5 files changed, 701 insertions, 0 deletions

diff --git a/other/bootstrap_daemon/Makefile.inc b/other/bootstrap_daemon/Makefile.inc
new file mode 100644
index 00000000..b75d935f
--- /dev/null
+++ b/other/bootstrap_daemon/Makefile.inc
@@ -0,0 +1,27 @@
+if BUILD_DHT_BOOTSTRAP_DAEMON
+
+noinst_PROGRAMS += tox_bootstrap_daemon
+
+tox_bootstrap_daemon_SOURCES = \
+                        ../other/bootstrap_daemon/tox_bootstrap_daemon.c
+
+tox_bootstrap_daemon_CFLAGS = \
+                        -I$(top_srcdir)/other/bootstrap_daemon \
+                        $(LIBSODIUM_CFLAGS) \
+                        $(NACL_CFLAGS) \
+                        $(LIBCONFIG_CFLAGS)
+
+tox_bootstrap_daemon_LDADD = \
+                        $(LIBSODIUM_LDFLAGS) \
+                        $(NACL_LDFLAGS) \
+                        libtoxcore.la \
+                        $(LIBCONFIG_LIBS) \
+                        $(LIBSODIUM_LIBS) \
+                        $(NACL_LIBS)
+
+endif
+
+EXTRA_DIST += \
+    $(top_srcdir)/other/bootstrap_daemon/conf \
+    $(top_srcdir)/other/bootstrap_daemon/tox_bootstrap_daemon.sh
+    
\ No newline at end of file
diff --git a/other/bootstrap_daemon/README.md b/other/bootstrap_daemon/README.md
new file mode 100644
index 00000000..53a25cdb
--- /dev/null
+++ b/other/bootstrap_daemon/README.md
@@ -0,0 +1,62 @@
+##Instructions for Debian
+
+The following commands are to be executed as root:
+
+1. In `tox_bootstrap_daemon.sh` file change:
+  - `CFG` to where your config file (`conf`) will be; read rights required
+  - `DAEMON` to point to the executable
+  - `PIDFILE` to point to a pid file daemon would have rights to create
+
+2. Go over everything in `conf`. Make sure `pid_file_path` matches `PIDFILE` from `tox_bootstrap_daemon.sh`
+
+3. Execute: 
+```
+mv tox_bootstrap_daemon.sh /etc/init.d/tox_bootstrap_daemon
+```
+*(note that we removed `.sh` ending)*
+
+4. Give the right permissions to this file: 
+```
+chmod 755 /etc/init.d/tox_bootstrap_daemon
+```
+
+5. Execute: 
+```
+update-rc.d tox_bootstrap_daemon defaults
+```
+
+6. Start the service: 
+```
+service tox_bootstrap_daemon start
+```
+
+7. Verify that the service is running: 
+```
+service tox_bootstrap_daemon status
+```
+
+--
+
+You can see daemon's log with
+```
+grep "tox_bootstrap_daemon" /var/log/syslog
+```
+
+**Note that system log is where you find your public key**
+
+--
+
+###Troubleshooting:
+
+1. Check the log for errors with 
+```
+grep "tox_bootstrap_daemon" /var/log/syslog
+```
+
+2. Check that paths in the beginning of `/etc/init.d/tox_bootstrap_daemon` are valid
+
+3. Make sure that `PIDFILE` from `/etc/init.d/tox_bootstrap_daemon` matches with the `pid_file_path` from `conf`
+
+4. Make sure you have write permission to keys and pid files
+
+5. Make sure you have read permission for config file
\ No newline at end of file
diff --git a/other/bootstrap_daemon/conf b/other/bootstrap_daemon/conf
new file mode 100644
index 00000000..28e638c1
--- /dev/null
+++ b/other/bootstrap_daemon/conf
@@ -0,0 +1,42 @@
+// ProjectTox dht bootstrap node daemon configuration file.
+
+// Listening port.
