5 files changed, 84 insertions, 96 deletions

diff --git a/other/bootstrap_serverdaemon/Makefile.inc b/other/bootstrap_serverdaemon/Makefile.inc
index 5ab17b56..effe59e8 100644
--- a/other/bootstrap_serverdaemon/Makefile.inc
+++ b/other/bootstrap_serverdaemon/Makefile.inc
@@ -1,17 +1,17 @@
 if BUILD_DHT_BOOTSTRAP_DAEMON
 
-noinst_PROGRAMS += tox_dht_bootstrap_server_daemon
+noinst_PROGRAMS += tox_bootstrap_daemon
 
-tox_dht_bootstrap_server_daemon_SOURCES = \
-                        ../other/bootstrap_serverdaemon/tox_dht_bootstrap_server_daemon.c
+tox_bootstrap_daemon_SOURCES = \
+                        ../other/bootstrap_serverdaemon/tox_bootstrap_daemon.c
 
-tox_dht_bootstrap_server_daemon_CFLAGS = \
+tox_bootstrap_daemon_CFLAGS = \
                         -I$(top_srcdir)/other/bootstrap_serverdaemon \
                         $(LIBSODIUM_CFLAGS) \
                         $(NACL_CFLAGS) \
                         $(LIBCONFIG_CFLAGS)
 
-tox_dht_bootstrap_server_daemon_LDADD = \
+tox_bootstrap_daemon_LDADD = \
                         $(LIBSODIUM_LDFLAGS) \
                         $(NACL_LDFLAGS) \
                         libtoxcore.la \
@@ -23,5 +23,5 @@ endif
 
 EXTRA_DIST += \
     $(top_srcdir)/other/bootstrap_serverdaemon/conf \
-    $(top_srcdir)/other/bootstrap_serverdaemon/tox_dht_bootstrap_server_daemon.sh
+    $(top_srcdir)/other/bootstrap_serverdaemon/tox_bootstrap_daemon.sh
     
\ No newline at end of file
diff --git a/other/bootstrap_serverdaemon/README.md b/other/bootstrap_serverdaemon/README.md
index 30cb14aa..53a25cdb 100644
--- a/other/bootstrap_serverdaemon/README.md
+++ b/other/bootstrap_serverdaemon/README.md
@@ -2,44 +2,44 @@
 
 The following commands are to be executed as root:
 
-1. In `tox_dht_bootstrap_server_daemon.sh` file change:
+1. In `tox_bootstrap_daemon.sh` file change:
   - `CFG` to where your config file (`conf`) will be; read rights required
   - `DAEMON` to point to the executable
   - `PIDFILE` to point to a pid file daemon would have rights to create
 
-2. Go over everything in `conf`. Make sure `pid_file_path` matches `PIDFILE` from `tox_dht_bootstrap_server_daemon.sh`
+2. Go over everything in `conf`. Make sure `pid_file_path` matches `PIDFILE` from `tox_bootstrap_daemon.sh`
 
 3. Execute: 
 ```
-mv tox_dht_bootstrap_server_daemon.sh /etc/init.d/tox_dht_bootstrap_server_daemon
+mv tox_bootstrap_daemon.sh /etc/init.d/tox_bootstrap_daemon
 ```
 *(note that we removed `.sh` ending)*
 
 4. Give the right permissions to this file: 
 ```
-chmod 755 /etc/init.d/tox_dht_bootstrap_server_daemon
+chmod 755 /etc/init.d/tox_bootstrap_daemon
 ```
 
 5. Execute: 
 ```
-update-rc.d tox_dht_bootstrap_server_daemon defaults
+update-rc.d tox_bootstrap_daemon defaults
 ```
 
 6. Start the service: 
 ```
-service tox_dht_bootstrap_server_daemon start
+service tox_bootstrap_daemon start
 ```
 
 7. Verify that the service is running: 
 ```
-service tox_dht_bootstrap_server_daemon status
+service tox_bootstrap_daemon status
 ```
 
 --
 
 You can see daemon's log with
 ```
-grep "tox_dht_bootstrap_server_daemon" /var/log/syslog
+grep "tox_bootstrap_daemon" /var/log/syslog
 ```
 
 **Note that system log is where you find your public key**
@@ -50,12 +50,12 @@ grep "tox_dht_bootstrap_server_daemon" /var/log/syslog
 
 1. Check the log for errors with 
 ```
-grep "tox_dht_bootstrap_server_daemon" /var/log/syslog
+grep "tox_bootstrap_daemon" /var/log/syslog
 ```
 
