summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-08-07New upstream release (7.3p1).Colin Watson
2016-08-07Various Debian-specific configuration changesColin Watson
ssh: Enable ForwardX11Trusted, returning to earlier semantics which cause fewer problems with existing setups (http://bugs.debian.org/237021). ssh: Set 'SendEnv LANG LC_*' by default (http://bugs.debian.org/264024). ssh: Enable HashKnownHosts by default to try to limit the spread of ssh worms. ssh: Enable GSSAPIAuthentication and disable GSSAPIDelegateCredentials by default. Document all of this, along with several sshd defaults set in debian/openssh-server.postinst. Author: Russ Allbery <rra@debian.org> Forwarded: not-needed Last-Update: 2015-12-07 Patch-Name: debian-config.patch
2016-08-07Add systemd readiness notification supportMichael Biebl
Bug-Debian: https://bugs.debian.org/778913 Forwarded: no Last-Update: 2016-01-04 Patch-Name: systemd-readiness.patch
2016-08-07Support synchronisation with service supervisor using SIGSTOPColin Watson
Author: Robie Basak <robie.basak@ubuntu.com> Forwarded: no Last-Update: 2014-04-14 Patch-Name: sigstop.patch
2016-08-07Give the ssh-askpass-gnome window a default iconVincent Untz
Bug-Ubuntu: https://bugs.launchpad.net/bugs/27152 Last-Update: 2010-02-28 Patch-Name: gnome-ssh-askpass2-icon.patch
2016-08-07Don't check the status field of the OpenSSL versionKurt Roeckx
There is no reason to check the version of OpenSSL (in Debian). If it's not compatible the soname will change. OpenSSH seems to want to do a check for the soname based on the version number, but wants to keep the status of the release the same. Remove that check on the status since it doesn't tell you anything about how compatible that version is. Author: Colin Watson <cjwatson@debian.org> Bug-Debian: https://bugs.debian.org/93581 Bug-Debian: https://bugs.debian.org/664383 Bug-Debian: https://bugs.debian.org/732940 Forwarded: not-needed Last-Update: 2014-10-07 Patch-Name: no-openssl-version-status.patch
2016-08-07Document consequences of ssh-agent being setgid in ssh-agent(1)Colin Watson
Bug-Debian: http://bugs.debian.org/711623 Forwarded: no Last-Update: 2013-06-08 Patch-Name: ssh-agent-setgid.patch
2016-08-07Refer to ssh's Upstart job as well as its init scriptColin Watson
Forwarded: not-needed Last-Update: 2013-09-14 Patch-Name: doc-upstart.patch
2016-08-07Document that HashKnownHosts may break tab-completionColin Watson
Bug: https://bugzilla.mindrot.org/show_bug.cgi?id=1727 Bug-Debian: http://bugs.debian.org/430154 Last-Update: 2013-09-14 Patch-Name: doc-hash-tab-completion.patch
2016-08-07ssh(1): Refer to ssh-argv0(1)Colin Watson
Old versions of OpenSSH (up to 2.5 or thereabouts) allowed creating symlinks to ssh with the name of the host you want to connect to. Debian ships an ssh-argv0 script restoring this feature; this patch refers to its manual page from ssh(1). Bug-Debian: http://bugs.debian.org/111341 Forwarded: not-needed Last-Update: 2013-09-14 Patch-Name: ssh-argv0.patch
2016-08-07Adjust various OpenBSD-specific references in manual pagesColin Watson
No single bug reference for this patch, but history includes: http://bugs.debian.org/154434 (login.conf(5)) http://bugs.debian.org/513417 (/etc/rc) http://bugs.debian.org/530692 (ssl(8)) https://bugs.launchpad.net/bugs/456660 (ssl(8)) Forwarded: not-needed Last-Update: 2014-10-07 Patch-Name: openbsd-docs.patch
2016-08-07Install authorized_keys(5) as a symlink to sshd(8)Tomas Pospisek
Bug: https://bugzilla.mindrot.org/show_bug.cgi?id=1720 Bug-Debian: http://bugs.debian.org/441817 Last-Update: 2013-09-14 Patch-Name: authorized-keys-man-symlink.patch
2016-08-07Add DebianBanner server configuration optionKees Cook
Setting this to "no" causes sshd to omit the Debian revision from its initial protocol handshake, for those scared by package-versioning.patch. Bug-Debian: http://bugs.debian.org/562048 Forwarded: not-needed Last-Update: 2015-11-29 Patch-Name: debian-banner.patch
2016-08-07Include the Debian version in our identificationMatthew Vernon
This makes it easier to audit networks for versions patched against security vulnerabilities. It has little detrimental effect, as attackers will generally just try attacks rather than bothering to scan for vulnerable-looking version strings. (However, see debian-banner.patch.) Forwarded: not-needed Last-Update: 2013-09-14 Patch-Name: package-versioning.patch
2016-08-07Mention ssh-keygen in ssh fingerprint changed warningScott Moser
Bug: https://bugzilla.mindrot.org/show_bug.cgi?id=1843 Bug-Ubuntu: https://bugs.launchpad.net/bugs/686607 Last-Update: 2015-09-08 Patch-Name: mention-ssh-keygen-on-keychange.patch
2016-08-07Quieten logs when multiple from= restrictions are usedColin Watson