+port = 33445
+
+// The key file is like a password, so keep it where no one can read it.
+// The daemon should have permission to read/write to it.
+// Remember to replace the provided example with your own path.
+keys_file_path = "/home/tom/.tox_bootstrap_daemon/keys"
+
+// The PID file written to by daemon.
+// Make sure that the user who runs the daemon has permissions to write to the
+// PID file.
+// Remember to replace the provided example with your own path.
+pid_file_path = "/home/tom/.tox_bootstrap_daemon/pid"
+
+// Enable IPv6.
+enable_ipv6 = false
+
+// Automatically bootstrap with nodes on local area network.
+enable_lan_discovery = true
+
+// Any number of nodes the daemon will bootstrap itself from.
+// Remember to replace the provided example with your own node list.
+// There is a maintained list of bootstrap nodes on Tox's wiki, if you need it.
+// You may leave the list empty or remove "bootstrap_nodes" complitely,
+// in both cases this will be interpreted as if you don't want to bootstrap
+// from anyone.
+bootstrap_nodes = (
+  { // Node 1
+    // Any ipv4 or ipv6, depending if `enable_ipv6` is set or not, and also
+    // any US-ASCII domain name.
+    address = "198.46.136.167"
+    port = 33445
+    public_key = "728925473812C7AAC482BE7250BCCAD0B8CB9F737BF3D42ABD34459C1768F854"
+  },
+  { // Node 2
+    address = "example.org"
+    port = 33445
+    public_key = "8CD5A9BF0A6CE358BA36F7A653F99FA6B258FF756E490F52C1F98CC420F78858"
+  }
+)
diff --git a/other/bootstrap_daemon/tox_bootstrap_daemon.c b/other/bootstrap_daemon/tox_bootstrap_daemon.c
new file mode 100644
index 00000000..66f6436d
--- /dev/null
+++ b/other/bootstrap_daemon/tox_bootstrap_daemon.c
@@ -0,0 +1,460 @@
+/* tox_bootstrap_daemon.c
+ *
+ * Tox DHT bootstrap node daemon.
+ *
+ *  Copyright (C) 2014 Tox project All Rights Reserved.
+ *
+ *  This file is part of Tox.
+ *
+ *  Tox is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.
+ *
+ *  Tox is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with Tox.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <unistd.h>
+#include <syslog.h>
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <libconfig.h>
+#include <arpa/inet.h>
+#include <string.h>
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "../../toxcore/DHT.h"
+#include "../../toxcore/friend_requests.h"
+#include "../../toxcore/LAN_discovery.h"
+
+#include "../../testing/misc_tools.c"
+
+#define DAEMON_NAME "tox_bootstrap_daemon"
+
+#define SLEEP_TIME_MILLISECONDS 30
+#define sleep usleep(1000*SLEEP_TIME_MILLISECONDS)
+
+#define DEFAULT_PID_FILE_PATH        ".tox_bootstrap_daemon.pid"
+#define DEFAULT_KEYS_FILE_PATH       ".tox_bootstrap_daemon.keys"
+#define DEFAULT_PORT                 33445
+#define DEFAULT_ENABLE_IPV6          0 // 1 - true, 0 - false
+#define DEFAULT_ENABLE_LAN_DISCOVERY 1 // 1 - true, 0 - false
+
+
+// Uses the already existing key or creates one if it didn't exist
+//
+// retirns 1 on success
+//         0 on failure - no keys were read or stored
+
+int manage_keys(DHT *dht, char *keys_file_path)
+{
+    const uint32_t KEYS_SIZE = crypto_box_PUBLICKEYBYTES + crypto_box_SECRETKEYBYTES;
+    uint8_t keys[KEYS_SIZE];
+    FILE *keys_file;
+
+    // Check if file exits, proceed to open and load keys