-2. Check that paths in the beginning of `/etc/init.d/tox_dht_bootstrap_server_daemon` are valid
+2. Check that paths in the beginning of `/etc/init.d/tox_bootstrap_daemon` are valid
 
-3. Make sure that `PIDFILE` from `/etc/init.d/tox_dht_bootstrap_server_daemon` matches with the `pid_file_path` from `conf`
+3. Make sure that `PIDFILE` from `/etc/init.d/tox_bootstrap_daemon` matches with the `pid_file_path` from `conf`
 
 4. Make sure you have write permission to keys and pid files
 
diff --git a/other/bootstrap_serverdaemon/conf b/other/bootstrap_serverdaemon/conf
index 70dbdb14..8451d9a0 100644
--- a/other/bootstrap_serverdaemon/conf
+++ b/other/bootstrap_serverdaemon/conf
@@ -1,33 +1,34 @@
-// ProjectTox bootstrap server configuration file
+// ProjectTox dht bootstrap server daemon configuration file.
 
-// listening port
+// Listening port.
 port = 33445
 
-// The key file is like a password, so keep it where no one can read it
-// The daemon should have permission to read/write to it
-// Remember to replace the provided example with
-// your own path
-keys_file_path = "/home/tom/.tox_dht_bootstrap_server_daemon/keys"
+// The key file is like a password, so keep it where no one can read it.
+// The daemon should have permission to read/write to it.
+// Remember to replace the provided example with your own path.
+keys_file_path = "/home/tom/.tox_bootstrap_daemon/keys"
 
-// The PID file written to by daemon,
-// make sure that the user who runs the server
-// does have permissions to write to it
-// Remember to replace the provided example with
-// your own path
-pid_file_path = "/home/tom/.tox_dht_bootstrap_server_daemon/pid"
+// The PID file written to by daemon.
+// Make sure that the user who runs the daemon has permissions to write to the
+// PID file.
+// Remember to replace the provided example with your own path.
+pid_file_path = "/home/tom/.tox_bootstrap_daemon/pid"
 
+// Enable IPv6.
 enable_ipv6 = false
 
-// Automatically bootstrap with nodes on local network
+// Automatically bootstrap with nodes on local area network.
 enable_lan_discovery = true
 
-// Any number of nodes the daemon will bootstrap itself from
-// Remember to replace the provided example with
-// your own server list
+// Any number of servers the daemon will bootstrap itself from.
+// Remember to replace the provided example with your own server list.
+// You may leave the list empty or remove "bootstrap_servers" complitely,
+// in both cases this will be interpreted as if you don't want to bootstrap
+// from anyone.
 bootstrap_servers = (
   { // Server 1
-    // any ipv4 or ipv6, depending if `enable_ipv6` is set or not
-    // also any US-ASCII domain name
+    // Any ipv4 or ipv6, depending if `enable_ipv6` is set or not, and also
+    // any US-ASCII domain name.
     address = "198.46.136.167"
     port = 33445
     public_key = "728925473812C7AAC482BE7250BCCAD0B8CB9F737BF3D42ABD34459C1768F854"
diff --git a/other/bootstrap_serverdaemon/tox_dht_bootstrap_server_daemon.c b/other/bootstrap_serverdaemon/tox_bootstrap_daemon.c
index 24bb8266..e82e49cd 100644
--- a/other/bootstrap_serverdaemon/tox_dht_bootstrap_server_daemon.c
+++ b/other/bootstrap_serverdaemon/tox_bootstrap_daemon.c
@@ -1,6 +1,6 @@
-/* tox_dht_bootstrap_server_daemon
+/* tox_bootstrap_daemon.c
  *
- * A simple DHT bootstrap server for tox - daemon edition.
+ * Tox DHT bootstrap server daemon.
  *
  *  Copyright (C) 2014 Tox project All Rights Reserved.
  *
@@ -42,13 +42,13 @@
 
 #include "../../testing/misc_tools.c"
 
-#define DAEMON_NAME "tox_dht_bootstrap_server_daemon"
+#define DAEMON_NAME "tox_bootstrap_daemon"
 
 #define SLEEP_TIME_MILLISECONDS 30
 #define sleep usleep(1000*SLEEP_TIME_MILLISECONDS)
 
