1 files changed, 0 insertions, 218 deletions

diff --git a/contrib/solaris/build-pkg b/contrib/solaris/build-pkg
deleted file mode 100755
index fe92d9dda..000000000
--- a/contrib/solaris/build-pkg
+++ /dev/null
@@ -1,218 +0,0 @@
-#!/bin/sh
-
-# OpenSSH solaris build script and supporting data files
-# Copyright (c) 2000 Rip Loomis and
-#   Science Applications International Corporation (SAIC)
-#   (http://www.cist-east.saic.com).  All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in the
-#    documentation and/or other materials provided with the distribution.
-# 3. The name of the author may not be used to endorse or promote products
-#    derived from this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
-# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
-# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
-# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-# Obviously, without all the hard work of the OpenBSD OpenSSH developers
-# and the OpenSSH Portability Team, these scripts would be pointless...
-# so thanks again folks!
-#=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
-
-#### Known issues
-# These methods are generally based on a "default" compilation of
-# OpenSSH on Solaris--so the more things that you change from the default,
-# the greater the chance that something in the script won't be able to
-# handle the changes.  In general, though, most things should be determined
-# from your compile environment--the architecture, SSH version, and
-# other related data should all get picked up by this script.  The script
-# and data files were last updated to match OpenSSH 2.1.1p4.
-#
-# All building and packaging is done under a temporary directory that is
-# itself created under the contrib/solaris directory--so there shouldn't
-# be any special security issues (or need for root access during the
-# packaging process).  The temporary directory is defined below as
-# ${BUILDDIR}.
-#
-# The permissions on the installed files are based on how we prefer to
-# do things here--so nothing is installed SetUID to root.
-#
-# The post-install script makes a good-faith attempt to install a
-# functional configuration on your system.  I would be interested in hearing
-# of any failure modes that are found, as I tried to compensate for all
-# the ones that showed up here when we started replacing all the
-# different installed versions of SSH.
-
-#### Body of the script (finally!)
-# We expect to be building the solaris package under the contrib/solaris
-# directory--but the build-package script might be run with a relative
-# path by a user in the main SSH directory...so we try to handle this
-# case.  Note that this is still a quick and dirty solution, not robust.
-
-if [ -f sshd.c ]; then
-   cd contrib/solaris >/dev/null
-fi
-
-# Locations of standard binaries
-UNAME=/usr/bin/uname
-SED=/usr/bin/sed
-PWD=/usr/bin/pwd
-CUT=/usr/bin/cut
-STRIP=/usr/ccs/bin/strip
-PKGMK=/usr/bin/pkgmk
-PKGTRANS=/usr/bin/pkgtrans
-GREP=/usr/bin/grep
-DATE=/usr/bin/date
-
-CURRDIR=`${PWD}`
-BUILDDIR=${CURRDIR}/build-SSH-package
-# If you really want to name the package "ssh" then go ahead, but the
-# Sun convention is that the first 2-4 characters are supposed to be
-# uppercase representing the company or organization that produced the
-# software, and the next 3-5 characters are supposed to be lowercase
-# identifying the specific software.  The best package names I could
-# come up with were "OBSDssh" or "OPENssh", given those constraints.
-PKGNAME="OPENssh"
-# PSTAMP is a standard setting in the 'pkginfo' file that helps to identify
-# the time and location that the packaging was done.
-PSTAMP="`${UNAME} -n`-`${DATE} +%Y-%m-%d-%H%M`"
-# The several lines below are designed to pull the relevant information
-# out of the Makefile.  It may be simpler to hard-code this if you have
-# made changes and these lines don't find them. 
-prefix=`${GREP} "^prefix=" ../../Makefile | ${CUT} -d = -f 2`
-execprefix=`${GREP} "^execprefix=" ../../Makefile | ${CUT} -d = -f 2`
-INSTROOT=${prefix:=/usr/local}
-ETCDIR=`${GREP} "^ETCDIR=" ../../Makefile | ${CUT} -d = -f 2`
-PIDDIR=`${GREP} "^piddir=" ../../Makefile | ${CUT} -d = -f 2`
-
-if [ ! -f ../../sshd ]; then
-   echo "Unable to locate sshd binary where I expected, and can't continue."
-   echo "Verify that the SSH configure/make has been completed, and that"
-   echo "  this script is being run from within the SSH source tree."
-   exit 1
-fi
-
-
-VERSION=`${GREP} "SSH_VERSION" ../../version.h | ${CUT} -f 2 | sed -e 's/"//g' -e 's/OpenSSH_//g'`
-# Extra shenanigans to compensate for Sun marketeer tricks with Solaris
-# version numbering...