+    keys_file = fopen(keys_file_path, "r");
+
+    if (keys_file != NULL) {
+        size_t read_size = fread(keys, sizeof(uint8_t), KEYS_SIZE, keys_file);
+
+        if (read_size != KEYS_SIZE) {
+            return 0;
+        }
+
+        load_keys(dht->c, keys);
+    } else {
+        // Otherwise save new keys
+        new_keys(dht->c);
+        save_keys(dht->c, keys);
+
+        keys_file = fopen(keys_file_path, "w");
+
+        size_t write_size = fwrite(keys, sizeof(uint8_t), KEYS_SIZE, keys_file);
+
+        if (write_size != KEYS_SIZE) {
+            return 0;
+        }
+    }
+
+    fclose(keys_file);
+
+    // We want our DHT public key to be the same as our internal one since this is a bootstrap node
+    memcpy(dht->self_public_key, dht->c->self_public_key, crypto_box_PUBLICKEYBYTES);
+    memcpy(dht->self_secret_key, dht->c->self_secret_key, crypto_box_SECRETKEYBYTES);
+
+    return 1;
+}
+
+// Gets general config options
+//
+// Important: you are responsible for freeing `pid_file_path` and `keys_file_path`
+//
+// returns 1 on success
+//         0 on failure, doesn't modify any data pointed by arguments
+
+int get_general_config(char *cfg_file_path, char **pid_file_path, char **keys_file_path, int *port, int *enable_ipv6,
+                       int *enable_lan_discovery)
+{
+    config_t cfg;
+
+    const char *NAME_PORT                 = "port";
+    const char *NAME_PID_FILE_PATH        = "pid_file_path";
+    const char *NAME_KEYS_FILE_PATH       = "keys_file_path";
+    const char *NAME_ENABLE_IPV6          = "enable_ipv6";
+    const char *NAME_ENABLE_LAN_DISCOVERY = "enable_lan_discovery";
+
+    config_init(&cfg);
+
+    // Read the file. If there is an error, report it and exit.
+    if (config_read_file(&cfg, cfg_file_path) == CONFIG_FALSE) {
+        syslog(LOG_ERR, "%s:%d - %s\n", config_error_file(&cfg), config_error_line(&cfg), config_error_text(&cfg));
+        config_destroy(&cfg);
+        return 0;
+    }
+
+    // Get port
+    if (config_lookup_int(&cfg, NAME_PORT, port) == CONFIG_FALSE) {
+        syslog(LOG_WARNING, "No '%s' setting in configuration file.\n", NAME_PORT);
+        syslog(LOG_WARNING, "Using default '%s': %d\n", NAME_PORT, DEFAULT_PORT);
+        *port = DEFAULT_PORT;
+    }
+
+    // Get PID file location
+    const char *tmp_pid_file;
+
+    if (config_lookup_string(&cfg, NAME_PID_FILE_PATH, &tmp_pid_file) == CONFIG_FALSE) {
+        syslog(LOG_WARNING, "No '%s' setting in configuration file.\n", NAME_PID_FILE_PATH);
+        syslog(LOG_WARNING, "Using default '%s': %s\n", NAME_PID_FILE_PATH, DEFAULT_PID_FILE_PATH);
+        tmp_pid_file = DEFAULT_PID_FILE_PATH;
+    }
+
+    *pid_file_path = malloc(strlen(tmp_pid_file) + 1);
+    strcpy(*pid_file_path, tmp_pid_file);
+
+    // Get keys file location
+    const char *tmp_keys_file;
+
+    if (config_lookup_string(&cfg, NAME_KEYS_FILE_PATH, &tmp_keys_file) == CONFIG_FALSE) {
+        syslog(LOG_WARNING, "No '%s' setting in configuration file.\n", NAME_KEYS_FILE_PATH);
+        syslog(LOG_WARNING, "Using default '%s': %s\n", NAME_KEYS_FILE_PATH, DEFAULT_KEYS_FILE_PATH);
+        tmp_keys_file = DEFAULT_KEYS_FILE_PATH;
+    }
+
+    *keys_file_path = malloc(strlen(tmp_keys_file) + 1);
+    strcpy(*keys_file_path, tmp_keys_file);
+
+    // Get IPv6 option