-#define DEFAULT_PID_FILE_PATH        ".tox_dht_bootstrap_server_daemon.pid"
-#define DEFAULT_KEYS_FILE_PATH       ".tox_dht_bootstrap_server_daemon.keys"
+#define DEFAULT_PID_FILE_PATH        ".tox_bootstrap_daemon.pid"
+#define DEFAULT_KEYS_FILE_PATH       ".tox_bootstrap_daemon.keys"
 #define DEFAULT_PORT                 33445
 #define DEFAULT_ENABLE_IPV6          0 // 1 - true, 0 - false
 #define DEFAULT_ENABLE_LAN_DISCOVERY 1 // 1 - true, 0 - false
@@ -186,8 +186,8 @@ int get_general_config(char *cfg_file_path, char **pid_file_path, char **keys_fi
 
 // Bootstraps servers listed in the config file
 //
-// returns 1 on success
-//         0 on failure, either no or only some servers were bootstrapped
+// returns 1 on success, some or no bootstrap servers were added
+//         0 on failure, a error accured while parsing config file
 
 int bootstrap_from_config(char *cfg_file_path, DHT *dht, int enable_ipv6)
 {
@@ -210,9 +210,15 @@ int bootstrap_from_config(char *cfg_file_path, DHT *dht, int enable_ipv6)
     config_setting_t *server_list = config_lookup(&cfg, NAME_BOOTSTRAP_SERVERS);
 
     if (server_list == NULL) {
-        syslog(LOG_ERR, "No '%s' setting in configuration file.\n", NAME_BOOTSTRAP_SERVERS);
+        syslog(LOG_WARNING, "No '%s' setting in the configuration file. Skipping bootstrapping.\n", NAME_BOOTSTRAP_SERVERS);
         config_destroy(&cfg);
-        return 0;
+        return 1;
+    }
+
+    if (config_setting_length(server_list) == 0) {
+        syslog(LOG_WARNING, "No bootstrap servers found. Skipping bootstrapping.\n");
+        config_destroy(&cfg);
+        return 1;
     }
 
     int bs_port;
@@ -232,21 +238,31 @@ int bootstrap_from_config(char *cfg_file_path, DHT *dht, int enable_ipv6)
             return 0;
         }
 
-        // Proceed only if all parts are present
-        if (config_setting_lookup_string(server, NAME_PUBLIC_KEY,  &bs_public_key) == CONFIG_FALSE ||
-                config_setting_lookup_int   (server, NAME_PORT,    &bs_port)       == CONFIG_FALSE ||
-                config_setting_lookup_string(server, NAME_ADDRESS, &bs_address)    == CONFIG_FALSE   ) {
+        // Check that all settings are present
+        if (config_setting_lookup_string(server, NAME_PUBLIC_KEY, &bs_public_key) == CONFIG_FALSE) {
+            syslog(LOG_WARNING, "Bootstrap server #%d: Couldn't find '%s' setting. Skipping the server.\n", i, NAME_PUBLIC_KEY);
             goto next;
         }
 
+        if (config_setting_lookup_int(server, NAME_PORT, &bs_port) == CONFIG_FALSE) {
+            syslog(LOG_WARNING, "Bootstrap server #%d: Couldn't find '%s' setting. Skipping the server.\n", i, NAME_PORT);
+            goto next;
+        }
+
+        if (config_setting_lookup_string(server, NAME_ADDRESS, &bs_address) == CONFIG_FALSE) {
+            syslog(LOG_WARNING, "Bootstrap server #%d: Couldn't find '%s' setting. Skipping the server.\n", i, NAME_ADDRESS);
+            goto next;
+        }
+
+        // Process settings
         if (strlen(bs_public_key) != 64) {
-            syslog(LOG_WARNING, "bootstrap_server #%d: Invalid '%s': %s.\n", i, NAME_PUBLIC_KEY, bs_public_key);
+            syslog(LOG_WARNING, "Bootstrap server #%d: Invalid '%s': %s. Skipping the server.\n", i, NAME_PUBLIC_KEY, bs_public_key);
             goto next;
         }
 
         // not (1 <= port <= 65535)
         if (bs_port < 1 || bs_port > 65535) {
-            syslog(LOG_WARNING, "bootstrap_server #%d: Invalid '%s': %d.\n", i, NAME_PORT, bs_port);
+            syslog(LOG_WARNING, "Bootstrap server #%d: Invalid '%s': %d. Skipping the server.\n", i, NAME_PORT, bs_port);
             goto next;
         }
 
@@ -254,11 +270,11 @@ int bootstrap_from_config(char *cfg_file_path, DHT *dht, int enable_ipv6)
                                      hex_string_to_bin((char *)bs_public_key));
 
         if (!address_resolved) {
-            syslog(LOG_WARNING, "bootstrap_server #%d: Invalid '%s': %s.\n", i, NAME_ADDRESS, bs_address);
+            syslog(LOG_WARNING, "Bootstrap server #%d: Invalid '%s': %s. Skipping the server.\n", i, NAME_ADDRESS, bs_address);
             goto next;
         }
 
