upstream commit

revert to rev1.2; the new bits in this test depend on changes
to ssh that aren't yet committed

Upstream-Regress-ID: 828ffc2c7afcf65d50ff2cf3dfc47a073ad39123

1 files changed, 11 insertions, 42 deletions

diff --git a/regress/cert-file.sh b/regress/cert-file.sh
index 36f7d33f5..b184e7fea 100644
--- a/regress/cert-file.sh
+++ b/regress/cert-file.sh
@@ -1,4 +1,4 @@
-#       $OpenBSD: cert-file.sh,v 1.3 2016/12/16 01:01:07 djm Exp $
+#       $OpenBSD: cert-file.sh,v 1.4 2016/12/16 02:48:55 djm Exp $
 #       Placed in the Public Domain.
 
 tid="ssh with certificates"
@@ -17,59 +17,24 @@ ${SSHKEYGEN} -q -N '' -t ed25519 -f $OBJ/user_key1 || \
         fatal "ssh-keygen failed"
 ${SSHKEYGEN} -q -N '' -t ed25519 -f $OBJ/user_key2 || \
         fatal "ssh-keygen failed"
-${SSHKEYGEN} -q -N '' -t ed25519 -f $OBJ/user_key3 || \
-        fatal "ssh-keygen failed"
-${SSHKEYGEN} -q -N '' -t ed25519 -f $OBJ/user_key4 || \
-        fatal "ssh-keygen failed"
-${SSHKEYGEN} -q -N '' -t ed25519 -f $OBJ/user_key5 || \
-        fatal "ssh-keygen failed"
-
 # Move the certificate to a different address to better control
 # when it is offered.
 ${SSHKEYGEN} -q -s $OBJ/user_ca_key1 -I "regress user key for $USER" \
         -z $$ -n ${USER} $OBJ/user_key1 ||
-                fatal "couldn't sign user_key1 with user_ca_key1"
+                fail "couldn't sign user_key1 with user_ca_key1"
 mv $OBJ/user_key1-cert.pub $OBJ/cert_user_key1_1.pub
 ${SSHKEYGEN} -q -s $OBJ/user_ca_key2 -I "regress user key for $USER" \
         -z $$ -n ${USER} $OBJ/user_key1 ||
-                fatal "couldn't sign user_key1 with user_ca_key2"
+                fail "couldn't sign user_key1 with user_ca_key2"
 mv $OBJ/user_key1-cert.pub $OBJ/cert_user_key1_2.pub
-${SSHKEYGEN} -q -s $OBJ/user_ca_key1 -I "regress user key for $USER" \
-        -z $$ -n ${USER} $OBJ/user_key3 ||
-                fatal "couldn't sign user_key3 with user_ca_key1"
-rm $OBJ/user_key3.pub # to test use of private key w/o public half.
-${SSHKEYGEN} -q -s $OBJ/user_ca_key1 -I "regress user key for $USER" \
-        -z $$ -n ${USER} $OBJ/user_key4 ||
-                fatal "couldn't sign user_key4 with user_ca_key1"
-rm $OBJ/user_key4 $OBJ/user_key4.pub # to test no matching pub/private key case.
 
 trace 'try with identity files'
 opts="-F $OBJ/ssh_proxy -oIdentitiesOnly=yes"
 opts2="$opts -i $OBJ/user_key1 -i $OBJ/user_key2"
 echo "cert-authority $(cat $OBJ/user_ca_key1.pub)" > $OBJ/authorized_keys_$USER
 
-# Make a clean config that doesn't have any pre-added identities.
-cat $OBJ/ssh_proxy | grep -v IdentityFile > $OBJ/no_identity_config
-
-# XXX: verify that certificate used was what we expect. Needs exposure of
-# keys via enviornment variable or similar.
-
 for p in ${SSH_PROTOCOLS}; do
-        # Key with no .pub should work - finding the equivalent *-cert.pub.
-        verbose "protocol $p: identity cert with no plain public file"
-        ${SSH} -F $OBJ/no_identity_config -oIdentitiesOnly=yes \
-            -i $OBJ/user_key3 somehost exit 5$p
-        [ $? -ne 5$p ] && fail "ssh failed"
-
-        # CertificateFile matching private key with no .pub file should work.
-        verbose "protocol $p: CertificateFile with no plain public file"
-        ${SSH} -F $OBJ/no_identity_config -oIdentitiesOnly=yes \
-            -oCertificateFile=$OBJ/user_key3-cert.pub \
-            -i $OBJ/user_key3 somehost exit 5$p
-        [ $? -ne 5$p ] && fail "ssh failed"
-
         # Just keys should fail
-        verbose "protocol $p: plain keys"
         ${SSH} $opts2 somehost exit 5$p
         r=$?
         if [ $r -eq 5$p ]; then
@@ -77,7 +42,6 @@ for p in ${SSH_PROTOCOLS}; do
         fi
 
         # Keys with untrusted cert should fail.
-        verbose "protocol $p: untrusted cert"
         opts3="$opts2 -oCertificateFile=$OBJ/cert_user_key1_2.pub"
         ${SSH} $opts3 somehost exit 5$p
         r=$?
@@ -86,7 +50,6 @@ for p in ${SSH_PROTOCOLS}; do
         fi
 
         # Good cert with bad key should fail.
-        verbose "protocol $p: good cert, bad key"
         opts3="$opts -i $OBJ/user_key2"
         opts3="$opts3 -oCertificateFile=$OBJ/cert_user_key1_1.pub"
         ${SSH} $opts3 somehost exit 5$p
@@ -96,7 +59,6 @@ for p in ${SSH_PROTOCOLS}; do
         fi
 
         # Keys with one trusted cert, should succeed.
-        verbose "protocol $p: single trusted"
         opts3="$opts2 -oCertificateFile=$OBJ/cert_user_key1_1.pub"
         ${SSH} $opts3 somehost exit 5$p
         r=$?
@@ -105,7 +67,6 @@ for p in ${SSH_PROTOCOLS}; do
         fi
 
         # Multiple certs and keys, with one trusted cert, should succeed.
-        verbose "protocol $p: multiple trusted"
         opts3="$opts2 -oCertificateFile=$OBJ/cert_user_key1_2.pub"
         opts3="$opts3 -oCertificateFile=$OBJ/cert_user_key1_1.pub"
         ${SSH} $opts3 somehost exit 5$p
@@ -113,6 +74,14 @@ for p in ${SSH_PROTOCOLS}; do
         if [ $r -ne 5$p ]; then
                 fail "ssh failed with multiple certs in protocol $p"
         fi
+
+        #Keys with trusted certificate specified in config options, should succeed.
+        opts3="$opts2 -oCertificateFile=$OBJ/cert_user_key1_1.pub"
+        ${SSH} $opts3 somehost exit 5$p
+        r=$?
+        if [ $r -ne 5$p ]; then
+                fail "ssh failed with trusted cert in config in protocol $p"
+        fi
 done
 
 #next, using an agent in combination with the keys