+    if (config_lookup_bool(&cfg, NAME_ENABLE_IPV6, enable_ipv6) == CONFIG_FALSE) {
+        syslog(LOG_WARNING, "No '%s' setting in configuration file.\n", NAME_ENABLE_IPV6);
+        syslog(LOG_WARNING, "Using default '%s': %s\n", NAME_ENABLE_IPV6, DEFAULT_ENABLE_IPV6 ? "true" : "false");
+        *enable_ipv6 = DEFAULT_ENABLE_IPV6;
+    }
+
+    // Get LAN discovery option
+    if (config_lookup_bool(&cfg, NAME_ENABLE_LAN_DISCOVERY, enable_lan_discovery) == CONFIG_FALSE) {
+        syslog(LOG_WARNING, "No '%s' setting in configuration file.\n", NAME_ENABLE_LAN_DISCOVERY);
+        syslog(LOG_WARNING, "Using default '%s': %s\n", NAME_ENABLE_LAN_DISCOVERY,
+               DEFAULT_ENABLE_LAN_DISCOVERY ? "true" : "false");
+        *enable_lan_discovery = DEFAULT_ENABLE_LAN_DISCOVERY;
+    }
+
+    config_destroy(&cfg);
+
+    syslog(LOG_DEBUG, "Successfully read:\n");
+    syslog(LOG_DEBUG, "'%s': %s\n", NAME_PID_FILE_PATH,        *pid_file_path);
+    syslog(LOG_DEBUG, "'%s': %s\n", NAME_KEYS_FILE_PATH,       *keys_file_path);
+    syslog(LOG_DEBUG, "'%s': %d\n", NAME_PORT,                 *port);
+    syslog(LOG_DEBUG, "'%s': %s\n", NAME_ENABLE_IPV6,          *enable_ipv6          ? "true" : "false");
+    syslog(LOG_DEBUG, "'%s': %s\n", NAME_ENABLE_LAN_DISCOVERY, *enable_lan_discovery ? "true" : "false");
+
+    return 1;
+}
+
+// Bootstraps nodes listed in the config file
+//
+// returns 1 on success, some or no bootstrap nodes were added
+//         0 on failure, a error accured while parsing config file
+
+int bootstrap_from_config(char *cfg_file_path, DHT *dht, int enable_ipv6)
+{
+    const char *NAME_BOOTSTRAP_NODES = "bootstrap_nodes";
+
+    const char *NAME_PUBLIC_KEY = "public_key";
+    const char *NAME_PORT       = "port";
+    const char *NAME_ADDRESS    = "address";
+
+    config_t cfg;
+
+    config_init(&cfg);
+
+    if (config_read_file(&cfg, cfg_file_path) == CONFIG_FALSE) {
+        syslog(LOG_ERR, "%s:%d - %s\n", config_error_file(&cfg), config_error_line(&cfg), config_error_text(&cfg));
+        config_destroy(&cfg);
+        return 0;
+    }
+
+    config_setting_t *node_list = config_lookup(&cfg, NAME_BOOTSTRAP_NODES);
+
+    if (node_list == NULL) {
+        syslog(LOG_WARNING, "No '%s' setting in the configuration file. Skipping bootstrapping.\n", NAME_BOOTSTRAP_NODES);
+        config_destroy(&cfg);
+        return 1;
+    }
+
+    if (config_setting_length(node_list) == 0) {
+        syslog(LOG_WARNING, "No bootstrap nodes found. Skipping bootstrapping.\n");
+        config_destroy(&cfg);
+        return 1;
+    }
+
+    int bs_port;
+    const char *bs_address;
+    const char *bs_public_key;
+
+    config_setting_t *node;
+
+    int i = 0;
+
+    while (config_setting_length(node_list)) {
+
+        node = config_setting_get_elem(node_list, 0);
+
+        if (node == NULL) {
+            config_destroy(&cfg);
+            return 0;
+        }
+
+        // Check that all settings are present
+        if (config_setting_lookup_string(node, NAME_PUBLIC_KEY, &bs_public_key) == CONFIG_FALSE) {
+            syslog(LOG_WARNING, "Bootstrap node #%d: Couldn't find '%s' setting. Skipping the node.\n", i, NAME_PUBLIC_KEY);
+            goto next;
+        }
+
+        if (config_setting_lookup_int(node, NAME_PORT, &bs_port) == CONFIG_FALSE) {