-        syslog(LOG_DEBUG, "Successfully connected to %s:%d %s\n", bs_address, bs_port, bs_public_key);
+        syslog(LOG_DEBUG, "Successfully added bootstrap server #%d: %s:%d %s\n", i, bs_address, bs_port, bs_public_key);
 
 next:
         // config_setting_lookup_string() allocates string inside and doesn't allow us to free it
@@ -273,36 +289,6 @@ next:
     return 1;
 }
 
-// Checks if we are connected to the DHT
-//
-// returns 1 on success
-//         0 on failure
-
-int try_connect(DHT *dht, int port, int enable_lan_discovery)
-{
-    uint16_t htons_port = htons(port);
-
-    int i;
-
-    for (i = 0; i < 100; i ++) {
-        do_DHT(dht);
-
-        if (enable_lan_discovery) {
-            send_LANdiscovery(htons_port, dht);
-        }
-
-        networking_poll(dht->c->lossless_udp->net);
-
-        if (DHT_isconnected(dht)) {
-            return 1;
-        }
-
-        sleep;
-    }
-
-    return 0;
-}
-
 // Prints public key
 
 void print_public_key(uint8_t *public_key)
@@ -330,7 +316,7 @@ int main(int argc, char *argv[])
     openlog(DAEMON_NAME, LOG_NOWAIT | LOG_PID, LOG_DAEMON);
 
     if (argc < 2) {
-        syslog(LOG_ERR, "Please specify a configuration file. Exiting.\n");
+        syslog(LOG_ERR, "Please specify a path to a configuration file as the first argument. Exiting.\n");
         return 1;
     }
 
@@ -395,13 +381,6 @@ int main(int argc, char *argv[])
         return 1;
     }
 
-    if (try_connect(dht, port, enable_lan_discovery)) {
-        syslog(LOG_INFO, "Successfully connected to DHT\n");
-    } else {
-        syslog(LOG_ERR, "Couldn't connect to the DHT. Check settings and network connections. Exiting.\n");
-        return 1;
-    }
-
     print_public_key(dht->c->self_public_key);
 
     // Write the PID file
@@ -454,6 +433,8 @@ int main(int argc, char *argv[])
     uint64_t last_LANdiscovery = 0;
     uint16_t htons_port = htons(port);
 
+    int waiting_for_dht_connection = 1;
+
     while (1) {
         do_DHT(dht);
 
@@ -464,6 +445,11 @@ int main(int argc, char *argv[])
 
         networking_poll(dht->net);
 
+        if (waiting_for_dht_connection && DHT_isconnected(dht)) {
+            syslog(LOG_DEBUG, "Connected to other bootstrap server successfully.\n");
+            waiting_for_dht_connection = 0;
+        }
+
         sleep;
     }
 
diff --git a/other/bootstrap_serverdaemon/tox_dht_bootstrap_server_daemon.sh b/other/bootstrap_serverdaemon/tox_bootstrap_daemon.sh
index 678db5e3..83d9a119 100644
--- a/other/bootstrap_serverdaemon/tox_dht_bootstrap_server_daemon.sh
+++ b/other/bootstrap_serverdaemon/tox_bootstrap_daemon.sh
@@ -1,18 +1,19 @@
 #! /bin/sh
 ### BEGIN INIT INFO
-# Provides:          tox_dht_bootstrap_server_daemon
+# Provides:          tox_bootstrap_daemon
 # Required-Start:    $remote_fs $syslog
 # Required-Stop:     $remote_fs $syslog
 # Default-Start:     2 3 4 5
 # Default-Stop:      0 1 6
-# Short-Description: Starts the Tox bootstrapping server
-# Description:       Starts the Tox bootstrapping server
+# Short-Description: Starts the Tox DHT bootstrapping server daemon
+# Description:       Starts the Tox DHT bootstrapping server daemon
 ### END INIT INFO
 
 # PATH should only include /usr/* if it runs after the mountnfs.sh script
 PATH=/sbin:/usr/sbin:/bin:/usr/bin
-DESC="ProjectTox bootstrap server daemon"
-NAME=tox_dht_bootstrap_server_daemon
+DESC="Tox DHT bootstrap server daemon"
+NAME=tox_bootstrap_daemon
+# You may want to change USER if you are using it anywhere else
 USER=tom
 CFG=/home/$USER/.$NAME/conf
 DAEMON=/home/$USER/$NAME