-OSMINOR=`${UNAME} -r | ${CUT} -f 2 -d .`
-if [ $OSMINOR -gt 6 ]; then
-    OSVERSION=$OSMINOR
-else
-    OSVERSION=`${UNAME} -r | ${SED} 's/5/2/'`
-fi
-ARCH=`$UNAME -p`
-SHORTINSTROOT=""
-if [ "$INSTROOT" = "/usr/local" ]; then
-  SHORTINSTROOT="-local"
-else
-  if [ "$INSTROOT" = "/opt" ]; then
-    SHORTINSTROOT="-opt"
-  fi
-fi
-
-DESTFILE="${PKGNAME}-${VERSION}-sol${OSVERSION}-${ARCH}${SHORTINSTROOT}"
-
-echo "Building Solaris package of OpenSSH ${VERSION} in\n\t${BUILDDIR}."
-echo "Binaries were compiled for Solaris ${OSVERSION} (${ARCH})"
-echo "The installable package will be named ${DESTFILE}."
-echo "When installed, the package will be located under ${INSTROOT}."
-echo ""
-
-echo "Cleaning up old build files..."
-rm -rf $BUILDDIR
-mkdir $BUILDDIR
-cd $BUILDDIR
-
-echo "Setting up build directories..."
-mkdir -p ${BUILDDIR}/man/man1
-# Need manpages for sshd_config(5) and ssh_config(5), but we don't yet have.
-#mkdir -p ${BUILDDIR}/man/man5
-mkdir -p ${BUILDDIR}/man/man8
-mkdir -p ${BUILDDIR}/etc
-mkdir -p ${BUILDDIR}/bin
-mkdir -p ${BUILDDIR}/libexec
-mkdir -p ${BUILDDIR}/sbin
-
-echo "Populating build directories..."
-cp -p ../../../sshd sbin
-cp -p ../../../ssh-keygen bin
-cp -p ../../../ssh-keyscan bin
-cp -p ../../../ssh bin
-cp -p ../../../ssh-add bin
-cp -p ../../../ssh-agent bin
-cp -p ../../../scp bin
-cp -p ../../../scp.1.out man/man1/scp.1
-cp -p ../../../sftp bin
-cp -p ../../../sftp.1.out man/man1/sftp.1
-cp -p ../../../sftp-server libexec/sftp-server
-cp -p ../../../sftp-server.8.out man/man8/sftp-server.8
-cp -p ../../../ssh-add.1.out man/man1/ssh-add.1
-cp -p ../../../ssh-agent.1.out man/man1/ssh-agent.1
-cp -p ../../../ssh-keygen.1.out man/man1/ssh-keygen.1
-cp -p ../../../ssh-keyscan.1.out man/man1/ssh-keyscan.1
-cp -p ../../../ssh.1.out man/man1/ssh.1
-cp -p ../../../sshd.8.out man/man8/sshd.8
-cp -p ../../../sshd_config.out etc/sshd_config.default 
-cp -p ../../../ssh_config.out etc/ssh_config.default
-cp -p ../../../ssh_prng_cmds etc/ssh_prng_cmds.default
-cp -p ../../../primes etc/primes.default
-
-# One of the annoying things about the Solaris packaging process is that
-# there's no simple way to prototype on the fly--so make sure you edit
-# the prototype file if you add/subtract files from the mix.
-cp -p ../prototype .
-cp -p ../preremove .
-
-echo "Creating compile-dependent files from their prototypes"
-$SED -e "s/%%PKGNAME%%/${PKGNAME}/g" -e "s|%%BASEDIR%%|${INSTROOT}|g" -e "s/%%VERSION%%/${VERSION}/g" -e "s/%%ARCH%%/${ARCH}/g" -e "s/%%OSVERSION%%/${OSVERSION}/g" <../pkginfo.in >./pkginfo
-$SED -e "s/%%PKGNAME%%/${PKGNAME}/g" -e "s/%%OSMINOR%%/${OSMINOR}/g" -e "s/%%OSVERSION%%/${OSVERSION}/g" <../checkinstall.in >./checkinstall
-$SED -e "s|%%PIDDIR%%|${PIDDIR}|g" <../postinstall.in >./postinstall
-$SED -e "s|%%PIDDIR%%|${PIDDIR}|g" <../sshd-initscript.in > etc/sshd-initscript
-
-echo "Stripping binaries"
-${STRIP} bin/ssh
-${STRIP} bin/ssh-add
-${STRIP} bin/ssh-agent
-${STRIP} bin/ssh-keygen
-${STRIP} bin/ssh-keyscan
-${STRIP} sbin/sshd
-${STRIP} bin/scp
-${STRIP} bin/sftp
-${STRIP} libexec/sftp-server
-
-echo ""
-echo "Building Package"
-
-cd ${BUILDDIR}
-$PKGMK -o -r . -p ${PSTAMP} -d ${BUILDDIR}
-
-if [ $? -gt 0 ]; then
-   echo "Error performing pkgmk--cannot continue."
-   exit 1
-fi
-
-echo ""
-echo "Translating Package Tree into Installable Image"
-$PKGTRANS -s ${BUILDDIR} ${BUILDDIR}/${DESTFILE} OPENssh
-
-if [ $? -gt 0 ]; then
-   echo "Error performing pkgtrans--cannot continue."
-   exit 1
-fi
-
-echo "Done.  Package is in ${BUILDDIR}/${DESTFILE} !"