+            syslog(LOG_WARNING, "Bootstrap node #%d: Couldn't find '%s' setting. Skipping the node.\n", i, NAME_PORT);
+            goto next;
+        }
+
+        if (config_setting_lookup_string(node, NAME_ADDRESS, &bs_address) == CONFIG_FALSE) {
+            syslog(LOG_WARNING, "Bootstrap node #%d: Couldn't find '%s' setting. Skipping the node.\n", i, NAME_ADDRESS);
+            goto next;
+        }
+
+        // Process settings
+        if (strlen(bs_public_key) != 64) {
+            syslog(LOG_WARNING, "Bootstrap node #%d: Invalid '%s': %s. Skipping the node.\n", i, NAME_PUBLIC_KEY,
+                   bs_public_key);
+            goto next;
+        }
+
+        // not (1 <= port <= 65535)
+        if (bs_port < 1 || bs_port > 65535) {
+            syslog(LOG_WARNING, "Bootstrap node #%d: Invalid '%s': %d. Skipping the node.\n", i, NAME_PORT, bs_port);
+            goto next;
+        }
+
+        uint8_t *bs_public_key_bin = hex_string_to_bin((char *)bs_public_key);
+        const int address_resolved = DHT_bootstrap_from_address(dht, bs_address, enable_ipv6, htons(bs_port),
+                                     bs_public_key_bin);
+        free(bs_public_key_bin);
+
+        if (!address_resolved) {
+            syslog(LOG_WARNING, "Bootstrap node #%d: Invalid '%s': %s. Skipping the node.\n", i, NAME_ADDRESS, bs_address);
+            goto next;
+        }
+
+        syslog(LOG_DEBUG, "Successfully added bootstrap node #%d: %s:%d %s\n", i, bs_address, bs_port, bs_public_key);
+
+next:
+        // config_setting_lookup_string() allocates string inside and doesn't allow us to free it
+        // so in order to reuse `bs_public_key` and `bs_address` we have to remove the element
+        // which will cause libconfig to free allocated strings
+        config_setting_remove_elem(node_list, 0);
+        i++;
+    }
+
+    config_destroy(&cfg);
+
+    return 1;
+}
+
+// Prints public key
+
+void print_public_key(uint8_t *public_key)
+{
+    char buffer[64 + 1];
+    int index = 0;
+
+    int i;
+
+    for (i = 0; i < 32; i++) {
+        if (public_key[i] < 16) {
+            index += sprintf(buffer + index, "0");
+        }
+
+        index += sprintf(buffer + index, "%hhX", public_key[i]);
+    }
+
+    syslog(LOG_INFO, "Public Key: %s\n", buffer);
+
+    return;
+}
+
+int main(int argc, char *argv[])
+{
+    openlog(DAEMON_NAME, LOG_NOWAIT | LOG_PID, LOG_DAEMON);
+
+    if (argc < 2) {
+        syslog(LOG_ERR, "Please specify a path to a configuration file as the first argument. Exiting.\n");
+        return 1;
+    }
+
+    char *cfg_file_path = argv[1];
+    char *pid_file_path, *keys_file_path;
+    int port;
+    int enable_ipv6;
+    int enable_lan_discovery;
+
+    if (get_general_config(cfg_file_path, &pid_file_path, &keys_file_path, &port, &enable_ipv6, &enable_lan_discovery)) {
+        syslog(LOG_DEBUG, "General config read successfully\n");
+    } else {
+        syslog(LOG_ERR, "Couldn't read config file: %s. Exiting.\n", cfg_file_path);
+        return 1;
+    }
+
+    // not (1 <= port <= 65535)
+    if (port < 1 || port > 65535) {
+        syslog(LOG_ERR, "Invalid port: %d, must be 1 <= port <= 65535. Exiting.\n", port);
+        return 1;
+    }
+
+    // Check if the PID file exists