Bug-Debian: http://bugs.debian.org/630606 Forwarded: no Last-Update: 2013-09-14 Patch-Name: auth-log-verbosity.patch
2016-08-07Force use of DNSSEC even if "options edns0" isn't in resolv.confColin Watson
This allows SSHFP DNS records to be verified if glibc 2.11 is installed. Origin: vendor, https://cvs.fedoraproject.org/viewvc/F-12/openssh/openssh-5.2p1-edns.patch?revision=1.1&view=markup Bug: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=572049 Bug-Debian: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=572049 Last-Update: 2010-04-06 Patch-Name: dnssec-sshfp.patch
2016-08-07Look for $SHELL on the path for ProxyCommand/LocalCommandColin Watson
There's some debate on the upstream bug about whether POSIX requires this. I (Colin Watson) agree with Vincent and think it does. Bug: https://bugzilla.mindrot.org/show_bug.cgi?id=1494 Bug-Debian: http://bugs.debian.org/492728 Last-Update: 2013-09-14 Patch-Name: shell-path.patch
2016-08-07Adjust scp quoting in verbose modeNicolas Valcárcel
Tweak scp's reporting of filenames in verbose mode to be a bit less confusing with spaces. This should be revised to mimic real shell quoting. Bug-Ubuntu: https://bugs.launchpad.net/bugs/89945 Last-Update: 2010-02-27 Patch-Name: scp-quoting.patch
2016-08-07Allow harmless group-writabilityColin Watson
Allow secure files (~/.ssh/config, ~/.ssh/authorized_keys, etc.) to be group-writable, provided that the group in question contains only the file's owner. Rejected upstream for IMO incorrect reasons (e.g. a misunderstanding about the contents of gr->gr_mem). Given that per-user groups and umask 002 are the default setup in Debian (for good reasons - this makes operating in setgid directories with other groups much easier), we need to permit this by default. Bug: https://bugzilla.mindrot.org/show_bug.cgi?id=1060 Bug-Debian: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=314347 Last-Update: 2013-09-14 Patch-Name: user-group-modes.patch
2016-08-07Mention ~& when waiting for forwarded connections to terminateMatthew Vernon
Bug-Debian: http://bugs.debian.org/50308 Last-Update: 2010-02-27 Patch-Name: helpful-wait-terminate.patch
2016-08-07Reduce severity of "Killed by signal %d"Peter Samuelson
This produces irritating messages when using ProxyCommand or other programs that use ssh under the covers (e.g. Subversion). These messages are more normally printed by the calling program, such as the shell. According to the upstream bug, the right way to avoid this is to use the -q option, so we may drop this patch after further investigation into whether any software in Debian is still relying on it. Author: Colin Watson <cjwatson@debian.org> Bug: https://bugzilla.mindrot.org/show_bug.cgi?id=1118 Bug-Debian: http://bugs.debian.org/313371 Last-Update: 2013-09-14 Patch-Name: quieter-signals.patch
2016-08-07"LogLevel SILENT" compatibilityJonathan David Amery
"LogLevel SILENT" (-qq) was introduced in Debian openssh 1:3.0.1p1-1 to match the behaviour of non-free SSH, in which -q does not suppress fatal errors. However, this was unintentionally broken in 1:4.6p1-2 and nobody complained, so we've dropped most of it. The parts that remain are basic configuration file compatibility, and an adjustment to "Pseudo-terminal will not be allocated ..." which should be split out into a separate patch. Author: Matthew Vernon <matthew@debian.org> Author: Colin Watson <cjwatson@debian.org> Last-Update: 2013-09-14 Patch-Name: syslog-level-silent.patch
2016-08-07Various keepalive extensionsRichard Kettlewell
Add compatibility aliases for ProtocolKeepAlives and SetupTimeOut, supported in previous versions of Debian's OpenSSH package but since superseded by ServerAliveInterval. (We're probably stuck with this bit for compatibility.) In batch mode, default ServerAliveInterval to five minutes. Adjust documentation to match and to give some more advice on use of keepalives. Author: Ian Jackson <ian@chiark.greenend.org.uk> Author: Matthew Vernon <matthew@debian.org> Author: Colin Watson <cjwatson@debian.org> Last-Update: 2015-11-29 Patch-Name: keepalive-extensions.patch
2016-08-07Accept obsolete ssh-vulnkey configuration optionsColin Watson
These options were used as part of Debian's response to CVE-2008-0166. Nearly six years later, we no longer need to continue carrying the bulk of that patch, but we do need to avoid failing when the associated configuration options are still present. Last-Update: 2014-02-09 Patch-Name: ssh-vulnkey-compat.patch
2016-08-07Handle SELinux authorisation rolesManoj Srivastava
Rejected upstream due to discomfort with magic usernames; a better approach will need an SSH protocol change. In the meantime, this came from Debian's SELinux maintainer, so we'll keep it until we have something better. Bug: https://bugzilla.mindrot.org/show_bug.cgi?id=1641 Bug-Debian: http://bugs.debian.org/394795 Last-Update: 2015-08-19 Patch-Name: selinux-role.patch
