12 +0200 openssh (1:1.2.2-1) frozen unstable; urgency=medium * New upstream release (closes: #56870, #56346) * built against new libesd (closes: #56805) * add Colin Watson =NULL patch (closes: #49902, #54894) * use socketpairs as suggested by Andrew Tridgell to eliminate rsync (and other) lockups * patch SSHD_PAM_SERVICE back into auth-pam.c, again :-/ (closes: #49902, #55872, #56959) * uncoment the * line in ssh_config (closes: #56444) * #54894 & #49902 are release critical, so this should go in frozen -- Philip Hands Wed, 9 Feb 2000 04:52:04 +0000 openssh (1:1.2.1pre24-1) unstable; urgency=low * New upstream release -- Philip Hands Fri, 31 Dec 1999 02:47:24 +0000 openssh (1:1.2.1pre23-1) unstable; urgency=low * New upstream release * excape ? in /etc/init.d/ssh (closes: #53269) -- Philip Hands Wed, 29 Dec 1999 16:50:46 +0000 openssh (1:1.2pre17-1) unstable; urgency=low * New upstream release -- Philip Hands Thu, 9 Dec 1999 16:50:40 +0000 openssh (1:1.2pre16-1) unstable; urgency=low * New upstream release * upstream release (1.2pre14) (closes: #50299) * make ssh depend on libwrap0 (>= 7.6-1.1) (closes: #50973, #50776) * dispose of grep -q broken pipe message in config script (closes: #50855) * add make-ssh-known-hosts (closes: #50660) * add -i option to ssh-copy-id (closes: #50657) * add check for *LK* in password, indicating a locked account -- Philip Hands Wed, 8 Dec 1999 22:59:38 +0000 openssh (1:1.2pre13-1) unstable; urgency=low * New upstream release * make sshd.c use SSHD_PAM_SERVICE and define it as "ssh" in debian/rules * remove duplicate line in /etc/pam.d/ssh (closes: #50310) * mention ssh -A option in ssh.1 & ssh_config * enable forwarding to localhost in default ssh_config (closes: #50373) * tweak preinst to deal with debconf being `unpacked' * use --with-tcp-wrappers (closes: #49545) -- Philip Hands Sat, 20 Nov 1999 14:20:04 +0000 openssh (1:1.2pre11-2) unstable; urgency=low * oops, just realised that I forgot to strip out the unpleasant fiddling mentioned below (which turned not to be a fix anyway) -- Philip Hands Mon, 15 Nov 1999 01:35:23 +0000 openssh (1:1.2pre11-1) unstable; urgency=low * New upstream release (closes: #49722) * add 2>/dev/null to dispose of spurious message casused by grep -q (closes: #49876, #49604) * fix typo in debian/control (closes: #49841) * Do some unpleasant fiddling with upgraded keys in the preinst, which should make the keylength problem go away. (closes: #49676) * make pam_start in sshd use ``ssh'' as the service name (closes: #49956) * If /etc/ssh/NOSERVER exist, stop sshd from starting (closes: #47107) * apply Ben Collins 's shadow patch * disable lastlogin and motd printing if using pam (closes: #49957) * add ssh-copy-id script and manpage -- Philip Hands Fri, 12 Nov 1999 01:03:38 +0000 openssh (1:1.2pre9-1) unstable; urgency=low * New upstream release * apply Chip Salzenberg 's SO_REUSEADDR patch to channels.c, to make forwarded ports instantly reusable * replace Pre-Depend: debconf with some check code in preinst * make the ssh-add ssh-askpass failure message more helpful * fix the ssh-agent getopts bug (closes: #49426) * fixed typo on Suggests: line (closes: #49704, #49571) * tidy up ssh package description (closes: #49642) * make ssh suid (closes: #49635) * in preinst upgrade code, ensure ssh_host_keys is mode 600 (closes: #49606) * disable agent forwarding by default, for the similar reasons as X forwarding (closes: #49586) -- Philip Hands Tue, 9 Nov 1999 09:57:47 +0000 openssh (1:1.2pre7-4) unstable; urgency=low * predepend on debconf (>= 0.2.17) should now allow preinst questions -- Philip Hands Sat, 6 Nov 1999 10:31:06 +0000 openssh (1:1.2pre7-3) unstable; urgency=low * add ssh-askpass package using Tommi Virtanen's perl-tk script * add ssh-preconfig package cludge * add usage hints to ssh-agent.1 -- Philip Hands Fri, 5 Nov 1999 00:38:33 +0000 openssh (1:1.2pre7-2) unstable; urgency=low * use pam patch from Ben Collins * add slogin symlink to Makefile.in * change /usr/bin/login to LOGIN_PROGRAM define of /bin/login * sort out debconf usage * patch from Tommi Virtanen 's makes ssh-add use ssh-askpass -- Philip Hands Thu, 4 Nov 1999 11:08:54 +0000 openssh (1:1.2pre7-1) unstable; urgency=low * New upstream release -- Philip Hands Tue, 2 Nov 1999 21:02:37 +0000 openssh (1:1.2.0.pre6db1-2) unstable; urgency=low * change the binary package name to ssh (the non-free branch of ssh has been renamed to ssh-nonfree) * make pam file comply with Debian standards * use an epoch to make sure openssh supercedes ssh-nonfree -- Philip Hands Sat, 30 Oct 1999 16:26:05 +0100 openssh (1.2pre6db1-1) unstable; urgency=low * New upstream source * sshd accepts logins now! -- Dan Brosemer Fri, 29 Oct 1999 11:13:38 -0500 openssh (1.2.0.19991028-1) unstable; urgency=low * New upstream source * Added test for -lnsl to configure script -- Dan Brosemer Thu, 28 Oct 1999 18:52:09 -0500 openssh (1.2.0.19991027-3) unstable; urgency=low * Initial release -- Dan Brosemer Wed, 27 Oct 1999 19:39:46 -0500