+    if (fopen(pid_file_path, "r")) {
+        syslog(LOG_ERR, "Another instance of the daemon is already running, PID file %s exists. Exiting.\n", pid_file_path);
+        return 1;
+    }
+
+    IP ip;
+    ip_init(&ip, enable_ipv6);
+
+    DHT *dht = new_DHT(new_net_crypto(new_networking(ip, port)));
+
+    if (dht == NULL) {
+        syslog(LOG_ERR, "Couldn't initialize Tox DHT instance. Exiting.\n");
+        return 1;
+    }
+
+    Onion *onion = new_onion(dht);
+    Onion_Announce *onion_a = new_onion_announce(dht);
+
+    if (!(onion && onion_a)) {
+        syslog(LOG_ERR, "Couldn't initialize Tox Onion. Exiting.\n");
+        return 1;
+    }
+
+    if (enable_lan_discovery) {
+        LANdiscovery_init(dht);
+    }
+
+    if (manage_keys(dht, keys_file_path)) {
+        syslog(LOG_DEBUG, "Keys are managed successfully\n");
+    } else {
+        syslog(LOG_ERR, "Couldn't read/write: %s. Exiting.\n", keys_file_path);
+        return 1;
+    }
+
+    if (bootstrap_from_config(cfg_file_path, dht, enable_ipv6)) {
+        syslog(LOG_DEBUG, "List of bootstrap nodes read successfully\n");
+    } else {
+        syslog(LOG_ERR, "Couldn't read list of bootstrap nodes in %s. Exiting.\n", cfg_file_path);
+        return 1;
+    }
+
+    print_public_key(dht->c->self_public_key);
+
+    // Write the PID file
+    FILE *pidf = fopen(pid_file_path, "w");
+
+    if (pidf == NULL) {
+        syslog(LOG_ERR, "Can't open the PID file for writing: %s. Exiting.\n", pid_file_path);
+        return 1;
+    }
+
+    free(pid_file_path);
+    free(keys_file_path);
+
+    // Fork off from the parent process
+    pid_t pid = fork();
+
+    if (pid < 0) {
+        fclose(pidf);
+        syslog(LOG_ERR, "Forking failed. Exiting.\n");
+        return 1;
+    }
+
+    if (pid > 0) {
+        fprintf(pidf, "%d\n", pid);
+        fclose(pidf);
+        syslog(LOG_DEBUG, "Forked successfully: PID: %d.\n", pid);
+        return 0;
+    }
+
+    // Change the file mode mask
+    umask(0);
+
+    // Create a new SID for the child process
+    if (setsid() < 0) {
+        syslog(LOG_ERR, "SID creation failure. Exiting.\n");
+        return 1;
+    }
+
+    // Change the current working directory
+    if ((chdir("/")) < 0) {
+        syslog(LOG_ERR, "Couldn't change working directory to '/'. Exiting.\n");
+        return 1;
+    }
+
+    // Go quiet
+    close(STDOUT_FILENO);
+    close(STDIN_FILENO);
+    close(STDERR_FILENO);
+
+    uint64_t last_LANdiscovery = 0;
+    uint16_t htons_port = htons(port);
+
+    int waiting_for_dht_connection = 1;
+
+    while (1) {
+        do_DHT(dht);
+
+        if (enable_lan_discovery && is_timeout(last_LANdiscovery, LAN_DISCOVERY_INTERVAL)) {
+            send_LANdiscovery(htons_port, dht);
+            last_LANdiscovery = unix_time();
+        }
+
+        networking_poll(dht->net);
+
+        if (waiting_for_dht_connection && DHT_isconnected(dht)) {
+            syslog(LOG_DEBUG, "Connected to other bootstrap node successfully.\n");
+            waiting_for_dht_connection = 0;
+        }
+
+        sleep;
+    }
+
+    return 1;
+}
diff --git a/other/bootstrap_daemon/tox_bootstrap_daemon.sh b/other/bootstrap_daemon/tox_bootstrap_daemon.sh
new file mode 100644
index 00000000..83d9a119
--- /dev/null
+++ b/other/bootstrap_daemon/tox_bootstrap_daemon.sh