2016-08-07Restore TCP wrappers supportColin Watson
Support for TCP wrappers was dropped in OpenSSH 6.7. See this message and thread: https://lists.mindrot.org/pipermail/openssh-unix-dev/2014-April/032497.html It is true that this reduces preauth attack surface in sshd. On the other hand, this support seems to be quite widely used, and abruptly dropping it (from the perspective of users who don't read openssh-unix-dev) could easily cause more serious problems in practice. It's not entirely clear what the right long-term answer for Debian is, but it at least probably doesn't involve dropping this feature shortly before a freeze. Forwarded: not-needed Last-Update: 2014-10-07 Patch-Name: restore-tcp-wrappers.patch
2016-08-07GSSAPI key exchange supportSimon Wilkinson
This patch has been rejected upstream: "None of the OpenSSH developers are in favour of adding this, and this situation has not changed for several years. This is not a slight on Simon's patch, which is of fine quality, but just that a) we don't trust GSSAPI implementations that much and b) we don't like adding new KEX since they are pre-auth attack surface. This one is particularly scary, since it requires hooks out to typically root-owned system resources." However, quite a lot of people rely on this in Debian, and it's better to have it merged into the main openssh package rather than having separate -krb5 packages (as we used to have). It seems to have a generally good security history. Bug: https://bugzilla.mindrot.org/show_bug.cgi?id=1242 Last-Updated: 2016-08-07 Patch-Name: gssapi.patch
2016-08-06Import openssh_7.3p1.orig.tar.gzColin Watson
2016-07-29releasing package openssh version 1:7.2p2-8Colin Watson
2016-07-29debian/openssh-server.if-up: Don't block on a finished reload of openssh.serviceMartin Pitt
This avoids deadlocking with restarting networking. LP: #1584393
2016-07-29Add systemd user unit for graphical sessions that use systemdMartin Pitt
Override the corresponding upstart job in that case.
2016-07-29Add debian/agent-launch: Helper script for conditionally starting the SSH ↵Martin Pitt
agent in the user session Use it in ssh-agent.user-session.upstart. This will also be used in a corresponding systemd user unit. This replaces the backgrounded "ssh-agent -s" with a foreground task which works more nicely with modern init systems for logging/debugging and starting/stopping. Also use a fixed socket file name in $XDG_RUNTIME_DIR -- under both upstart and systemd we can assume this, and it allows restarting the service in a running session.
2016-07-29Stop enabling ssh-session-cleanup.service by default; instead, ship it as an ↵Colin Watson
example and add a section to README.Debian. libpam-systemd >= 230 and "UsePAM yes" should take care of the original problem for most systemd users (thanks, Michael Biebl; closes: #832155).
2016-07-28define _OPENBSD_SOURCE for reallocarray on NetBSDDamien Miller
Report by and debugged with Hisashi T Fujinaka, dtucker nailed the problem (lack of prototype causing return type confusion).
2016-07-27KNFDamien Miller
2016-07-27Linux auditing also needs packet.hDamien Miller
2016-07-27fix auditing on LinuxDamien Miller
get_remote_ipaddr() was replaced with ssh_remote_ipaddr()
2016-07-24crank version numbersDamien Miller
2016-07-24upstream commitdjm@openbsd.org
openssh-7.3 Upstream-ID: af106a7eb665f642648cf1993e162c899f358718
2016-07-23releasing package openssh version 1:7.2p2-7Colin Watson
2016-07-23Add note about upgrade problems.Colin Watson
2016-07-23Recommend libpam-systemd from openssh-server. It's a much better solution ↵Colin Watson
than the above for systemd users, but I'm wary of depending on it in case I cause an assortment of exciting dependency problems on upgrade for non-systemd users.
2016-07-23Don't stop the ssh-session-cleanup service on upgrade (closes: #832155).Colin Watson
2016-07-23Move Cygwin IPPORT_RESERVED overrride to defines.hDarren Tucker
Patch from vinschen at redhat.com.
2016-07-23upstream commitdjm@openbsd.org
fix pledge violation with ssh -f; reported by Valentin Kozamernik ok dtucker@ Upstream-ID: a61db7988db88d9dac3c4dd70e18876a8edf84aa
2016-07-23upstream commitdjm@openbsd.org
improve wording; suggested by jmc@ Upstream-ID: 55cb0a24c8e0618b3ceec80998dc82c85db2d2f8
2016-07-23upstream commitdtucker@openbsd.org
Lower loglevel for "Authenticated with partial success" message similar to other similar level. bz#2599, patch from cgallek at gmail.com, ok markus@ Upstream-ID: 3faab814e947dc7b2e292edede23e94c608cb4dd
2016-07-22releasing package openssh version 1:7.2p2-6Colin Watson
2016-07-22Fix typo.Colin Watson
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-08 08:51:44 +0000