@@ -0,0 +1,110 @@
+#! /bin/sh
+### BEGIN INIT INFO
+# Provides:          tox_bootstrap_daemon
+# Required-Start:    $remote_fs $syslog
+# Required-Stop:     $remote_fs $syslog
+# Default-Start:     2 3 4 5
+# Default-Stop:      0 1 6
+# Short-Description: Starts the Tox DHT bootstrapping server daemon
+# Description:       Starts the Tox DHT bootstrapping server daemon
+### END INIT INFO
+
+# PATH should only include /usr/* if it runs after the mountnfs.sh script
+PATH=/sbin:/usr/sbin:/bin:/usr/bin
+DESC="Tox DHT bootstrap server daemon"
+NAME=tox_bootstrap_daemon
+# You may want to change USER if you are using it anywhere else
+USER=tom
+CFG=/home/$USER/.$NAME/conf
+DAEMON=/home/$USER/$NAME
+DAEMON_ARGS="$CFG"
+PIDFILE=/home/$USER/.$NAME/pid
+SCRIPTNAME=/etc/init.d/$NAME
+
+# Exit if the package is not installed
+[ -x "$DAEMON" ] || exit 0
+
+# Read configuration variable file if it is present
+#[ -r /etc/default/$NAME ] && . /etc/default/$NAME
+
+# Load the VERBOSE setting and other rcS variables
+. /lib/init/vars.sh
+
+# Define LSB log_* functions.
+# Depend on lsb-base (>= 3.2-14) to ensure that this file is present
+# and status_of_proc is working.
+. /lib/lsb/init-functions
+
+#
+# Function that starts the daemon/service
+#
+do_start()
+{
+        start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \
+                || return 1
+        start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON -- \
+                $DAEMON_ARGS \
+                || return 2
+        sleep 1
+}
+
+#
+# Function that stops the daemon/service
+#
+do_stop()
+{
+        start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --exec $DAEMON
+        RETVAL="$?"
+        [ "$RETVAL" = 2 ] && return 2
+
+        start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON
+        [ "$?" = 2 ] && return 2
+        # Many daemons don't delete their pidfiles when they exit.
+        rm -f $PIDFILE
+        return "$RETVAL"
+}
+
+case "$1" in
+  start)
+        [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME"
+        do_start
+        case "$?" in
+                0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
+                2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
+        esac
+        ;;
+  stop)
+        [ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
+        do_stop
+        case "$?" in
+                0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
+                2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
+        esac
+        ;;
+  status)
+        status_of_proc -p $PIDFILE "$DAEMON" "$NAME" && exit 0 || exit $?
+        ;;
+
+  restart) #|force-reload)
+        log_daemon_msg "Restarting $DESC" "$NAME"
+        do_stop
+        case "$?" in
+          0|1)
+                do_start
+                case "$?" in
+                        0) log_end_msg 0 ;;
+                        1) log_end_msg 1 ;; # Old process is still running
+                        *) log_end_msg 1 ;; # Failed to start
+                esac
+                ;;
+          *)
+                # Failed to stop
+                log_end_msg 1
+                ;;
+        esac
+        ;;
+  *)
+        echo "Usage: $SCRIPTNAME {start|stop|status|restart}" >&2
+        exit 3
+        ;;
+esac